Page 1 of 4 Bulk, Impact Flexible ?Guide Coat Sandable Primer Surfacer - Black
MATERIAL SAFETY DATA SHEET
MORTON PAINT COMPANY FOR CHEMICAL EMERGENCY SPILL, LEAK, FIRE
US Chemical & Plastics EXPOSURE OR ACCIDENT, CALL DAY OR NIGHT
IN USA: CHEMTREC 1-800-424-9300
Alco Industries Companies
600 Nova Dr SE FOR CANADA CALL COLLECT
Massillon, OH 44646 CANUTEC 1-613-996-6666
Phone (330) 830-6000 Fax: (330) 830-6005
==========================================================================================
SECTION I - IDENTIFICATION OF PRODUCT
__________________________________________________________________________________________
PRODUCT NAME: Impact Flexible Primer/Surfacer - Satin Black
SYNONYM OR CROSS REFERENCE: Acrylic Lacquer Primer
PRODUCT CODE: (999030), 201-1, 201-4, 201-5, 214 Bulk
PROPER SHIPPING NAME: Paint, Flammable Liquid, UN1263
==========================================================================================
SECTION II - HAZARDOUS INGREDIENTS
__________________________________________________________________________________________
INGREDIENTS WEIGHT % CAS NUMBER TLV/PEL
Proprietary Synthetic 15-20% N/Av N/E
Resins
TLV: 3 mg/m3
Carbon Black 1-5% 1333-86-4
TLV: 2 mg/m3
Talc 10-20% 14807-96-6
(Non-asbestos Type)
Toluene 20-30% 108-88-3 PEL: 100 ppm
PM Acetate 5-10% 108-65-6 N/E
Methyl Ethyl Ketone 15-20% 78-93-3 PEL: 200 ppm
Isobutyl Acetate 10-15% 110-19-0 PEL: 150 ppm
========================================================================================
SECTION III - PHYSICAL DATA
__________________________________________________________________________________________
APPEARANCE: Black Liquid VAPOR DENSITY: Heavier than air
SPECIFIC GRAVITY: 1.07 EVAPORATION RATE: (Diethyl Ether = 1)
VAPOR PRESSURE (mmHg): N/Av Slower than Diethyl Ether
BOILING POINT: N/Av VOLATILES BY WEIGHT: Approx. 61%
MELTING POINT: N/Av SOLUBILITY IN WATER: Insoluble
VOC (less water and exempts): 620 Grams/Liter 5.20 lbs/gal
Page 2 of 4 Bulk, Impact Flexible ?Guide Coat Sandable Primer Surfacer - Black
=======================================================================================
SECTION IV - FIRE AND EXPLOSION DATA
__________________________________________________________________________________________
FLASH POINT: 45oF/7癈 Seta Flash Closed Cup
LOWER FLAMMABLE LIMIT %: N/E
UPPER FLAMMABLE LIMIT %: N/E
FIRE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam.
SPECIAL FIRE FIGHTING PROCEDURES: Fight like a fuel oil fire. Cool fire exposed containers with water spray. Fire
Fighter should wear OSHA/NIOSH approved self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARD: (Conditions of Flammability) Combustible. Closed containers exposed to high
temperatures, such as fire conditions may rupture.
=======================================================================================
SECTION V - HEALTH HAZARD/TOXICOLOGICAL PROPERTIES
__________________________________________________________________________________________
OVEREXPOSURE EFFECTS:
ACUTE EFFECTS:
EYES - Contact with eyes can cause irritation, redness, tearing, blurred vision, and/or swelling.
SKIN - Contact with skin can cause irritation, (minor itching, burning and/or redness), Dermatitis, defatting may
be readily absorbed through the skin.
INHALATION - Inhalation of vapors can cause nasal and respiratory irritation, dizziness, weakness, fatigue,
nausea, headache, possible unconsciousness and/or asphyxiation. Aspiration of material into lungs may result in
chemical pneumonitis which can be fatal. May be toxic.
INGESTION - Ingestion can cause gastrointestinal irritation, nausea, vomiting, diarrhea.
CHRONIC EFFECTS:
Overexposure to this material has apparently been known to cause the following effects in lab animals: anemia,
kidney, lung, brain, eye, cardiac, liver damage
CARCINOGENIC TOLUENE STATEMENT (API STUDY, 1986) Prolonged
YES X NO
TERATOGEN YES X NO breathing of 2,000 ppm Toluene by pregnant rats was toxic to
MUTAGEN YES X NO their fetuses (reduced body weight, delayed ossification,
skeletal variation), but was not teratogenic.
ROUTES OF EXPOSURE: Skin contact, inhalation
FIRST AID:
INHALATION -If inhaled, remove victim from exposure to well ventilated area. Make him/her comfortably warm, but not
hot. Use oxygen or artificial respiration as required. Consult a physician.
SKIN - For skin contact, wash promptly with soap and excess water. Consult a physician.
EYES - For eye contact, flush promptly with excess water. Consult a physician.
INGESTION - If ingested, do not induce vomiting. Call a physician immediately.
=========================================================================================
SECTION VI - REACTIVITY DATA
__________________________________________________________________________________________
STABILITY: Stable
CONDITIONS TO AVOID: Open flames, sparks, heat, electrical and static discharge.
INCOMPATIBILITY MATERIALS TO AVOID: Strong acids, alkalis, oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS: Unknown other than Carbon Dioxide, Carbon Monoxide and Carbon
HAZARDOUS POLYMERIZATION: Will not occur.
Page 3 of 4 Bulk, Impact Flexible ?Guide Coat Sandable Primer Surfacer - Black
========================================================================================
SECTION VII - SPILL AND DISPOSAL PROCEDURE
__________________________________________________________________________________________
SPILLS, LEAK OR RELEASE: Ventilate area. Remove all possible sources of ignition. Avoid prolonged breathing of vapor.
Contain spill with inert absorbent and clean up with spark-proof tools.
WASTE DISPOSAL: Dispose of in accordance with local, state, and federal regulations.
==========================================================================================
SECTION VIII - PROTECTION INFORMATION
__________________________________________________________________________________________
RESPIRATORY PROTECTION: Use NIOSH/MSHA TC23C chemical/mechanical type filter system to remove a combination of
particles, gas, and vapors. Use an air supplied respirator if necessary.
VENTILATION: Use adequate ventilation in volume and pattern to keep TLV/PEL below recommended levels and flammable
limits in air below the level necessary to product explosion or fire. General mechanical ventilation should comply with OSHA
1910.94.
PROTECTIVE GLOVES: To prevent prolonged exposure, use rubber gloves, solvents may be absorbed through the skin.
EYE PROTECTION: Safety Glasses or goggles with splash guards or side shields.
OTHER PROTECTIVE EQUIPMENT: Wear protective clothing as required to prevent skin contact.
========================================================================================
SECTION IX - HANDLING AND STORAGE PRECAUTIONS
__________________________________________________________________________________________
STORAGE AND HANDLING: Use with adequate ventilation. Harmful or fatal if swallowed! Extremely flammable. Avoid
contact with eyes and skin. Avoid breathing vapors. Do not store the product above 100oF/38oC. Do not flame, cut, braze weld or
melt empty containers. Keep the product away from heat, open flame, and other sources of ignition. Avoid contact with strong acids,
alkalis and oxidizers.
========================================================================================
SECTION X - ADDITIONAL INFORMATION
__________________________________________________________________________________________
SHIPPING INFORMATION: Please comply with DOT regulations in USA
HMIS RATING: Health 2 4 = Extreme
Fire 3 3 = High
Reactivity 1 2 = Moderate
Personal Protection - See Section VIII 1 = Slight
0 = Insignificant
========================================================================================
CALIFORNIA PROPOSITION 65:
WARNING: This product contains Toluene, a chemical known to the State of California to cause birth defects or other
reproductive harm.
SECTION 313 SUPPLIER NOTIFICATION:
Chemical Name CAS Number Weight Percentage
Toluene 108-88-3 20-30%
This information must be included on all MSDS that are copied or distributed.
Page 4 of 4 Bulk, Impact Flexible ?Guide Coat Sandable Primer Surfacer - Black
==========================================================================================
ABBREVIATIONS:
IARC = International Agency for Research N/AV = Not Available
on Cancer
ACGIH = American Conference of Governmental N/AP = Not Applicable
Industrial Hygienists
NIOSH = National Institute of Occupational N/E = Not Established
Safety and Health
DOT = Department of Transportation NTP = National Toxicology Program
TLV = Threshold Limit Value PEL = Permissible Emission Level
==========================================================================================
REFERENCES
1. ACGIH. Threshold Limit Values and Biological Exposure Indices for 1988-89
2. Material Safety Data Sheets of raw materials
3. Dangerous Properties of Industrial Materials, 7th Edition, N. Irving Sax and Richard J. Lewis.
PREPARED BY: MORTON PAINT COMPANY
US Chemical & Plastics
Alco Industries Companies
600 Nova Dr SE
Massillon, OH 44646
Telephone (330) 830-6000
DATE REVIEWED: April 30, 2007
DATE REVISED: April 30, 2007
REVISION: Section II, III, X
The information in the Material Safety Data Sheet has been compiled from our experience and data presented in various technical
publications. It is the user's responsibility to determine the suitability of this information for the adoption of the safety precautions as
may be necessary. We reserve the right to revise Material Safety Data Sheets from time to time as new technical information becomes
available. The user has the responsibility to contact the Company to make sure that the sheet is the latest one issued.
|