CYCLO?INDUSTRIES, LLC
MATERIAL SAFETY DATA SHEET
This MSDS is being provided to your company for the purpose of providing current health and safety
information to your management and for your employees who work with this product. Please read the
information on these sheets and then provide this information to those people at your company whose
responsibility it is to comply with FEDERAL, STATE and COMMUNITY RIGHT TO KNOW regulations.
Also, make this information available to any employee who requests it.
If Cyclo Industries, LLC considers the formula of this product to be a trade secret, the exact chemical names
of the ingredient(s) and the percentages in which they are combined will not appear in the body of this sheet.
The exact composition is available upon request to physicians, industrial hygienists and other health
professionals.
SECTION 1 ?PRODUCT & COMPANY IDENTIFICATION
Cyclo?Electronic Contact Cleaner, Stock No. C-86
Product Name:
Product Use: Use for printed circuits, relays, points, plugs, contacts, tape heads, tuners, etc.
Manufactured by: Cyclo Industries, LLC
10190 Riverside Drive, Palm Beach Gardens, Florida 33410-4881
Telephone: (561) 775-9600
First Aid Emergency: (800) 752-7869 or (312) 906-6194
Shipping Emergency: (800) 424-9300 or (703) 527-3887 (CHEMTREC)
SECTION 2 ?COMPOSITION/INFORMATION ON INGREDIENTS
CAS Reg. No. Material Percentage Exposure Limits
1717-00-6 1,1-Dichloro-1-fluoroethane 80 ?100 Not established = OSHA PEL
Not established = ACGIH TLV
67-63-0 2-Propanol, Isopropyl alcohol 0 ?10 400 ppm = OSHA PEL
400 ppm = ACGIH TLV
124-38-9 Carbon dioxide 0 ?10 10000 ppm = OSHA PEL
5000 ppm = ACGIH TLV
SECTION 3 ?HAZARDS IDENTIFICATION
Effects of Overexposure:
Ingestion: Not a likely route of exposure.
Inhalation: Narcosis, asphyxiation, loss of coordination, increased pulse rate, cardiac
sensitization, deeper respiration and cardiac arrhythmia. Do not give ephinepherine
or similar drugs.
Skin Contact: Contact may dry the skin. Prolonged contact may cause irritation. Not easily
absorbed. Solvent action can dry and defat the skin causing the skin to crack,
leading to dermatitis.
Eye Contact: Prolonged contact may cause irritation due to defatting.
Cyclo?C-86 Electronic Contact Cleaner MSDS - Page 2 of 5
SECTION 3 ?HAZARDS IDENTIFICATION continued
Health Hazards (Acute and Chronic):
ACUTE: Eye irritant, skin irritant, narcotic in high concentrations.
CHRONIC: Not known.
Carcinogenicity: NTP Carcinogen = No; IARC Monographs = No; OSHA Regulated = No
Medical Conditions Generally Aggravated by Exposure: None known.
SECTION 4 ?FIRST AID MEASURES
First Aid Procedures:
Ingestion: If swallowed, do NOT induce vomiting. Seek immediate medical advice and/or
attention.
Skin Contact: Wipe off with towel. Wash with soap and water. Get medical attention if irritation
persists.
Inhalation: Remove to fresh air. Administer oxygen if needed. Apply artificial respiration if
breathing has stopped. Get medical attention.
Eye Contact: Wash immediately with large volumes of fresh water for at least 15 minutes. Get
medical attention.
SECTION 5 ?FIRE FIGHTING MEASURES
Flash Point: None Method Used: TCC
Flammable Limits in Air by Volume:
Lower Explosion Level (LEL) = 2 Upper Explosion Level (UEL) = 15.5
Extinguishing Media: Foam, alcohol foam, CO2, dry chemical, water fog
Special Fire Fighting Procedures: Water spray may be ineffective. Water may be used to cool containers
to prevent pressure build-up and explosion when exposed to extreme heat. If water is used, fog
nozzles preferred. Wear goggles and self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Closed containers may explode from internal pressure build-up
when exposed to extreme heat and discharge contents. Liquid content of container will not support
combustion. Overexposure to decomposition products may cause a health hazard. Symptoms may
not be readily apparent. Obtain medical attention.
HMIS Code: Health = 1 Flammability = 2 Reactivity = 0
SECTION 6 ?ACCIDENTAL RELEASE MEASURES
Spill/Leak Procedures: Avoid breathing vapors. Ventilate area. Remove all sources of ignition. Clean
up area with absorbent material and place in closed containers for disposal.
Cyclo?C-86 Electronic Contact Cleaner MSDS - Page 3 of 5
SECTION 7 ?HANDLING AND STORAGE
Handling Procedures: Store and use in cool, dry, well-ventilated areas. Do not puncture or incinerate
(burn) cans. Do not stick pin, nail or any other sharp object into opening on top of can. Do not spray
in eyes. Do not take internally. See product label for additional information. KEEP OUT OF THE
REACH OF CHILDREN.
Storage Procedures: Store and use in cool, dry, well-ventilated areas. Do not store above 120癋. The
storage of non-flammable products with non-flammable or flammable pressurizing agent, in cartons,
is the same as for ordinary canned goods in cartons.
SECTION 8 ?EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory Protection: None under normal use. Avoid breathing vapors. In restricted areas, use
approved chemical/mechanical filters designed to remove a combination of particles and vapor. In
confined areas, use approved air line type respirator or hood. Self-contained breathing apparatus
is required for vapor concentrations above PEL/TLV limits.
Ventilation: Sufficient to prevent inhalation of solvent vapors. General dilution and/or local exhaust
ventilation in volume or pattern to keep PEL/TLV of most hazardous ingredient below acceptable
limit and LEL below stated limit.
Protective Gloves: None under normal use. Solvent resistant required for prolonged or repeated contact.
Eye Protection: None under normal use, however, safety glasses with splash guards or full face shield is
recommended.
Other Protective Equipment: None under normal use, however, use of solvent resistant apron or other
clothing is recommended.
Work/Hygienic Practices: Eye washes and safety showers in the workplace are recommended.
SECTION 9 ?PHYSICAL AND CHEMICAL PROPERTIES
Boiling Range: 89.6癋 - 177癋 (32癈 -80癈) Specific Gravity (H2O=1): 1.19
Vapor Pressure: mm Hg @ Temp. Vapor Density: Heavier than air
1,1-Dichloro-1-Fluoroethane 500 68
2-Propanol, Isopropyl Alcohol 33 68 Solubility in Water: Nil
Carbon dioxode 38650 60
Evaporation Rate (Butyl Acetate = 1): Slower than ether
Appearance and Odor: Aerosol product
Cyclo?C-86 Electronic Contact Cleaner MSDS - Page 4 of 5
SECTION 10 ?STABILITY AND REACTIVITY
Stability: Stable
Conditions to Avoid: Application to hot surfaces. Storage above 120癋. Exposure to open flame.
Incompatibility (materials to avoid): Freshly abraded aluminum surfaces; aluminum, magnesium and zinc
powders; chemically active metals such as Na, K or Ca.
Hazardous Decomposition or Byproducts: Decomposition fumes may contain carbon monoxide, halogen
acids and possibly carbonyl halides such as phosgene.
Hazardous Polymerization: Will not occur.
SECTION 11 ?TOXICOLOGICAL INFORMATION
Long-term toxicological studies have not been conducted for this product. See Section 3 of this MSDS for
acute symptoms of overexposure and carcinogenicity information.
SECTION 12 ?ECOLOGICAL INFORMATION
Aquatic/Terrestrial No data is available at this time.
Toxicity
Environmental Fate
SECTION 13 ?DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of in accordance with local, state and federal regulations. Before
attempting clean up, refer to other sections of this MSDS for hazard caution information.
SECTION 14 ?TRANSPORT INFORMATION
U.S. DOT
Shipping Description: Aerosol, Consumer Commodity ORM-D
ID Number: Not applicable
Hazard Class: Not applicable
Packing Group: Not applicable
Label: Not applicable
Placards: Not applicable
IMDG
Shipping Description: Aerosol, Limited Quantity
ID Number: 1950
Hazard Class: 2
Packing Group: Not required
Label: Not applicable
Markings: Not applicable
Placards: Not required
Cyclo?C-86 Electronic Contact Cleaner MSDS - Page 5 of 5
SECTION 15 ?REGULATORY INFORMATION
TSCA Inventory: All of the ingredients in this product are listed on the TSCA Inventory
SARA Extremely
Hazardous Substances None
SARA Section 313 This product contains the following toxic chemical subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40 CFR Part 372 (SARA 313 ?Toxic Chemical Release Reporting)
Chemical Name CAS# Weight %
1,1-Dichloro-1-fluoroethane 1717-00-6 80 - 100
CERCLA/Superfund (RQ): This product is not subject to CERC LA reporting requirements. Many states
have more stringent release reporting requirements. Report spills required under federal, state and
local regulations.
California Proposition 65: This product does not contain chemicals known to the State of California to
cause cancer, birth defects and other reproductive harm.
SECTION 16 ?OTHER INFORMATION
Volatile Organic Compound (VOC): 6.2%
Document Date: 3/31/03 Supersedes: 11/17/00
Revisions: Section 11 ?Added entire section, Section 12 ?Added entire section, Section 14 ?Added
entire section, Section 15 ?Added entire section and Section 16 - VOC.
Cyclo Industries, LLC provides the information contained herein in good faith but makes no representation
as to its comprehensiveness or accuracy. Individuals receiving this information must exercise their
independent judgement in determining its appropriateness for a particular purpose. Cyclo Industries, LLC
makes no representations or warranties, either expressed or implied, of merchantability, fitness for a
particular purpose with respect to the information set forth herein or to the product to which the information
refers. Accordingly, Cyclo Industries, LLC will not be responsible for damages resulting from use of or
reliance upon this information.
|