CYCLO?INDUSTRIES, LLC
MATERIAL SAFETY DATA SHEET
This MSDS is being provided to your company for the purpose of providing current health and safety
information to your management and for your employees who work with this product. Please read the
information on these sheets and then provide this information to those people at your company whose
responsibility it is to comply with FEDERAL, STATE and COMMUNITY RIGHT TO KNOW regulations.
Also, make this information available to any employee who requests it.
If Cyclo Industries, LLC considers the formula of this product to be a trade secret, the exact chemical names
of the ingredient(s) and the percentages in which they are combined will not appear in the body of this sheet.
The exact composition is available upon request to physicians, industrial hygienists and other health
professionals.
SECTION 1 ?PRODUCT & COMPANY IDENTIFICATION
Cyclo?Belt Dressing, Stock No. C-124
Product Name:
Product Use: Helps condition and preserve new and used fan belts and motor-driven belts
Manufactured by: Cyclo Industries, LLC
10190 Riverside Drive, Palm Beach Gardens, Florida 33410-4881
Telephone: (561) 775-9600
First Aid Emergency: (800) 752-7869 or (312) 906-6194
Shipping Emergency: (800) 424-9300 or (703) 527-3887 (CHEMTREC)
SECTION 2 ?COMPOSITION/INFORMATION ON INGREDIENTS
CAS Reg. No. Material Percentage Exposure Limits
142-82-5 Heptane 15 ?30 400 ppm = OSHA PEL
400 ppm = ACGIH TLV
110-54-3 Hexane (mixed isomers) 15 ?30 For Hexane Isomers
including n-Hexane 500 ppm = OSHA PEL
500 ppm = ACGIH TLV
1,000 ppm = STEL
For n-Hexane
50 ppm = OSHA PEL
50 ppm = ACGIH TLV
74-98-6 Propane 15 ?30 1,000 ppm = OSHA PEL
Asphyxiant = ACGIH TLV
106-97-8 Butane 15 ?25 800 ppm = OSHA PEL
800 ppm = ACGIH TLV
Cyclo?C-124 Belt Dressing MSDS - Page 2 of 5
SECTION 3 ?HAZARDS IDENTIFICATION
Effects of Overexposure:
Ingestion: Not a likely route of exposure. If swallowed, call a physician immediately. DO NOT
induce vomiting.
Inhalation: Respiratory irritation, headache, nausea, fatigue, drowsiness, impaired coordination.
Skin Contact: Contact may dry the skin. Prolonged contact may cause moderate irritation. Not
easily absorbed. Solvent action can dry and defat the skin causing the skin to crack,
leading to dermatitis.
Eye Contact: Liquid or vapor can cause moderate to severe irritation.
Health Hazards (Acute and Chronic):
ACUTE: Eye irritant, possible skin irritant. CHRONIC: None known.
Carcinogenicity: NTP Carcinogen = No; IARC Monographs = No; OSHA Regulated = No
Medical Conditions Generally Aggravated by Exposure: None known.
SECTION 4 ?FIRST AID MEASURES
First Aid Procedures:
Ingestion: Call physician immediately. DO NOT INDUCE VOMITING.
Skin Contact: Wipe off with towel. Wash with soap and water. Get medical attention if irritation
persists.
Inhalation: Remove to fresh air. Administer oxygen if needed. Apply artificial respiration if
breathing has stopped. Get medical attention.
Eye Contact: Wash immediately with large volumes of fresh water for at least 15 minutes. Get
medical attention.
SECTION 5 ?FIRE FIGHTING MEASURES
Flash Point: -156癋 (-104.3癈) Method Used: Estimated
Flammable Limits in Air by Volume:
Lower Explosion Level (LEL) = 1.2 Upper Explosion Level (UEL) = 9.5
Extinguishing Media: Foam, CO2, dry chemical, water fog
Special Fire Fighting Procedures: Water spray may be ineffective. Water may be used to cool containers
to prevent pressure build-up and explosion when exposed to extreme heat. If water is used, fog
nozzles preferred. Wear goggles and self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Closed containers may explode from internal pressure build-up
when exposed to extreme heat and discharge contents. Vapor accumulation can flash or explode if
ignited. Overexposure to decomposition products may cause a health hazard. Symptoms may not
be readily apparent. Obtain medical attention.
HMIS Code: Health = 1 Flammability = 4 Reactivity = 0
Cyclo?C-124 Belt Dressing MSDS - Page 3 of 5
SECTION 6 ?ACCIDENTAL RELEASE MEASURES
Spill/Leak Procedures: Avoid breathing vapors. Ventilate area. Remove all sources of ignition. Clean
up area with absorbent material and place in closed containers for disposal.
SECTION 7 ?HANDLING AND STORAGE
Handling Procedures: Store and use in cool, dry, well-ventilated areas. Do not puncture or incinerate
(burn) cans. Do not stick pin, nail or any other sharp object into opening on top of can. Do not spray
in eyes. See product label for additional information. KEEP OUT OF THE REACH OF
CHILDREN.
Storage Procedures: Store and use in cool, dry, well-ventilated areas. Do not store above 120癋. Small
pressurized containers of flammable products may be stored in areas suitable for ordinary
combustibles with respect to construction, drainage, control of ignition sources and ventilation
except that they should not be stored in basements.
SECTION 8 ?EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory Protection: None under normal use. Avoid breathing vapors. In restricted areas, use
approved chemical/mechanical filters designed to remove a combination of particles and vapor. In
confined areas, use approved air line type respirator or hood. Self-contained breathing apparatus
is required for vapor concentrations above PEL/TLV limits.
Ventilation: Sufficient to prevent inhalation of solvent vapors. General dilution and/or local exhaust
ventilation in volume or pattern to keep PEL/TLV of most hazardous ingredient below acceptable
limit and LEL below stated limit.
Protective Gloves: None under normal use. Solvent resistant required for prolonged or repeated contact.
Eye Protection: None under normal use; however, safety glasses with splash guards or full face shield is
recommended.
Other Protective Equipment: None under normal use; however, solvent resistant apron or other clothing
is recommended.
Work/Hygienic Practices: Eye washes and safety showers in the workplace are recommended.
SECTION 9 ?PHYSICAL AND CHEMICAL PROPERTIES
Boiling Range: -44癋 - 208癋 (-42.2癈 - 98癈) Specific Gravity (H2O=1): 0.64
Vapor Pressure: mm Hg @ Temp Vapor Density (AIR=1): Heavier than air
Heptane 40 72
Hexane (mixed isomers) Solubility in Water: Nil
including n-Hexane 137 68
Propane 6350 68 pH: Not available
Butane 1640 68
Cyclo?C-124 Belt Dressing MSDS - Page 4 of 5
SECTION 9 ?PHYSICAL AND CHEMICAL PROPERTIES
Evaporation Rate (Butyl Acetate = 1): Slower than ether
Appearance and Odor: Aerosol product
SECTION 10 ?STABILITY AND REACTIVITY
Stability: Stable
Conditions to Avoid: Application to hot surfaces. Storage above 120癋. Exposure to open flame.
Incompatibility (materials to avoid): Strong oxidizing agents.
Hazardous Decomposition or Byproducts: May produce fumes when heated to decomposition. Fumes
may contain carbon monoxide.
Hazardous Polymerization: Will not occur.
SECTION 11 ?TOXICOLOGICAL INFORMATION
Long-term toxicological studies have not been conducted for this product. See Section 3 of this MSDS for
acute symptoms of overexposure and carcinogenicity information.
SECTION 12 ?ECOLOGICAL INFORMATION
Aquatic/Terrestrial No data is available at this time.
Toxicity
Environmental Fate
SECTION 13 ?DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of in accordance with local, state and federal regulations. Before
attempting clean up, refer to other sections of this MSDS for hazard caution information.
SECTION 14 ?TRANSPORT INFORMATION
U.S. DOT
Shipping Description: Aerosols, Consumer Commodity ORM-D
ID Number: Not Required
Hazard Class: Not Required
Packing Group: Not Required
Label: Not Required
Placards: Not Required
Cyclo?C-124 Belt Dressing MSDS - Page 5 of 5
SECTION 14 ?TRANSPORT INFORMATION
IMDG
Shipping Description: Aerosols, Limited Quantity
ID Number: 1950
Hazard Class: 2
Packing Group: Not Required
Label: Not Required
Markings: Not Required
Placards: Not Required
SECTION 15 ?REGULATORY INFORMATION
TSCA Inventory: All of the ingredients in this product are listed on the TSCA Inventory
SARA Extremely
Hazardous Substances None
SARA Section 313 This product contains the following toxic chemical subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40 CFR Part 372 (SARA 313 ?Toxic Chemical Release Reporting)
Chemical Name CAS# Weight %
Hexane (Mixed Isomers), including n-Hexane 110-54-3 15 - 30
CERCLA/Superfund (RQ):
Chemical Name Reportable Quantity
Hexane 5,000 lbs.
California Proposition 65: This product does not contain chemicals known to the State of California to
cause cancer, birth defects and other reproductive harm.
SECTION 16 ?OTHER INFORMATION
Volatile Organic Compound (VOC) (% by weight): 85%
Document Date: 3/31/03 Supersedes: 5/19/00
Revisions: Sections: 11, 12, 14 ?entire sections added
Cyclo Industries, LLC provides the information contained herein in good faith but makes no representation
as to its comprehensiveness or accuracy. Individuals receiving this information must exercise their
independent judgement in determining its appropriateness for a particular purpose. Cyclo Industries, LLC
makes no representations or warranties, either expressed or implied, of merchantability, fitness for a
particular purpose with respect to the information set forth herein or to the product to which the information
refers. Accordingly, Cyclo Industries, LLC will not be responsible for damages resulting from use of or
reliance upon this information.
|