Water Tight Technologies, LLC
P.O. Box 899, Payson, AZ 85547
SECTION 1 ?PRODUCT IDENTIFICATION
Product Name: Manufacturer's Name:
Coating Primer Water Tight Technologies, LLC
Item Number: Manufacturer's Address:
CPQT; CP1; CP5 P.O. Box 899, Payson, AZ 85547
NFPA Acute Hazard Rating:
24 Hour Emergency Telephone Number:
Health 2, Flammability 3, Reactivity 0
CHEMTREC ?United States 800-424-9300 ;
HMIS Acute Hazard Rating:
International 202-483-7616 (collect)
Health 2, Flammability 3, Reactivity 0
Chemical Name/Synonyms: Chemical Family:
N/A Mixture
SECTION 2 ?CHEMICAL COMPOSITION
Ingredient Components (chemical names) Common Case No. OSHA ACGIH
Names PEL-TWA TLV-TWA
%
Hazardous components 1% or greater
Carcinogens 0.1% or greater
Heptane 41.5 142-82-5 500 ppm 400 ppm
Toluene 41.5 108-88-3 200 ppm 20 ppm
SECTION 3 ?PHYSICAL & CHEMICAL CHARACTERISTICS
Physical State:
Appearance/Odor: Solubility in Water:
Liquid
Black liquid with characteristic odor Not miscible or difficult to mix
Boiling Point: Specific Gravity (H睴=1) Melting Point:
0.791 N/A
208?F-( 98?C)
Vapor Pressure: Additional Information: Freezing Point:
@ 20?C (68?F): 36 mm Hg VOC=5.51 lbs/gal or 66 - g/l Not Established
Volatiles: (% Wt or % Vol) Ignition Temperature: Reactivity in Water:
83.0% N/A
215?C (419?F)
pH (Full Strength) pH (Recommended Dilution):
N/A N/A
BRITE-n-EZTM Coating Primer ?Page 1 of 1
February 12, 2008
Water Tight Technologies, LLC
P.O. Box 899, Payson, AZ 85547
SECTION 4- FIRE & EXPLOSION HAZARD DATA
Flash Point: Flammable Limits (in air):
- 4?C, 25?F LEL: 1.1%; UEL: 7.0%
Extinguishing Media: Fire Fighting Procedures:
CO2, sand, extinguishing powder. Do not use water. For Use water spray to cool adjacent surfaces and fire
safety reasons water and water with full jet is unsuitable exposed containers. Protect against inhalation of
extinguishing agents. combustion products.
Firefighters should wear full protective clothing including
self-contained breathing apparatus to prevent inhalation
of smoke and decomposition products. Toxic fumes and
vapors may be involved.
Special Fire & Explosion Hazards:
Hazardous Decomposition Products:
Keep work areas free from open flames, sparks, hot metal
surfaces and other sources of ignition. Ground objects
Oxides of carbon, nitrogen and hydrocarbons and
prone to static electricity. Highly flammable, harmful by
hydrogen bromide (thermal degradation products)
inhalation and irritating to skin. Very toxic to aquatic
organisms. Water hazard class 2.
Method Used: Auto-Ignition Temperature:
NA This product is not self-igniting.
SECTION- 5 HEALTH HAZARD DATA
Signs and Symptoms of Exposure:
Permissible Exposure Limit:
Not Established
Dizziness, nausea or vomiting. Sensitive individuals may
Effects of Overexposure:
exhibit eye, nose, throat or dermal irritation with
Medical Conditions Aggravated By Exposure
prolonged exposure to processing fumes or vapors.
Toxic fumes may be released during fire. Exposure to
fumes may aggravate pre-existing eye, lung, and skin
conditions.
Acute: Chemical Listed as a Carcinogen (or Potential Carcinogen):
Irritation to eyes, lungs, and mucous membranes
National Toxicology Program: None
Chronic:
I.A.R.C. Monographs: Toluene (108-88-3)
Excess exposure can cause headache, nausea, narcosis, and OSHA: None
liver and kidney damage.
Symptoms of poisoning may even occur after several hours, therefore medical observation
Emergency & First Aid Procedures:
for at least 48 hours after the accident should occur.
Eye Contact:
Flush with water and call physician
Skin Contact:
Immediately wash with soap and water and rinse thoroughly. Remove and wash contaminated clothing.
Inhalation:
With overexposure remove to fresh air. Administer oxygen or artificial respiration, if necessary. Call physician.
Ingestion:
Seek medical treatment.
Primary Route of Entry:
Inhalation.
BRITE-n-EZTM Coating Primer ?Page 2 of 2
February 12, 2008
Water Tight Technologies, LLC
P.O. Box 899, Payson, AZ 85547
SECTION 6 ?REACTIVITY DATA
Stability: Incompatibility:
Stable at ambient temperatures and pressures. Product is Strong oxidizers, acids and bases.
not explosive. However, formation of explosive air/vapor
mixtures are possible.
Hazardous Decomposition Products: Hazardous Polymerization:
Toxic gases or vapors, such as oxides of carbon, nitrogen
N/A
and hydrocarbons along hydrogen bromide may be
released if thermal degradation of product occurs.
Conditions to Avoid:
Open flames and sparks. Closed areas that restrict adequate ventilation. Toxic to fish. Do not contaminate ground
water, water course, or sewage systems. Toxic to aquatic life.
SECTION 7 - SPILL OR LEAK PROCEDURES
Steps to be taken in case material is released or spilled:
Small spill:
Absorb with liquid binding materials. Use non-sparking tools. Transfer into secure containers for proper disposal.
Use personal protective equipment as outlined below. Inform respective authorities in case of seepage into water
course or sewage system. Must not be disposed of together with household garbage. Do not allow product to reach
sewage system.
Large Spill:
Same as small spill.
Waste Disposal Method:
Dispose of as a hazardous waste in accordance with federal, state and local laws and regulations.
SECTION 8 ?SPECIAL PROTECTION
Respiratory Protection: Eye Protection:
Use NIOSH-Certified respiratory protection for organic Safety glasses with side shields
vapor in absence of adequate ventilation.
Protective Gloves: Other Protective Equipment:
Impervious gloves are recommended to prevent skin Protective work clothing.
contact.
Ventilation:
Provide adequate ventilation to maintain airborne concentrations below OSHA PELs.
BRITE-n-EZTM Coating Primer ?Page 3 of 3
February 12, 2008
Water Tight Technologies, LLC
P.O. Box 899, Payson, AZ 85547
SECTION 9 ?SPECIAL PRECAUTIONS OR OTHER COMMENTS
Storage/Handling:
Store in cool, dry, well ventilated facility. Store and use away from all sources of direct heat and ignition. Protect
against electrostatic charge. Keep containers closed when not in use.
Other Precautions:
Provide adequate ventilation and avoid prolonged or repeated contact with the skin. Wash with soap and water after
contact.
Work/Hygienic Practices:
Maintain good personal hygiene practices. Wash contaminated clothing before reuse. Do not eat, drink, or smoke in
work areas. Wash exposed skin before eating, drinking, smoking, or applying cosmetics.
SECTION 10 - TRANSPORTATION
Regulatory Agency: Identification Number:
U.S.A., DOT, IMO UN 1133
Labels Required:
Proper Shipping Name:
Adhesives, flammable Flammable Liquid
Hazard Classification: Other Requirements:
3 49 CFR 172.101 Adhesives, UN1133, IMDG Class 3.2,
Pg. 3174, Flash Point -4?C
Packing Group:
11
SECTION 11 ?MISCELLANEOUS INFORMATION
Additional Comments:
This product contains chemicals (toluene ?CAS# 108-88-3) known to the state of California to cause birth defects or
other reproductive harm
Date of Previous MSDS:
Changes Since Previous MSDS:
Telephone Number for Additional Information:
(888) 269-2122
DISCLAIMER
The information contained herein is based on data considered accurate which has been obtained from other
companies and organizations. However, no warranty or representation is expressed or implied that the information
is accurate, complete, or representative. Water Tight Technologies, LLC assumes no responsibility for injury to the
buyer, the buyer's employees, or any third persons if reasonable safety procedures are not followed.
BRITE-n-EZTM Coating Primer ?Page 4 of 4
February 12, 2008
|