Page 1 of 6
MATERIAL SAFETY DATA SHEET
Date Issued: 04/17/2009
MSDS No: 1573-QT/G
Eco-Oven
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Eco-Oven
PRODUCT DESCRIPTION: SMT Oven Cleaner
PRODUCT CODE: 1573-QT/G
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
CHEMTREC (US Transportation) :(800) 424 - 9300
Techspray, L.P.
CANUTEC (Canadian Transportation) :(613) 996 - 6666
1001 N.W. 1st Street
Emergency Phone :(800) 858 - 4043
P.O. Box 949
Amarillo TX 79107
Emergency Contact: Chemtrec
Product Stewardship: 1-800-858-4043
Service Number: 1-800-858-4043
2. HAZARDS IDENTIFICATION
HAZARD DESIGNATION
"Xi" - Irritant
R36/37/38 - Irritating to eyes, respiratory system and skin.
"Xn" - Harmful
R22 - Harmful if swallowed.
EMERGENCY OVERVIEW
IMMEDIATE CONCERNS: Harmful if swallowed. Aspiration hazard.
POTENTIAL HEALTH EFFECTS
EYES: Causes eye irritation.
SKIN: May cause skin irritation.
SKIN ABSORPTION: Skin absorption can occur.
INGESTION: Harmful if swallowed.
INHALATION: Prolonged or excessive inhalation may cause respiratory tract irritation.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
EYES: Liquid splashed in the eye may cause redness, irritation and conjunctivitis.
SKIN: Prolonged or exposure may cause skin irritation.
SKIN ABSORPTION: Glycol ingredients can be absorbed into skin.
INGESTION: For large amounts; abdominal pain, nausea and vomiting.
INHALATION: Inhalation may cause respiratory tract irritation.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Page 2 of 6
MATERIAL SAFETY DATA SHEET
Date Issued: 04/17/2009
MSDS No: 1573-QT/G
Eco-Oven
Chemical Name Wt.% CAS EINECS
Water 80 - 90 7732-18-5 231-791-2
Ethanol, 2-amino- 1-5 141-43-5 205-483-3
Polypropylene glycol 1 - 10 25322-69-4
Diazolidinyl Urea <1 78491-02-8
4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical
attention.
SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical
attention if symptoms occur. Wash clothing before reuse.
INGESTION: Aspiration hazard. If swallowed, vomiting may occur spontaneously, but do not induce. If
vomiting occurs, keep head below hips to prevent aspiration into lungs. Call a physician immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical attention.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: None : . . . . ASTM D-56 (Tag C.C.)
HAZARDOUS COMBUSTION PRODUCTS: Combustion generates smoke and fumes of oxides of
carbon/nitrogen.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-
demand, (MSHA/NIOSH approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Avoid runoff into storm sewers and ditches which lead to waterways.
GENERAL PROCEDURES: Dike area to contain spill. Take precautions as necessary to prevent
contamination of ground and surface waters. Recover spilled material on adsorbent, such as sawdust or
vermiculite, and sweep into closed containers for disposal. After all visible traces, including vapors, have
been removed thoroughly wet vacuum the area. Do not flush to sewer. If area of spill is porous, remove
as much contaminated earth, gravel, etc. as necessary and place in closed containers for disposal.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Wash thoroughly after handling. Use only in a well ventilated area. Follow all
MSDS/label precautions even after container is emptied because they may retain product residues. Store
in a cool dry place.
HANDLING: Use with adequate ventilation.
Page 3 of 6
MATERIAL SAFETY DATA SHEET
Date Issued: 04/17/2009
MSDS No: 1573-QT/G
Eco-Oven
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV SupplierOEL
mg/m3 mg/m 3 mg/m3
Chemical Name ppm ppm ppm
6 7.5 NL
3 ppm 3 ppm NL ppm
TWA
mg/m3 mg/m3 mg/m3
Ethanol, 2-amino-
15 15 NL
6 ppm 6 ppm NL ppm
STEL
mg/m3 mg/m3 mg/m3
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering
controls to control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of
liquid contact, wear splash-proof goggles.
SKIN: Gloves of the following materials may provide protection against permeation:
Viton, solvex, Buna, Butyl, and Neoprene.
RESPIRATORY: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2
requirements must be followed whenever workplace conditions warrant a respirator's use.
WORK HYGIENIC PRACTICES: Avoid contact with eyes. Avoid fume inhalation. Limit skin contact.
OTHER USE PRECAUTIONS: Emergency shower and eyewash facility should be in close proximity.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
ODOR: Low odor.
APPEARANCE: Clear, mobile liquid.
pH: 10 to 11
PERCENT VOLATILE: 90.25 at 104癈
VAPOR PRESSURE: < 0.02 mmHg@20C (VOC Composite Vapor Pressure)
BOILING POINT: ~ 100癈 (212癋)
FLASHPOINT AND METHOD: None : . . . . ASTM D-56 (Tag C.C.)
SOLUBILITY IN WATER: Fully miscible
DENSITY: 1.00 at 25癈 (77癋)
(VOC): 2.170 % by weight
Notes: 21.8 g/l
Page 4 of 6
MATERIAL SAFETY DATA SHEET
Date Issued: 04/17/2009
MSDS No: 1573-QT/G
Eco-Oven
10. STABILITY AND REACTIVITY
STABILITY: Stable.
POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Heat, flames, ignition sources, and incompatables.
HAZARDOUS DECOMPOSITION PRODUCTS: Hazardous decomposition products include oxides of
carbon and nitrogen.
INCOMPATIBLE MATERIALS: Strong acids and alkalis, reactive metals and strong oxidizing agents.
11. TOXICOLOGICAL INFORMATION
ACUTE
EYES: Moderately to severely irritating
DERMAL LD50: Mildly to moderately irritating.
SKIN ABSORPTION: Glycol ingredients may be absorbed through skin.
INHALATION LC50: Not Established
EYE EFFECTS: Mixture is a moderate eye irritant.
SKIN EFFECTS: Causes irritation to skin.
CARCINOGENICITY
IARC: NOT listed
NTP: NOT listed
OSHA: NOT listed
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: There is limited information available on the environmental fate and effects of
this material. The primary environmental concern for release is the impact on aquatic and terrestrial
species. Due care should be taken to avoid the accidental release of this material into the environment.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Federal, State, and Local laws governing disposal of materials can differ. Ensure
compliance with proper authorities before disposal.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME: Not regulated
UN/NA NUMBER: NA
Page 5 of 6
MATERIAL SAFETY DATA SHEET
Date Issued: 04/17/2009
MSDS No: 1573-QT/G
Eco-Oven
PACKING GROUP: NA
ROAD AND RAIL (ADR/RID)
PROPER SHIPPING NAME: Not regulated
AIR (ICAO/IATA)
SHIPPING NAME: Not regulated
VESSEL (IMO/IMDG)
SHIPPING NAME: Not regulated
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
311/312 HAZARD CATEGORIES: IMMEDIATE / DELAYED
FIRE: No PRESSURE GENERATING: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
313 REPORTABLE INGREDIENTS: None
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT)
CERCLA REGULATORY: None
TSCA (TOXIC SUBSTANCE CONTROL ACT)
Chemical Name CAS
Water 7732-18-5
Ethanol, 2-amino- 141-43-5
Polypropylene glycol 25322-69-4
CLEAN AIR ACT
40 CFR PART 68---RISK MANAGEMENT FOR CHEMICAL ACCIDENT RELEASE
PREVENTION: NOT listed
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)
29 CFR1910.119---PROCESS SAFETY MANAGEMENT OF HIGHLY HAZARDOUS
CHEMICALS: None of the chemicals in this product are considered highly hazardous by OSHA.
CALIFORNIA PROPOSITION 65: This product contains no listed substances known to the State of
California to cause cancer, birth defects or other reproductive harm, at levels which would require a
warning under the statute.
CANADA
WHMIS CLASS: Class D2B - Toxic Materials
EUROPEAN COMMUNITY
Page 6 of 6
MATERIAL SAFETY DATA SHEET
Date Issued: 04/17/2009
MSDS No: 1573-QT/G
Eco-Oven
EEC LABEL SYMBOL AND CLASSIFICATION
"Xi" - Irritant
R36/37/38 - Irritating to eyes, respiratory system and skin.
"Xn" - Harmful
R22 - Harmful if swallowed.
16. OTHER INFORMATION
APPROVED BY: Pierce A. Pillon TITLE: Chemist
REVISION SUMMARY: New MSDS
NFPA CODES
1
1 0
MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is
accurate. However, neither Tech Spray, LLC,or any of its subsidiaries assumes any liability whatsoever
for the accuracy or completeness of the information contained herein. Final determination of suitability of
any material is the sole responsibility of the user. All materials may present unknown hazards and
should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
|