MATERIAL SAFETY DATA SHEET
MOLECULETM SPOT CLEANERTM
For Technical Fabrics
Revision Date: 1/08/07
Section I - Product Identification
Product name: MoleculeTM Spot CleanerTM For Technical Fabrics
Produced by:
Molecule Labs, Inc. 5458 Gateway Plaza Dr. Benicia, CA 94510
707-746-1062
Section II - Components
If present, IARC, NTP and OSHA carcinogens and chemical subject to the reporting requirements of SARA
title III Section 313 are identified in this Section.
Ingredient CAS# % (BY VOL) OSHA PEL ACGIH TLV
Ethoxylated Alcohol/ Proprietary 11 n/a n/a
Quaternary Amine
Dipropylene Glycol 29911-28-2 5 n/a n/a
n-butyl Ether
Monoethanolamine 141-43-5 5 n/a 3 ppm
Nonionic Surfactant 68131-39-5 <2% n/a n/a
Tetrasodium EDTA 64-02-8 <2% Not Regulated Not Established
Citric Acid 77-92-9 1 n/a Not Established
Proprietary Fragrance n/a <1% n/a n/a
Deionized Water 7732-18-5 n/a Not Established
Section III - Hazard Identification
Chronic Effects of
Overexposure:
Inhalation: May irritate Eye Contact: May cause Skin Contact: N/D Ingestion: May irritate
nasal passages. severe eye irritation. throat and mouth.
Acute Effects of Overexposure:
Inhalation: Excessive exposure may cause respiratory Eye Contact: May cause severe eye irritation.
irritation.
Skin Contact: May cause skin irritation. Ingestion: May be harmful if swallowed.
Section IV - First Aid Procedures
If Swallowed: Do not induce vomiting. If patient is fully conscious, give water to dilute
substance. Call a physician or local poison control center immediately. Do not
give anything by mouth to an unconscious person. Loosen any tight clothing.
Skin Contact: Flush thoroughly with water for 15 minutes. Get medical attention if irritation
persists.
If Inhaled: Move to fresh air. Get medical attention if irritation persists.
Eyes: Flush thoroughly with water for 15 minutes. Get medical attention if irritation
persists.
Section V - Fire Fighting Measures
Flash Point: No flash point until 200癋
Extinguishing Agents: Use water, carbon dioxide, dry powder extinguisher, carbon dioxide, halon or other
media appropriate for materials actually involved in fire.
Auto-ignition Temp: None up to 100?C
Hazardous
Decomposition Products: Exposure to fire may liberate carbon dioxide, carbon monoxide, halogenated
compounds and hydrogen chloride.
Explosion Data: Sensitivity to Impact/Static discharge - None
Section VI - Accidental Release Measures
Procedure for Cleanup: Prevent further spill of material. Dilute with water and soak up with an absorbent
such as clay, sand or other suitable material and dispose of properly. Flush area
with water to remove residue. Prevent from entering soils, waterways or
groundwater.
Section VII - Precautions For Safe Handling
Handling and Storage Store in a cool, well ventilated place away from incompatible materials and wash
Precautions: hands thoroughly after handling.
Special Shipping Non Hazardous
Information:
Section VIII - Control And Protective Measures
Ventilation: Provide sufficient ventilation. A respirator is not required unless workplace
exposure limits of the product are exceeded.
Protective Gloves: Avoid skin contact. Wear NBR or rubber gloves for extended or repeated skin
contact.
Eye Protection: Avoid eye contact. Wear safety glasses while handling concentrate.
Footwear and Clothing: Standard work shoes and clothing.
Other: Do not ingest product. No other special protective measures required.
Section IX - Physical/Chemical Characteristics
Form/Color: Liquid/Light Boiling point: 100?C
Amber
Specific Gravity 1.00 Vapor Pressure: No Data
(Water = 1):
Evaporation rate No Data pH: 9.0 ?10.0
(Water = 1):
Odor: Mild
Section X - Reactivity Hazard Data
Stability: Yes Incompatibility: Avoid strong Reactivity, and Under What Conditions:
oxidizing materials, acids or alkalis. None known
Section XI - Toxicological Information
Teratogenicity: No Data Short Term Exposure limits:
No Data
Irritancy of Product: May cause skin, eye, mouth and throat irritation. Sensitization to Product:
None known.
Reproductive Toxicity: No Data Carcinogenicity: No Data
Mutagenicity: No Data
We believe said statements, technical information and recommendations contained herein are reliable.
Statements contained herein are given without warranty or guarantee of any kind, express or implied,
and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of
their use.