Sikadur?42 Grout-Pak Part C
Distributed By:
HMIS
HEALTH *2
FLAMMABILITY 0 Cleveland 1-800-362-9267
Canton 1-877-258-7601
REACTIVITY 0
Toledo 1-800-860-3352
www.chasephipps.com
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 05/19/2005
Product Name: Sikadur?42 Grout-Pak Part C
CAS Number: Not Established
MSDS Number: 3614
Product Code: 0335-19N
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
POLYVINYL CHLORIDE 9002-86-2
SILICA, QUARTZ 14808-60-7
TITANIUM DIOXIDE 13463-67-7
3. Hazards Identification
Eye Hazards
EYE IRRITANT.
Skin Hazards
MAY CAUSE SKIN IRRITATION.
Ingestion Hazards
NOT NORMALLY INGESTED.
Inhalation Hazards
May cause respiratory tract irritation. Breathing dust may cause nose, throat or lung irritation. Respirable
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikadur?42 Grout-Pak Part C
3. Hazards Identification - Continued
Inhalation Hazards - Continued
crystalline silica can cause silicosis, a fibrosis (scarring) of the lungs. Silicosis may be progressive.
4. First Aid Measures
Eye
RINSE EYES THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN.
Skin
WASH SKIN THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.IF
SYMPTOMS PERSIST CONSULT PHYSICIAN.
Ingestion
DO NOT INDUCE VOMITING. Get medical attention immediately.
Inhalation
REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, INSTITUTE ARTIFICIAL RESPIRATION. CONSULT
WITH PHYSICIAN.
5. Fire Fighting Measures
Flash Point: >220 癋
Autoignition Point: N/AV 癋
Flammability Class: NCMB
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
NONE KNOWN
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
WEAR SUITABLE PROTECTIVE EQUIPMENT. CONTAIN SPILL, SCOOP UP AND TRANSFER INTO SUITABLE
CONTAINERS. AVOID CONTACT.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Not for internal consumption. STORE IN A COOL DRY AREA. KEEP
CONTAINERS TIGHTLY CLOSED.
Storage Precautions
Keep container upright.
Work/Hygienic Practices
Use good personal hygiene.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikadur?42 Grout-Pak Part C
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
AVOID SKIN CONTACT. WEAR LONG SLEEVE SHIRT AND LONG PANTS. CHEMICAL RESISTANT GLOVES.
Respiratory Protection
In areas where the P.E.L.s are exceeded, use a properly fitted NIOSH-approved respirator.
Other/General Protection
9. Physical And Chemical Properties
Appearance
SAND/MORTAR
Odor
ODORLESS
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/A 癋
Boiling Point: N/A 癋
Specific Gravity: N/AV
Packing Density: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Solubility: N/A
Evaporation Rate: N/A
10. Stability And Reactivity
Stability: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Conditions To Avoid (Stability)
NONE KNOWN
Incompatible Materials
NONE KNOWN
Hazardous Decomposition Products
NONE KNOWN
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikadur?42 Grout-Pak Part C
10. Stability And Reactivity - Continued
Conditions To Avoid (Polymerization)
NONE KNOWN
11. Toxicological Information
Miscellaneous Toxicological Information
Conditions Aggravated By Exposure
CHRONIC RESPIRATORY DISORDERS
Ingredient(s) - Carginogenicity
POLYVINYL CHLORIDE
Listed In The IARC Monographs
SILICA, QUARTZ
NTP - Listed On The National Toxicology Program
Listed In The IARC Monographs
12. Ecological Information
Other Environmental Information
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
NOT REGULATED UNDER D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
State Regulations
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
Ingredient(s) - State Regulations
POLYVINYL CHLORIDE
New Jersey - Environmental Hazard
SILICA, QUARTZ
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikadur?42 Grout-Pak Part C
15. Regulatory Information - Continued
Ingredient(s) - State Regulations - Continued
California - Proposition 65
Massachusetts - Hazardous Substance
TITANIUM DIOXIDE
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
New York City - Hazardous Substance
16. Other Information
HMIS Rating
Health: *2
F i re : 0
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 03/21/2001
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS GeneratorTM 2000
Distributed By:
Cleveland 1-800-362-9267
Canton 1-877-258-7601
Toledo 1-800-860-3352
www.chasephipps.com