Material Safety Data Sheet
1. Chemical product and company identification
Product name WE3-125C
MSDS # 01114-AE
Code 01114-AE
Product use Lubricant
Manufacturer Castrol Industrial North America, Inc.
150 W. Warrenville Road
Naperville, IL 60563
Supplier Castrol Industrial North America, Inc.
150 W. Warrenville Road
Naperville, IL 60563
Product Information: 1-800-621-2661
EMERGENCY SPILL 1 (800) 424-9300 CHEMTREC (USA)
INFORMATION:
2. Composition/information on ingredients
Ingredient name CAS # % by weight
Distillates (petroleum), hydrotreated heavy naphthenic (Highly refined mineral 64742-52-5 55 - 60
oil)
Dialkylamine fatty acid salt proprietary 5 - 10
Dialkylamine diacid salt proprietary 1-5
Highly refined mineral oil (proprietary) proprietary 1-5
triethanolamine 102-71-6 1-5
Dialkylamine, fatty acid sarcosine salt proprietary 1-5
AMP/sarkosyl O proprietary 1-5
2-Amino-2-methylpropanol 124-68-5 1-5
3-Iodo-2-propynyl butylcarbamate 55406-53-6 0.1 - 1
3. Hazards identification
Physical state Liquid.
Color Clear. Amber.
Emergency overview WARNING!
CAUSES EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
Do not ingest. Do not get in eyes, on skin or clothing. In accordance with good industrial hygiene
and safety work practices, airborne exposures should be controlled to the lowest extent
practicable. Keep container closed. Use only with adequate ventilation. Wash thoroughly after
handling.
Routes of entry Dermal contact. Eye contact. Inhalation. Ingestion.
Potential health effects
Eyes Causes eye irritation.
Skin Causes skin irritation.
Inhalation May cause respiratory tract irritation.
Product WE3-125C MSDS # Page: 1/6
01114-AE
name
Version 1 Date of issue 06/08/2005. Format US Language ENGLISH.
( ENGLISH )
Build 4.2.3
Ingestion Ingestion may cause gastrointestinal irritation and diarrhea.
Medical conditions None identified.
aggravated by over-
exposure
See toxicological information (section 11)
4. First aid measures
Eye contact In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical
attention if irritation develops.
Skin contact Immediately wash exposed skin with soap and water. Remove contaminated clothing and shoes.
Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if
irritation develops.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical attention if irritation develops.
Ingestion Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical attention if symptoms appear.
5. Fire-fighting measures
Flammability of the product Non-flammable.
Products of combustion These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2 etc.), sulfur oxides (SO2,
SO3 etc.). Some metallic oxides.
Unusual fire/explosion This material is not explosive as defined by established regulatory criteria.
hazards
Fire-fighting media and In case of fire, use water fog, foam, dry chemicals, or carbon dioxide.
instructions
Protective clothing (fire) Fire-fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full
turnout gear.
6. Accidental release measures
Personal precautions Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable
protective equipment (See Section: "Exposure controls/personal protection"). Follow all fire
fighting procedures (See Section: "Fire-fighting measures").
Environmental If emergency personnel are unavailable, contain spilled material. For small spills add absorbent
(soil may be used in the absence of other suitable materials) scoop up material and place in a
precautions and clean-up
sealed, liquid-proof container for disposal. For large spills dike spilled material or otherwise
methods
contain material to ensure runoff does not reach a waterway. Place spilled material in an
appropriate container for disposal. Avoid contact of spilled material with soil and prevent runoff
entering surface waterways. See Section 13 for Waste Disposal Information.
Personal protection in Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient;
consult a specialist BEFORE handling this product.
case of a large spill
7. Handling and storage
Handling Do not ingest. Do not get in eyes, on skin or on clothing. Avoid contact with skin and clothing. In
accordance with good industrial hygiene and safety work practices, airborne exposures should be
controlled to the lowest extent practicable. Use only with adequate ventilation. Wash thoroughly
after handling.
DO NOT ADD NITRITES TO THIS FLUID.
Storage Keep container tightly closed. Keep container in a cool, well-ventilated area. Empty containers
may contain harmful, flammable/combustible or explosive residue or vapors. Do not cut, grind, drill,
weld, reuse or dispose of containers unless adequate precautions are taken against these
hazards.
Product WE3-125C MSDS # Page: 2/6
01114-AE
name
Version 1 Date of issue 06/08/2005. Format US Language ENGLISH.
( ENGLISH )
Build 4.2.3
8. Exposure controls/personal protection
Occupational exposure
limits
Ingredient name Occupational exposure limits
ACGIH (United States).
Distillates (petroleum), hydrotreated heavy
STEL: 10 mg/m3 15 minute(s). Form: Oil mist, mineral
naphthenic (Highly refined mineral oil)
TWA: 5 mg/m3 8 hour(s). Form: Oil mist, mineral
OSHA (United States).
TWA: 5 mg/m3 8 hour(s). Form: Oil mist, mineral
Dialkylamine fatty acid salt None assigned.
Dialkylamine diacid salt None assigned.
ACGIH (United States).
Highly refined mineral oil (proprietary)
STEL: 10 mg/m3 15 minute(s). Form: Oil mist, mineral
TWA: 5 mg/m3 8 hour(s). Form: Oil mist, mineral
OSHA (United States).
TWA: 5 mg/m3 8 hour(s). Form: Oil mist, mineral
ACGIH TLV (United States, 1/2004).
triethanolamine
TWA: 5 mg/m3 8 hour(s).
Dialkylamine, fatty acid sarcosine salt None assigned.
AMP/sarkosyl O None assigned.
2-Amino-2-methylpropanol None assigned.
3-Iodo-2-propynyl butylcarbamate None assigned.
No special ventilation requirements. Good general ventilation should be sufficient to control
Control Measures
airborne levels. If this product contains ingredients with exposure limits, use process enclosures,
local exhaust ventilation, or other engineering controls to keep worker exposure below any
recommended or statutory limits.
Hygiene measures Wash hands, forearms and face thoroughly after handling chemical products, before eating,
smoking and using the lavatory and at the end of the working period. Appropriate techniques
should be used to remove potentially contaminated clothing. Wash contaminated clothing before
reusing. Ensure that eyewash stations and safety showers are close to the work-station location.
Personal protection
Eyes Avoid contact with eyes. Safety glasses with side shields.
Skin and body Avoid contact with skin and clothing. Wear suitable protective clothing.
Respiratory Use only with adequate ventilation. In accordance with good industrial hygiene and safety work
practices, airborne exposures should be controlled to the lowest extent practicable.
Hands Wear suitable gloves.
Not available.
Consult local authorities for acceptable exposure limits.
9. Physical and chemical properties
Physical state Liquid.
pH 9.4 to 10.4 at 5%
Odor Mild.
Color Clear. Amber.
Specific gravity 0.92 to 0.945
930 kg/m3 (0.93 g/cm3) at 15.6癈
Density
Solubility Easily soluble in cold water, hot water.
Product WE3-125C MSDS # Page: 3/6
01114-AE
name
Version 1 Date of issue 06/08/2005. Format US Language ENGLISH.
( ENGLISH )
Build 4.2.3
Dispersibility properties See solubility in water.
10. Stability and reactivity
Stability and reactivity The product is stable.
Conditions to avoid Not available.
Incompatibility with various Reactive or incompatible with the following materials: oxidizing materials.
substances
Hazardous decomposition Not available.
products
Hazardous polymerization Will not occur.
11. Toxicological information
Chronic toxicity
No component of this product at levels greater than 0.1% is identified as a carcinogen by ACGIH
Carcinogenic
or the International Agency for Research on Cancer (IARC). No component of this product
effects
present at levels greater than 0.1% is identified as a carcinogen by the U.S. National Toxicology
Program (NTP) or the U.S. Occupational Safety and Health Act (OSHA).
No component of this product at levels greater than 0.1% is classified by established regulatory
Mutagenic
criteria as a mutagen.
effects
No component of this product at levels greater than 0.1% is classified by established regulatory
Reproductive
criteria as a reproductive toxin.
effects
No component of this product at levels greater than 0.1% is classified by established regulatory
Teratogenic
criteria as a reproductive toxin.
effects
Alkanolamine: This product contains an alkanolamine. In all metalworking fluids containing
Other chronic toxicity
amines, there is a potential for forming nitrosamines which are animal carcinogens. Therefore, no
data
nitrites or related nitrosating agents should be added to such compositions.
12. Ecological information
Ecotoxicity No testing has been performed by the manufacturer.
13. Disposal considerations
Waste information Avoid contact of spilled material and runoff with soil and surface waterways. Consult an
environmental professional to determine if local, regional or national regulations would classify
spilled or contaminated materials as hazardous waste. Use only approved transporters, recyclers,
treatment, storage or disposal facilities.
Consult your local or regional authorities.
14. Transport information
Not classified as hazardous for transport (DOT, TDG, IMO/IMDG, IATA/ICAO)
Product WE3-125C MSDS # Page: 4/6
01114-AE
name
Version 1 Date of issue 06/08/2005. Format US Language ENGLISH.
( ENGLISH )
Build 4.2.3
15. Regulatory information
U.S. Federal regulations US INVENTORY (TSCA): In compliance.
This product is not regulated under Section 302 of SARA and 40 CFR Part 355.
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: WE3-125C:
Immediate (Acute) Health Hazard
SARA 313
Form R - Reporting This product does not contain any hazardous ingredients at or above regulated thresholds.
requirements
Supplier notification This product does not contain any hazardous ingredients at or above regulated thresholds.
CERCLA Sections 102a/103 Hazardous Substances (40 CFR Part 302.4):: Propylene oxide: 100
lbs. (45.36 kg); 1,4-dioxane: 100 lbs. (45.36 kg); Ethylene oxide: 10 lbs. (4.536 kg);
Diethanolamine; 2,2'-Iminodiethanol: 100 lbs. (45.36 kg);
State regulations Florida:triethanolamine
Massachusetts RTK:Highly refined mineral oil (proprietary); triethanolamine; 2-Amino-
2-methylpropanol
Minnesota:triethanolamine
Pennsylvania RTK:triethanolamine (generic environmental hazard); 2-Amino-2-methylpropanol
(generic environmental hazard)
WARNING: This product contains a chemical known to the State of California to cause cancer.
Propylene oxide; 1,4-dioxane
WARNING: This product contains a chemical known to the State of California to cause cancer and
birth defects or other reproductive harm.
Ethylene oxide
Inventories AUSTRALIAN INVENTORY (AICS): Not determined.
CANADA INVENTORY (DSL): In compliance.
CHINA INVENTORY (IECS): Not determined.
EC INVENTORY (EINECS/ELINCS): Not determined.
JAPAN INVENTORY (ENCS): Not determined.
KOREA INVENTORY (ECL): Not determined.
PHILIPPINE INVENTORY (PICCS): Not determined.
16. Other information
Label requirements WARNING!
CAUSES EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
Health 2 -
HMIS?Rating : National Fire
1 Fire hazard
Flammability 1 Protection
2 0
Health Instability
Physical 0 Association Specific hazard
Hazard (U.S.A.)
Personal B
protection
History
Date of issue 06/08/2005.
Date of previous issue No Previous Validation.
Product WE3-125C MSDS # Page: 5/6
01114-AE
name
Version 1 Date of issue 06/08/2005. Format US Language ENGLISH.
( ENGLISH )
Build 4.2.3
Prepared by Product Stewardship
Notice to reader
All reasonably practicable steps have been taken to ensure this data sheet and the health, safety and environmental information
contained in it is accurate as of the date specified below. No warranty or representation, express or implied is made as to the
accuracy or completeness of the data and information in this data sheet.
The data and advice given apply when the product is sold for the stated application or applications. You should not use the
product other than for the stated application or applications without seeking advice from us.
Iiteu e'o lai t e a aea du eti po u t ae a dt c mp wt a a pc b l sa drg l i s T eB
ts h s r bg t n o v l t n s h rd c s fl n o o l i l p la l a
s io u s y y h l i e w n e u tn . h P ao
Group shall not be responsible for any damage or injury resulting from use, other than the stated product use of the material, from
any failure to adhere to recommendations, or from any hazards inherent in the nature of the material. Purchasers of the product
for supply to a third party for use at work, have a duty to take all necessary steps to ensure that any person handling or using the
product is provided with the information in this sheet. Employers have a duty to tell employees and others who may be affected of
any hazards described in this sheet and of any precautions that should be taken.
Product WE3-125C MSDS # Page: 6/6
01114-AE
name
Version 1 Date of issue 06/08/2005. Format US Language ENGLISH.
( ENGLISH )
Build 4.2.3
|