Material Safety Data Sheet
Page: 1 of 4
Issue Date : January 2007 RE-ISSUED by HAYMES
Infosafe No. 1HAS8
Product Name : LOW SHEEN ACRYLIC - WHITE , EXTRA DARK & BASES
Hazard Classification not determined by manufacturer at date of issue
COMPANY DETAILS
Company Name HAYMES PAINT
Address P.O Box 167 WENDOUREE
VICTORIA 3355 Australia
Tel/Fax Tel: 03 5342 6200
IDENTIFICATION
Product Code LSAWTB
Product Name LOW SHEEN ACRYLIC - WHITE , EXTRA DARK & BASES
Proper Shipping None Allocated
Name
UN Number None Allocated
DG Class None Allocated
Packing Group None Allocated
Hazchem Code None Allocated
Poisons Schedule Not Scheduled
Product Use As a high quality water based low sheen acrylic paint for interior and sheltered
exterior surfaces.
Physical Data
Appearance White viscous liquid.
Melting Point Not Available
Vapour Pressure As for water.
Boiling Point Initial boiling point 100癈
Flash Point Not applicable; water based paint.
Flamm. Limit LEL Not applicable
Explosion Data Not applicable
Density Approx: 1.4
Other Properties
Volatile Component Approximately 46%
Autoignition Temp. Not applicable
Vapour Density Approx. 1
pH Value 8 - 10
Form Liquid
Decomposition Not available
Temperature
Formula N/A.
Molecular Weight Not applicable
Other Information Emulsifiable mixture.
Ingredients
Ingredients Name CAS Proportion
Polyacrylate emulsion PROPRIETAR 30-40 %
Y
C.I. Pigment White 6 13463-67-6 20-30 %
Extenders, defoamer, coalescent, 20-30 %
biocide, dispersants, humectant,
surfactants and thickeners
Water 7732-18-5 15-25 %
Material Safety Data Sheet
Page: 2 of 4
Issue Date : January 2007 RE-ISSUED by HAYMES
Infosafe No. 1HAS8
Product Name : LOW SHEEN ACRYLIC - WHITE , EXTRA DARK & BASES
Hazard Classification not determined by manufacturer at date of issue
Styrene acrylate copolymer PROPRIETAR 1-10 %
dispersion Y
Amino-methyl propanol 124-68-5 0-1 %
Other Information Water based paint consisting of a polyacrylate dispersion plus stabilisers,
pigments, extenders, dispersants, defoamers and bactericides.
HEALTH HAZARD INFORMATION
Health Effects
Acute - Swallowed No adverse effects expected due to swallowing of small amounts incidental to
industrial handling. However it is good work practice to avoid ingestion of
product.
Acute - Eye May cause slight eye irritation.
Acute - Skin Contact with skin will result in mild irritation. Repeated or prolonged skin
contact may lead to irritation.
Acute - Inhaled No adverse effects anticipated by this route of exposure. However it is good
work practice to avoid prolonged inhalation of the vapours which may cause
slight irritation of nose and respiratory tract.
Chronic Prolonged or repeated exposure to this material will result in skin irritation
leading to possible dermatitis, and may aggrevate existing respiratory disorders.
Other Information Poisons Information Centre: 13 1126
First Aid
Swallowed If swallowed, rinse mouth thoroughly with water.
Give water to drink, induce vomiting. Seek medical advice.
Eye If in eyes wash with flowing water for at least 15 minutes. Seek medical
if effects persists.
Skin Wash affected areas with copious quantities of water.
Inhaled If effects occur remove to fresh air. Seek medical attention.
First Aid Facilities No other information available.
Advice to Doctor
Advice to Doctor No specific antidote. Supportive care. Treat symptomatically.
Other Health Hazard Information
PRECAUTIONS FOR USE
Exposure Limits Paint contains various extenders each of which has a WES(Workplace Exposure
Standard) value, but solids are bound into the paint and as such the
applicable standards are not meaningful.
WES values are found in;
Exposure Standards for Atmospheric Contaminants in the Occupational
Environment., Published by Worksafe Australia, October 1995.
Eng. Controls Use in a well ventilated area only.
Other Information No other information available.
Personal Protection
Protective Equip. Avoid skin and eye contact.
Wear clean body-covering clothing. Use gloves that provide a water barrier
and wear safety glasses. Wash hands thoroughly before eating or drinking.
Flammability
Fire Hazards Non combustible. Non flammable.
SAFE HANDLING INFORMATION
Material Safety Data Sheet
Page: 3 of 4
Issue Date : January 2007 RE-ISSUED by HAYMES
Infosafe No. 1HAS8
Product Name : LOW SHEEN ACRYLIC - WHITE , EXTRA DARK & BASES
Hazard Classification not determined by manufacturer at date of issue
Storage and Transport
Storage and Transport Not classified as a dangerous good for transport by road or rail in the
Australian Dangerous Goods Code.
Store in a cool place out of direct sun.
Other Storage Info. Read the use instructions on the label and observe recommendations.
Proper Shipping None Allocated
Name
Spills and Disposal
Spills & Disposal Contain using sand and earth - prevent runoff into drains and waterways.
Organic solvent based products:-
Spills should be absorbed either with rags(small spill) or dry sand/earth(large
spill). Use spark free implements to place rags or absorbed material into a
solvent resistant container. Cover with water for 24 hours before disposal via an
approved waste disposal method.
Waterbased products:-
Retain in a marked sealed container for future use or disposal via special
chemical waste collection programs. Dispose of dried waste materials in approved
landfill. Dried empty cans can be recycled and should be disposed of via council
metal recycling facilities. Wash residues from contaminated area with a copious
quantity of water.
Disposal Prevent contamination of sewers, drains and waterways. Do not pour any left-over
product down the drain. Retain in a marked sealed container for future use or
disposal via special chemical waste collection programs. Dried empty cans can be
recycled and should be disposed of via council metal recycling facilities.
Freecall 1800 807 568 for information relating to clearing up after application or
disposal of surplus product.
Fire/Explosion Hazard
Fire/Explos. Hazard Product is water based emulsion and will not burn. Dried resin may burn.
Use water to extinguish burning dried resin.
Hazardous Reaction Stable at normal conditions. Addition of chemicals and freezing temperatures
may cause coagulation.
Hazchem Code None Allocated
OTHER INFORMATION
Toxicology No acute or chronic toxicity data available for this product. If
recommended precautions for handling and use are adhered to no adverse
effects are anticipated. Trace residual monomers in the polymer emulsion
are not considered to present a significant hazard under normal work
practices and conditions.
Environ. Protection No data available for this formulation.
May be harmful to aquatic life. Avoid contamination of waterways, drains or
sewers. Dilution in water will make the water milky and possibly solids in
the paint will separate and sink to bottom of system.
Pkg. & Labelling No specific requirements with respect to dangerous goods regulations,
workplace OH & S regulations or poisonous substances control regulations.
Paint conforms with the Uniform paint Standard, Schedule 'P' of SUSDP.
Regulatory N/A.
Information
Material Safety Data Sheet
Page: 4 of 4
Issue Date : January 2007 RE-ISSUED by HAYMES
Infosafe No. 1HAS8
Product Name : LOW SHEEN ACRYLIC - WHITE , EXTRA DARK & BASES
Hazard Classification not determined by manufacturer at date of issue
Manufacturers Advice When surfaces, previously sealed with this coating or similar coatings
containing titanium dioxide and/or kaolin and/or calcium carbonate and/or
mica and/or calcium silicate, are prepared by dry sanding or dry blasting
techniques it is recommended that an air-purifying (dust) respirator be
worn to control the inhalable dust concentrations to less than the
recommended Workplace Exposure Standards published by Worksafe Australia
(See reference below). For some operations local exhaust ventilation may be
required to meet this level of control.
Technical Data N/A.
References 'Standard for the Uniform Scheduling of Drugs and Poisons' National Health
and Medical Research Council as amended.
'Exposure Standards for Atmospheric Contaminants in the Occupational
Environment' Worksafe Australia Standard, October 1995.
Empirical Formula & N/A.
Structural Formula
Last Change 27/8/2002
Other Information This MSDS summarises our best knowledge of the health, safety and environmental
information for the product and how to safely handle and use it in the workplace.
A product user should consider the information in the context of how the product
is handled individually or in conjunction with other products. If clarification or
further information about possible risk is required, the user should contact Henry
Haymes Pty. Ltd. Our responsibility for products is subject to our standard terms
and conditions, a copy of which is available on request. Please contact us for any
revisions or updates if you encounter or are using an MSDS which has not been
issued in the last 5 years.
CONTACT POINT
...End Of MSDS...
|