MATERIAL SAFETY DATA SHEET
(COMPLIES WITH 29CFR 1910.1200)
Work/Hygienic Practices: Do not contaminate food or beverages with cleaning
SECTION I - CHEMICAL PRODUCT & COMPANY IDENTIFICATION
chemicals.
Identity (As Used on Label and List): Constant Shield HD-3000, Part B
Product Class: Water-borne floor seal catalyst SECTION IX - PHYSICAL/CHEMICAL CHARACTERISTICS
Emergency Telephone Number: 800-255-3924
Boiling Point: N. Av. pH: N. Ap.
Telephone Number for Information: 651-481-1900
Specific Gravity (H20) = 1: 1.1 % Volatile: N. Av.
Manufacturer's Name and Address:
Vapor Density (Air = 1): > 1 Odor Threshold: N. Av.
Multi-Clean?br>
Evaporation Rate (Butyl Acetate = 1): N. Av. Oil/Water Distribution
600 Cardigan Road
Solubility in Water: Dispensible Coefficient: N. Av.
Shoreview, MN 55126
Vapor Pressure (MM HG): 17.5
Melting Point: N. Ap.
SECTION II - COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components (Specific Chemical Identity):
SECTION X - STABILITY AND REACTIVITY
Chemical Common Name(s) %
Stability: Unstable: Stable: X
A Bisphenol A-epoxy resin 60 - 100
Conditions to Avoid: Avoid heat, flame and contact with strong oxidizing agents.
CAS #25068-38-6
Incompatibility (materials to avoid): Strong oxidizing agents.
B Glycidyl ether 10 - 30
Hazardous Decomposition or By-products: Carbon monoxide, aldehydes and acids
CAS #120547-52-6
may be formed.
C Epichlorohydrin < .1
Hazardous Polymerization: May occur: Will not occur: X
CAS #106-89-8
Conditions to Avoid: None known
D Diglycidyl ether < .1
CAS #2238-07-5 SECTION XI - TOXICOLOGICAL INFORMATION
E Phenyl glycidyl ether < .15
Chemical OSHA PEL ACGIH TLV Recom. LD50 LC50
CAS #122-60-1
A N. Av. N. Av. N. Av. 11.4 g/kg N. Av.
(oral, rat)
SECTION III - HAZARDS IDENTIFICATION B None None N. Av. 10 g/kg N. Av.
Emergency Overview (rat, oral)
Appearance and Odor: White liquid, slight odor. C 2.0 ppm 2.0 ppm N. Av. N. Av. N. Av.
Primary Hazards: Irritant D .1 ppm .1 ppm N. Av. N. Av. N. Av.
Potential Health Hazards E 1.0 ppm 1.0 ppm N. Av. N. Av. N. Av.
Route(s) of Entry: Skin Absorption: X Ingestion: Inhalation:
Eye: May cause irritation on contact. Teratogen, Mutagen, Reproductive Toxin Status: Epoxy resins containing the
Skin: May cause irritation on prolonged or repeated contact. May cause skin diglycidyl ether of bisphenol A, such as this one, have demonstrated mutagenic activity
sensitization in some individuals. in in-vitro microbial and cultured rat liver cell tests. The significance of this information to
Ingestion: May be harmful if swallowed. man is unknown.
Inhalation: No effects expected. Toxicologically Synergistic Products: N. Av.
Signs and Symptoms of Exposure: Skin sensitization may be evidenced by rashes,
SECTION XII - ECOLOGICAL INFORMATION
especially hives.
Ecotoxicological Information: N. Av.
Carcinogenicity: NTP? No IARC Monographs? No
Chemical Fate Information: N. Av.
OSHA Regulated? No
Target Organ (s): No additional data
SECTION XIII - DISPOSAL CONSIDERATIONS
Medical Conditions Generally Aggravated by Exposure: Pre-existing eye, skin and
Waste Disposal Method:
respiratory disorders may be aggravated.
Sewer or incinerate in accordance with existing pollution control ordinances.
Health Hazards, Chronic: See Section XI
RCRA Hazard Class: None
SECTION IV - FIRST AID MEASURES
SECTION XIV - TRANSPORT INFORMATION
Emergency and First Aid Procedures:
Shipping Classification: Shipped with HD-3000 Part A as Paint, lacquer or varnish,
If Swallowed: Call a physician, hospital emergency room or poison control center
N.O.I.
immediately. Eye Contact: Flush eyes with running water for at least 15 minutes. If
UN Number: N. Ap.
irritation persists, obtain medical attention. Skin Contact: Wash affected area with soap
Packing Group: N. Ap.
and water. If irritation persists, obtain medical attention. Remove and wash contaminated
clothing before reuse. SECTION XV - PREPARATION DATA
Sources Used: Raw material data, general toxicology from the trade for similar Prepared By: Mike Tarvin
products. Telephone Number: 651-481-1900
Date: 12-09
SECTION V - FIRE FIGHTING MEASURES
Flammability: No Autoignition Temperature: N. Ap. SECTION XVI - REGULATORY INFORMATION
Flash Point (method used): > 200癋 (93癈) Seta flash US Federal Regulations
Flammable Limits: N. Ap. LEL UEL TSCA Status: All ingredients listed.
Extinguishing Media N. Ap. CERCLA Reportable Quantity: N. Ap.
Water? Foam? Water Fog? X SARA Title III
Alcohol Foam? X CO2? X Dry Chemical? X Section 302 Extremely Hazardous Chemicals: Epichlorohydrin (< 3 ppm)
Vaporizing Liquid? Other? Diglycidyl ether (< 3 ppm)
Special Fire Fighting Procedures: N. Ap. Section 311/312 Hazard Category: Immediate health, chronic health
Unusual Fire and Explosion Hazards: N. Av. Section 313 Toxic Chemicals: Epichlorohydrin (< 3 ppm), Diglycidyl ether
TDG Flammability Classification: Combustible liquid (< 3 ppm)
Sensitivity to Mechanical Impact: None International Regulations
Sensitivity to Static Discharge: None WHMIS Controlled Product Hazard Class: D2B
SECTION VI - ACCIDENTAL RELEASE MEASURES SECTION XVII - OTHER INFORMATION
Steps to be Taken in Case Material is Released or Spilled: None
Dike and contain spill with inert material (sand, earth, etc). Collect spill with mop, N. Ap. - Not Applicable; N.Av. - Not Available
absorbent material (example: floor-dri) or vacuum. Thoroughly rinse affected area
NFPA SYSTEM
with water.
_2_ A. Health Hazard _1_ A. Fire Hazard _0_ A. Reactivity Hazard
SECTION VII - HANDLING AND STORAGE
THE INFORMATION CONTAINED HEREIN IS BASED ON DATA CONSIDERED ACCURATE, HOWEVER NO WARRANTY
Precautions to be Taken in Handling and Storing: IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THESE DATA OR THE RESULTS TO BE OBTAINED
Storage Temperature: Minimum 40癋 (4癈); Maximum 100癋 (38癈) FROM THE USE THEREOF. MINUTEMAN INTERNATIONAL, INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL
INJURY OR PROPERTY DAMAGE TO VENDEES, USERS OR THIRD PARTIES CAUSED BY THE MATERIAL. SUCH
Other Precautions: Keep out of reach of children. Keep from freezing. VENDEES OR USERS ASSUME ALL RISKS ASSOCIATED WITH THE USE OF THE MATERIAL.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Protection (Specify Types): Not required
Ventilation: Local Exhaust: Not required Special: Not required
Mechanical (General): Normal good ventilation sufficient.
Other: Not required
Protective Gloves: Natural rubber or synthetic.
Protective Clothing or Equipment: Not required