Material Safety Data Sheet
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
WHMIS - Workplace Hazardous Materials Information
NTP - National Toxicology Program
System
OSHA - Occupational Safety and Health Administration
14/14 000000008360
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
OSHA Status: Considered : Corrosive
hazardous based on the
following criteria:
OSHA Flammability : Not Regulated
Regulatory VOC (less water and : 107 g/l
exempt solvent)
VOC Method 310 : 9%
U.S. State Regulations:
MASS RTK Components : Triethylenetetramine 112-24-3
Benzyl alcohol 100-51-6
Penn RTK Components : Triethylenetetramine 112-24-3
Modified aliphatic amine NJ TSRN# 51721300-5810P
4-tert-Butylphenol 98-54-4
Benzyl alcohol 100-51-6
NJ RTK Components : Triethylenetetramine 112-24-3
Modified aliphatic amine NJ TSRN# 51721300-5810P
4-tert-Butylphenol 98-54-4
Benzyl alcohol 100-51-6
WARNING! Contains chemicals known to the State of California to cause cancer, birth defects and/or other
reproductive harm:
None known.
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 0 0 = Minimum
1 = Slight
Flammability 1
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Rich Mikol
Legend
ACGIH - American Conference of Governmental Hygienists PEL - Permissible Exposure Limit
CERCLA - Comprehensive Environmental Response, Compensation, and
RCRA - Resource Conservation and Recovery Act
Liability Act
DOT - Department of Transportation RTK - Right To Know
DSL - Domestic Substance List SARA - Superfund Amendments and Reauthorization Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
13/14 000000008360
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
SECTION 10 - REACTIVITY / STABILITY
Substances to avoid : Oxidizing agents.Epoxies.Isocyanates.Acids.
Stability : Material is stable under normal storage, handling, and use.
Hazardous polymerization : Will not occur under normal conditions.
SECTION 11 - TOXICOLOGICAL INFORMATION
Benzyl alcohol, CAS-No.: 100-51-6
Acute oral toxicity (LD-50 oral) 1,580 mg/kg ( Mouse ) 1,940 mg/kg ( Rabbit ) 3,100 mg/kg (
Rat ) 1,230 - 3,100 mg/kg ( Rat )
Acute inhalation toxicity (LC-50) 200 - 300 mg/l for 8 h ( Rat ) 1,000 mg/l for 8 h ( Rat )
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - DISPOSAL CONSIDERATIONS
Disposal Method : Subject to hazardous waste treatment, storage, and disposal requirements under
RCRA. Recycle or incinerate waste at EPA approved facility or dispose of in
compliance with federal, state and local regulations.
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
CORROSIVE LIQUID, N.O.S. (Contains Triethylene tetramine), 8, UN1760, PG II
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.
U.S. Federal Regulations:
SARA 313 Components None present or none present in regulated quantities.
SARA 311/312 Hazards : Based on an evaluation of the components used, this product does not
contain hazardous ingredients identified as per 29 CFR 1910.1200
OSHA Hazardous Components :
12/14 000000008360
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
not in use. Precautions also apply to emptied containers. Do not smoke, weld, generate sparks, or use flame
near container. Do not use in confined or poorly ventilated areas. Personal protective equipment must be worn
during maintenance or repair of contaminated mixer, reactor, or other equipment. Store under dry warehouse
conditions away from heat and all ignition sources.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Wear NIOSH/MSHA approved vapor respirator with appropriate cartridge
when the vapor concentration is expected to exceed exposure limits indicated
on the MSDS. Follow manufacturer's directions for respirator use.
Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to
reduce exposure.
Eye protection : Wear chemical safety goggles and/or face shield to prevent eye contact. Do
not wear contact lenses. Do not touch eyes with contaminated body parts or
materials. Have eye washing facilities readily available.
Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes.
Protective measures : Inspect and replace equipment at regular intervals.Use professional judgment
in the selection, care, and use.
Engineering measures : Use only in well ventilated areas. Provide maximum ventilation in enclosed
areas.Use local exhaust when the general ventilation is inadequate.
Exposure Limits
No known components with exposure limits.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form : Liquid
Color : Clear
Odor : Amine
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : > 500 癋, > 260 癈
Water solubility : Negligible
Specific Gravity : 1.075
% Volatile Weight : 9.9 %
11/14 000000008360
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
Modified aliphatic amine NJ TSRN# 51721300-5810P 15.0 - 40.0
4-tert-Butylphenol 98-54-4 15.0 - 40.0
Benzyl alcohol 100-51-6 7.0 - 13.0
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Move to fresh air. If required, artificial respiration or administration of oxygen can be
performed by trained personnel.Remove to fresh air. Get immediate medical
attention.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical
attention immediately.
Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other
disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash point : > 200 癋, > 93 癈
Method : Setaflash Closed Cup
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Extinguishing media : If water fog is ineffective, use carbon dioxide, dry chemical or foam.
Hazardous combustion : Carbon monoxide and carbon dioxide can form.Smoke, fumes.Nitrogen
products oxides can form.
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : Product may ignite if heated in excess of its flash point.Vapors may
travel to sources of ignition and flashback.Vapor concentrations in
enclosed areas may ignite explosively.Empty containers may contain
ignitable vapors.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Use appropriate protective equipment. Avoid contact with material. Remove sources of ignition immediately.
Stop flow of material if safe to do so. Contain spill and keep out of water courses. Ventilate area.
SECTION 7 - HANDLING AND STORAGE
Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed when
10/14 000000008360
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
SECTION 1 - PRODUCT IDENTIFICATION
Trade name : EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
Product code : 037SC 96
COMPANY : Euclid Chemical Company
19218 Redwood Road
Cleveland, OH 44110
Telephone : 1-800-321-7628
Emergency Phone: : U.S. only: 1-800-255-3924
International Users Call Collect: 1-813-248-0585
Product use : Curative
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
Clear. Liquid. May cause slight irritation to the respiratory system. Move to fresh air. If required, artificial
respiration or administration of oxygen can be performed by trained personnel. Remove to fresh air. Get
immediate medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation May cause slight irritation to the respiratory system.
:
Eyes Vapors or liquid may cause tearing, blurred vision, severe irritation, and possible chemical
:
burns.
Ingestion May cause gastrointestinal irritation, nausea, and vomiting. May cause chemical burns to
:
stomach, mouth, nose, and throat.
Skin May cause itching, reddening, inflammation. May cause severe burns, blistering and skin
:
damage. May cause sensitization resulting in irritation, itching and redness. May cause a
rash.
Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
May cause sensitization by contact. Prolonged skin contact may cause irritation, burns or dermatitis. Repeated
overexposure to vapors and/or material may injure the liver, kidneys and respiratory system unless suitable
engineering controls and/or personal protective equipment are used. May aggravate persons sensitized to
amines. Fillers are encapsulated and not expected to be released from product under normal conditions of use.
SECTION 3 - PRODUCT COMPOSITION
Chemical Name CAS-No. Weight %
Triethylenetetramine 112-24-3 40.0 - 70.0
9/14 000000008360
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 0 0 = Minimum
1 = Slight
Flammability 1
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Rich Mikol
Legend
ACGIH - American Conference of Governmental Hygienists PEL - Permissible Exposure Limit
CERCLA - Comprehensive Environmental Response, Compensation, and
RCRA - Resource Conservation and Recovery Act
Liability Act
DOT - Department of Transportation RTK - Right To Know
DSL - Domestic Substance List SARA - Superfund Amendments and Reauthorization Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
WHMIS - Workplace Hazardous Materials Information
NTP - National Toxicology Program
System
OSHA - Occupational Safety and Health Administration
7/14 000000008358
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
NOT REGULATED
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.
U.S. Federal Regulations:
SARA 313 Components : None present or none present in regulated quantities.
SARA 311/312 Hazards : Based on an evaluation of the components used, this product does not
contain hazardous ingredients identified as per 29 CFR 1910.1200
OSHA Hazardous Components :
OSHA Flammability : Not Regulated
Regulatory VOC (less water and : 0 g/l
exempt solvent)
VOC Method 310 : 0%
U.S. State Regulations:
Penn RTK Components : Bisphenol A Polyglycidyl Ether Resin 25068-38-6
Neopentyl glycol diglycidyl ether 17557-23-2
NJ RTK Components : Bisphenol A Polyglycidyl Ether Resin 25068-38-6
Neopentyl glycol diglycidyl ether 17557-23-2
WARNING! Contains chemicals known to the State of California to cause cancer, birth defects and/or other
reproductive harm:
108-88-3 Toluene
122-60-1 Phenyl glycidyl ether
6/14 000000008358
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
Protective measures : Use professional judgment in the selection, care, and use.Other equipment
not normally required.
Engineering measures : General ventilation is sufficient.
Exposure Limits
No known components with exposure limits.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form : Liquid
Color : Clear to Amber
Odor : Epoxy
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : > 500 癋, > 260 癈
Water solubility : Miscible
Specific Gravity : 1.16
% Volatile Weight : 0.0 %
SECTION 10 - REACTIVITY / STABILITY
Substances to avoid : Acids and bases.Amines.Epoxy curing agents.
SECTION 11 - TOXICOLOGICAL INFORMATION
No Data Available
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - DISPOSAL CONSIDERATIONS
Disposal Method : Not regulated under RCRA. Dispose of in compliance with state and local regulations.
Do not incinerate.
5/14 000000008358
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.
Eye contact : Flush with water for 15 minutes. If irritation persists, get medical attention.
Skin contact : Wash with water. If irritation, rash or other disorders develop, get medical attention
immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash point : > 200 癋, > 93 癈
Method : Setaflash Closed Cup
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Extinguishing media : This product is not expected to burn under normal conditions of use.
Hazardous combustion : Smoke, fumes.
products
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : This product not expected to ignite under normal conditions of use.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Stop flow. Contain spill. Keep out of water courses. Absorb spill in sand, earth or other suitable material.
Transfer to appropriate container for disposal.
SECTION 7 - HANDLING AND STORAGE
Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed when
not in use. Precautions also apply to emptied containers. Store in sealed containers in a dry, ventilated
warehouse location above freezing.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Not required under normal conditions of use.
Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.
Skin and body protection : Not required.
4/14 000000008358
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
SECTION 1 - PRODUCT IDENTIFICATION
Trade name : EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
Product code : 037SC 96
COMPANY : Euclid Chemical Company
19218 Redwood Road
Cleveland, OH 44110
Telephone : 1-800-321-7628
Emergency Phone: : U.S. only: 1-800-255-3924
International Users Call Collect: 1-813-248-0585
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
Clear to Amber. Liquid. May cause slight irritation to the respiratory system. Leave area to breathe fresh air.
Avoid further overexposure. If symptoms persist, get medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation May cause slight irritation to the respiratory system.
:
Eyes Slightly irritating.
:
Ingestion May cause gastrointestinal irritation, nausea, and vomiting.
:
Skin May cause sensitization.
:
Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
May cause sensitization by contact. Prolonged or repeated exposure to epoxy resin can cause irritation to skin,
eyes, skin sensitization, temporary eye injury. Certain epoxy resins are reported to be mutagenic in some
laboratory tests. Fillers are encapsulated and not expected to be released from product under normal conditions
of use.
Target Organs: Skin, Eye, Ingestion
SECTION 3 - PRODUCT COMPOSITION
Chemical Name CAS-No. Weight %
Bisphenol A Polyglycidyl Ether Resin 25068-38-6 > 60.0
Neopentyl glycol diglycidyl ether 17557-23-2 10.0 - 30.0
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
3/14 000000008358
Material Safety Data Sheet
EUCO # 456 PRIMER SEALER CLEAR 1.12 GAL
Version 1. Print Date 10/30/2007
REVISION DATE: 01/30/2007
This is a kit that contains the following components:
EUCO # 456 PRIMER SEALER CLEAR 1.12 PT A
EUCO # 456 PRIMER SEALER - 1.12 GAL PT B
1/14
|