Material Safety Data Sheet Revision Date: 03-30-2007
Product Code: 70714-11
I. PRODUCT AND COMPANY IDENTIFICATION
Product Name: EPOXY RESIN LIGHT GRAY
70714-11
Product Code:
M70714-11
Document ID:
NEOGARD?- a Division of JONES-BLAIR?Company
Company:
2728 Empire Central
Dallas, TX 75235
1-214-353-1600
0
Revision Number:
None
Prior Version Date:
Chemical Family:
ChemTrec Center
Emergency Contact:
1-800-424-9300
Emergency Phone:
II. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: DANGER!
Causes eye burns.
Causes skin burns.
May cause allergic skin reaction.
Vapor harmful.
Harmful if swallowed.
? Ingestion
Routes of Entry:
? Skin contact
? Eye contact
? Inhalation
? Skin
Target Organs Potentially
Affected by Exposure:
?br>
? Skin disorders.
Medical Conditions
Aggravated by Exposure:
Immediate (Acute) Health Effects by Route of Exposure:
Causes nose and throat irritation.
Inhalation Irritation:
Causes skin burns. May cause allergic skin reaction.
Skin Contact:
Causes eye irritation.
Eye Contact:
Harmful if swallowed.
Ingestion Toxicity:
Long-Term (Chronic) Health Effects:
Contains Titanium Dioxide which is listed by IARC as possibly carcinogenic to humans
Carcinogenicity:
(Group 2B). This listing is based on inadequate evidence with respect to humans and
sufficient evidence in experimental animals.
Skin sensitization, characterized by redness, inflammation, itching and/or burning may result
Skin Contact:
from prolonged or repeated contact with this material.
III. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name % CAS #
Oxirane based epoxy homopolymer 40 - 70 25085-99-8
Oxirane, mono[(C12-14-alkyloxy)methyl] 10 - 30 68609-97-2
derivates
Titanium dioxide 5 - 10 13463-67-7
4-Nonylphenol 0.5 - 1.5 84852-15-3
Page 1 of 4
Material Safety Data Sheet Revision Date: 03-30-2007
Product Code: 70714-11
IV. FIRST-AID MEASURES
If you experience difficulty in breathing, leave the area to obtain fresh air. If
Inhalation:
continued difficulty is experienced, get medical attention immediately.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get
Eyes:
medical attention immediately.
Wash with soap and water. Remove contaminated clothing and launder. Get medical attention if
Skin Contact:
irritation develops or persists. Thoroughly wash or discard clothing and shoes before reuse.
If swallowed, do not induce vomiting. Get medical attention immediately.
Ingestion:
V. FIRE FIGHTING MEASURES
Use alcohol foam, carbon dioxide, or water spray when fighting fires
Extinguishing Media:
involving this material.
Material may be ignited only if preheated to temperatures above the high
Fire and/or Explosion Hazards:
flash point, for example in a fire.
Do not enter fire area without proper protection including self- contained
Fire Fighting Methods and Protection:
breathing apparatus and full protective equipment.
Carbon dioxide, Carbon monoxide, Aldehydes
Hazardous Combustion Products:
201 / 94
Flash Point (癋/癈):
VI. ACCIDENTAL RELEASE MEASURES
Follow personal protective equipment recommendations found in
Personal Precautions and Equipment:
Section VIII of this MSDS. Additional precautions may be necessary
based on special circumstances created by the spill including the
material spilled, the quantity of the spill, the area in which the spill
occurred. See MSDS sections III, XIII and XV for disposal
considerations.
Prevent the spread of any spill to minimize harm to human health and
Methods for Clean-up:
the environment if safe to do so. Dike with suitable absorbent material.
Gather and store in a sealed container pending disposal.
VII. HANDLING AND STORAGE
Harmful or irritating material. Avoid contacting and avoid
Handling Technical Measures and Precautions:
breathing the material. Use only in a well ventilated area. As
with all chemicals, good industrial hygiene practices should be
followed when handling this material.
Store in a cool dry place. Keep container(s) closed.
Storage Technical Measures and Conditions:
VIII. EXPOSURE CONTROLS/PERSONAL PROTECTION
Local exhaust ventilation or other engineering controls may be required when handling or
Engineering Measures:
using this product to avoid overexposure.
General or local exhaust ventilation is the preferred means of protection. In cases where
Respiratory Protection:
ventilation is inadequate, respiratory protection may be required to avoid overexposure.
Follow respirator manufacturer's directions for respirator use.
Wear chemically resistant safety glasses with side shields when handling this product.
Eye Protection:
Wear additional eye protection such as chemical splash goggles and/or face shield when
the possibility exists for eye contact with splashing or spraying liquid, or airborne
material.
Avoid all skin contact by covering as much of the exposed skin area as possible with
Skin Protection:
appropriate clothing to prevent skin contact. Wash hands and other exposed areas with
mild soap and water before eating, drinking, and when leaving work. Clothing suitable to
prevent skin contact. Wear chemical resistant gloves.
Control Parameters:
Page 2 of 4
Material Safety Data Sheet Revision Date: 03-30-2007
Product Code: 70714-11
Chemical Name ACGIH TLV-TWA ACGIH STEL OSHA Exposure Limits
Oxirane based epoxy No TLV No PEL established
homopolymer
Oxirane, mono[(C12-14- No TLV No PEL established
alkyloxy)methyl] derivates
Titanium dioxide 10 mg/m?TWA (total total dust: 15 mg/m?TWA
dust)
4-Nonylphenol No TLV No PEL established
IX. PHYSICAL AND CHEMICAL PROPERTIES
Grey
Color:
Liquid
Physical State:
5.27555
VOC (g/l) (Regulatory, Calculated):
(Actual, Calculated) 5.27555
800 - 1400 CPS
Viscosity:
Not Available
Solubility in Water:
0.60182
Volatiles, % by Volume (Calculated):
0.45418
Volatiles, % by weight (Calculated):
9.59 - 9.79
Wt/Gal:
Physical and Chemical Properties are calculated target or range values for single packaged items and do not
represent compliance values for multi-component (mixed) systems.
X. STABILITY AND REACTIVITY
Stable under normal conditions.
Stability:
Oxidizing agents, Acids, Amines, Caustics (bases)
Materials to Avoid/Chemical Incompatibility:
Will not occur.
Polymerization:
Aldehydes, Carbon monoxide, Carbon dioxide
Hazardous Decomposition Products:
XI. TOXICOLOGICAL INFORMATION
Component Toxicology Data:
Chemical Name CAS Number LD50/LC50
Oxirane based epoxy 25085-99-8 Oral LD50 Rat > 5000 mg/kg
homopolymer Dermal LD50 Rabbit 4000 mg/kg
Titanium dioxide 13463-67-7 Oral LD50 Rat > 25 g/kg
Dermal LD50 Rabbit > 10 g/kg
Inhalation LC50 (4h) Rat > 6.82 mg/L
Carcinogens:
Chemical Name CAS Number IARC NTP OSHA
Titanium dioxide 13463-67-7 2B
XII. ECOLOGICAL INFORMATION
Toxicity data, if available, are listed below.
XIII. DISPOSAL CONSIDERATIONS
Refer to other sections of this MSDS to determine the toxicity and
Disposal Methods:
physical characteristics of the material to determine the proper waste
identification and disposal in compliance with applicable regulations.
XIV. TRANSPORTATION INFORMATION
Page 3 of 4
Material Safety Data Sheet Revision Date: 03-30-2007
Product Code: 70714-11
This section provides basic shipping classification information and does not contain all regulatory transportation
details. Refer to all applicable regulations for domestic, international, air, vessel and ground transportation
requirements and restrictions.
Paint, Not-Regulated
DOT Basic Description:
XV. REGULATORY INFORMATION
All components of this product are either listed on the TSCA Inventory; or, are not subject to the
TSCA Status
inventory notification requirements.
SARA EHS Chemicals
Epichlorohydrin 106-89-8 0.001- 0.01
CERCLA
No CERCLA listed chemicals in this
product.
California Prop 65 Chemicals
Cancer
Carbon Black 1333-86-4 0.01 - 0.1
Ethyl Benzene 100-41-4 0.01 - 0.1
Phenyl glycidyl ether 122-60-1 0.001- 0.01
1-Chloro-2,3-epoxypropane 106-89-8 0.001- 0.01
Benzene 71-43-2 0.001- 0.01
Reproductive
Toluene 108-88-3 0.001- 0.01
Benzene 71-43-2 0.001- 0.01
SARA 313
No 313-listed chemicals in this product
SARA 311/312
Health (Acute): Y
Health (chronic): Y
Fire (Flammable): N
Pressure: N
Reactivity: N
The components of this product ARE listed on the Canadian Domestic Substances
CEPA DSL:
List.
D2B
WHMIS Hazard Class:
XVI. ADDITIONAL INFORMATION
Revised MSDS Format
Reason For Revision:
Regulatory Department
Prepared By:
This MSDS has been prepared in accordance with the OSHA Hazard Communication
Disclaimer:
Standard (29 CFR 1910.1200) and Canada's Controlled Product Regulations (CPR). To
the best of our knowledge the information contained herein is accurate. Determination of
safe handling, application and use of this material is the responsibility of the end user. This
information is furnished without warranty, expressed or implied.
March 30, 2007
Print Date:
Page 4 of 4
|