Product: Soldering paste, Art. no:. 5019001 - 5019005 Page 1 of 4
Supplier: TGK (Deutschland) GmbH last saved:17.09.2005
Safety-data-sheet 91/155 EWG Level:31.03.05
Safety data sheet/ EG-Sicherheitsdatenblatt
Date of establishment: 20/01/03
Revision date: 31/03/05
Soldering paste
Product/ Product group:
1.1 Substance/Preparation and Company Name
1.2 Information on the product
1.3 Information on manufacturer/Supplier
Supplier: Tiffany Glaskunst GmbH
Street: Helleforthstr. 18-20
UIP Code/town: D-33758 Schlo?Holte Stukenbrock
Tel.: +49 5207 91280
Fax.: +49 5207 912840
e-mail: tgk@tgk.de
Internet: http://www.tgk.de
Telephone number in emergency cases: 05207-9128-0
2. Composition/Information on Ingredients :
Chemical characteristics:
Emulsion consisting of mineral fats with a watery solution of zinc and ammonium chloride
Dangerous Classification Weight % CAS-No.:
ingredients
Zinc chloride c-corrosive < 5.0 7646-85-7
N-dangerous for
the environment
Ammonium Xn-dangerous for < 1.0 12125-02-9
chloride the health
3. Possible hazards:
Irritates skin and eyes.
4. First Aid Measures:
Inhalation:
Fresh air. Seek medical attention.
Eye contact:
Rinse immediately with plenty of water with opened palpebral fissure for at least 10
minutes. Seek medical help immediately.
Skin contact:
Wash away with plenty of water. Remove contaminated clothing immediately.
Ingestion:
Drink plenty of water. Avoid vomiting (danger of perforation). Seek medical help
immediately.
Product: Soldering paste, Art. no:. 5019001 - 5019005 Page 2 of 4
Supplier: TGK (Deutschland) GmbH last saved:17.09.2005
Safety-data-sheet 91/155 EWG Level:31.03.05
5. Fire fighting measures:
Appropriate extinguishing media:
Carbon dioxide, foam, extinguishing powder.
Unadequate extinguising media for safety reasons:
Water.
Special hazards by the material or the composition, its combustion products or
generated gases:
In case of fire, noxious fumes can be generated (chlorine, HCI and carbon monoxide)
Special protection equipment for fire fighting:
Independant respiratory protection device.
6. Accidental release measures:
Personal precaution measures:
Avoid skin contact.
Environmental protection measures:
Do not let pass into canalisation.
Measures for cleaning up/absorbing
Take mechanically up with appropriate binding agent, pass on to waste disposal.
7. Handling and storage:
Handling:
Information for secure handling:
Provide for good room ventilation. Adhere to instructions on label..
Storage:
Requirements for storage rooms and containers:
Store containers firmly locked in dry and well ventilated place.
Requirements for fire and explosion protection measures:
No special requirements.
8. Expose controls and personal protection:
Requirements for the design of technical plants:
Use exhaustion device.
Personal protection equipment:
Hand:
Material:
Nitril
e.g. KCL-dermatril (740)
Permeation time: 480 min.
Material:
Butyl
e.g.
KCL-butoject (898)
Permeation time: 480 min.
Eyes:
Protection goggles.
Product: Soldering paste, Art. no:. 5019001 - 5019005 Page 3 of 4
Supplier: TGK (Deutschland) GmbH last saved:17.09.2005
Safety-data-sheet 91/155 EWG Level:31.03.05
Body:
Appropriate working clothes
9. Physical and chemical properties:
?Form: pasty
?Colour: light yellow
?Odour: odourless
?pH-value (watery extract 20 %): 6,1
o
?Boiling point/Boiling range (in C): --
o
?Melting/Melting range (in C): ca. 55?C
?Flaming point: > 150?C
3
?Specific gravity at 20癈: ca 1 g/cm
?Solubility in water: --
?Explosion danger: --
?PH-value 6.1
?Vapour pressure: > 0,01 mbar
2
?Viscosity at 100?C: 7,0 x 9,0 mm /s DIN 51562
10. Stability and reactivity:
Conditions to avoid:
Long-term storage time at temperatures above 25?C (quality deterioration)
Products to avoid:
Avoid contact with strong oxidating agents.
Dangerous decompositon products
In case of uncomplete combustion: formation of fume and carbon monoxide.
Thermic decomposition:
> 300癈
11. Toxicological information:
Information on irritating effects:
Irritates eyes and mucous membranes.
Ingestion:
After ingesting greater quantities zinc chloride, blood pressure decrease, circulatory
disturbances.
12. Ecological information:
Concerns zinc chloride:
Is not biologically degradable
Acute fish toxicity: 0,1 ?1 g/l zinc chloride
Fish toxicity limit: 0,1 - 2 mg/l zinc
13. Disposal considerations:
For the material/residues
Recommendation:
Residue is special waste and has to be passed on to an appropriate waste disposal pit
according to special waste legislation.
Waste code no (AVV): 060313
Designation (AVV): solid salts and solutions containing heavy metals
Group (AVV): Waste derived from salts, salt solutions and metal oxides
Disposal method: chemical/physical treatment plant
For contaminated packing:
According to official regulations.
Product: Soldering paste, Art. no:. 5019001 - 5019005 Page 4 of 4
Supplier: TGK (Deutschland) GmbH last saved:17.09.2005
Safety-data-sheet 91/155 EWG Level:31.03.05
14. Transport information:
Dangerous good according to transport regulations: NO
15. Regulatory information:
N-dangerous for the environment
Dangerous component:
Zinc chloride
R-phrases:
51/53 Toxic for water organisms, can have long-term noxious effects
in waters
S-phrases:
1+2 Store firmly locked and away from access of children
46 In case of ingestion, seek medical attention immediately and
show packing or label
61 Avoid release into environment.
Obtain special instructions, consult safety data sheet
Water hazard class: 2
16. Additional Information:
The information contained herein is based on the present state of our knowledge and
does not therefore guarantee certain properties. Recipients of our product must take
responsibility for observing existing laws and regulations.
|