---------------------------------------------------------
MATERIAL SAFETY DATA SHEET
---------------------------------------------------------
---------------------------------------------------------------------------
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
---------------------------------------------------------------------------
PRODUCT NAME : CLEAR PEN-LUBE
IDENTIFICATION NUMBER: 4550 DATE PRINTED: 08/28/07
PRODUCT USE/CLASS : LUBRICANT
MANUFACTURER/SUPPLIER:
INTERNATIONAL EPOXIES AND SEALERS
30241 COMMERCE DRIVE
SAN ANTONIO, FL 33576
TELEPHONE: (800) 451-7206
EMERGENCY TELEPHONE: INFOTRAC: 1-800-535-5053
OUTSIDE THE U.S. CALL COLLECT: 1-352-323-3500
---------------------------------------------------------------------------
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
---------------------------------------------------------------------------
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER LESS THAN
---------------------------------------------------------------------------
01 PROPANE/ISOBUTANE/N-BUTANE 68476-86-8 35.0 %
02 N-HEPTANE 142-82-5 20.0 %
03 OLEFIN POLYMER PROPRIETARY 15.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 1000 PPM N.E. 800 PPM N.E. N.E. YES
02 400 PPM 500 PPM 400 PPM 500 PPM N.E. YES
03 5 MG/M3 10 MG/M3 5 MG/M3 N.E. N.E. YES
(See Section 16 for abbreviation legend)
(Continued on Page 2)
---------------------------------------------------------------------------
Product: 4550 Preparation Date: 08/28/07 Page 2
---------------------------------------------------------------------------
SECTION 3 - HAZARDS IDENTIFICATION
---------------------------------------------------------------------------
*** EMERGENCY OVERVIEW ***: Vapors irritating to eyes and respiratory
tract. Vapors may cause flash fire or explosion.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by a stinging sensation and/or a feeling like that of fine dust
in the eyes.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can
result in defatting and drying of the skin which may result in skin
irritation and dermatitis (rash).
EFFECTS OF OVEREXPOSURE - INHALATION: Headaches, dizziness, nausea,
decreased blood pressure, changes in heart rate and cyanosis may result
from over-exposure to vapor or skin exposure. Prolonged inhalation may be
harmful.
EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal
if swallowed. If a Corrosive product, may cause severe and permanent
damage to mouth, throat and stomach.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Overexposure may cause nervous
system damage. Overexposure may cause lung damage. Overexposure may cause
kidney damage. May cause liver disorder (e.g., edema, proteinuria) and
damage.
PRIMARY ROUTE(S) OF ENTRY: INHALATION SKIN ABSORPTION SKIN CONTACT EYE
CONTACT INGESTION
---------------------------------------------------------------------------
SECTION 4 - FIRST AID MEASURES
---------------------------------------------------------------------------
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water. Get
medical attention, if irritation persists.
FIRST AID - SKIN CONTACT: Wash with soap and water. Get medical attention
if irritation develops or persists.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention.
FIRST AID - INGESTION: Get medical attention immediately. If swallowed,
do NOT induce vomiting. Give victim a glass of water or milk. Call a
physician or poison control center immediately. Never give anything by
mouth to an unconscious person.
(Continued on Page 3)
---------------------------------------------------------------------------
Product: 4550 Preparation Date: 08/28/07 Page 3
---------------------------------------------------------------------------
SECTION 5 - FIRE FIGHTING MEASURES
---------------------------------------------------------------------------
FLASH POINT: -156 F LOWER EXPLOSIVE LIMIT: 1.2 %
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: 9.5 %
AUTOIGNITION TEMPERATURE: ND
EXTINGUISHING MEDIA: WATER FOG DRY CHEMICAL CO2 FOAM ALCOHOL FOAM
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors can travel to a source of
ignition and flash back. "Empty" containers retain product residue (liquid
and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH. Empty drums should be completely drained, properly
bunged and promptly returned to a drum reconditioner, or properly disposed
of.
SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if
exposed to heat (fire). As in any fire, wear self-contained breathing
apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full
protective gear.
---------------------------------------------------------------------------
SECTION 6 - ACCIDENTAL RELEASE MEASURES
---------------------------------------------------------------------------
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill
with inert material (e.g. dry sand or earth), then place in a chemical
waste container.
---------------------------------------------------------------------------
SECTION 7 - HANDLING AND STORAGE
---------------------------------------------------------------------------
HANDLING: Wash thoroughly after handling.
STORAGE: Keep away from heat, sparks and flame. Keep from freezing.
---------------------------------------------------------------------------
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
---------------------------------------------------------------------------
ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to
control any air contaminants to within their TLVs during the use of this
product.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying respirator
with an organic vapor cartridge or canister may be permissible under
certain circumstances where airborne concentrations are expected to exceed
(Continued on Page 4)
---------------------------------------------------------------------------
Product: 4550 Preparation Date: 08/28/07 Page 4
---------------------------------------------------------------------------
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
---------------------------------------------------------------------------
exposure limits. Protection provided by air purifying respirators is
limited. Use a positive pressure air supplied respirator if there is any
potential for an uncontrolled release, exposure levels are not known, or
any other circumstances where air purifying respirators may not provide
adequate protection.
SKIN PROTECTION: Where contact is likely, wear chemical resistant gloves,
a chemical suit, rubber boots, and chemical safety goggles plus a face
shield.
EYE PROTECTION: Wear safety glasses with side shields (or goggles) and a
face shield.
OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD
BE FOLLOWED.
HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated
clothing and wash before reuse. Use only in a well ventilated area.
Follow all MSDS/label precautions even after container is emptied because
they may retain product residues. Avoid prolonged or repeated contact with
skin. Avoid breathing vapors from heated material. Avoid contact with
eyes, skin, and clothing.
---------------------------------------------------------------------------
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
---------------------------------------------------------------------------
BOILING RANGE : -43 - 209 F VAPOR DENSITY : Is heavier than air
ODOR : SOLVENT ODOR THRESHOLD : ND
APPEARANCE : CLEAR EVAPORATION RATE: Is faster than Butyl
SOLUBILITY IN H2O : NEGLIGIBLE Acetate
FREEZE POINT : 32 SPECIFIC GRAVITY: 0.6947
VAPOR PRESSURE : 80-90 pH @ 0.0 % : NA
PHYSICAL STATE : LIQUID VISCOSITY : NA
COEFFICIENT OF WATER/OIL DISTRIBUTION: NEGLIGIBLE
(See Section 16 for abbreviation legend)
---------------------------------------------------------------------------
SECTION 10 - STABILITY AND REACTIVITY
---------------------------------------------------------------------------
CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN
FLAMES.
INCOMPATIBILITY: STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES.
HAZARDOUS DECOMPOSITION PRODUCTS: OXIDES OF CARBON, OXIDES OF NITROGEN,
AND MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE.
(Continued on Page 5)
---------------------------------------------------------------------------
Product: 4550 Preparation Date: 08/28/07 Page 5
---------------------------------------------------------------------------
SECTION 10 - STABILITY AND REACTIVITY
---------------------------------------------------------------------------
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
---------------------------------------------------------------------------
SECTION 11 - TOXICOLOGICAL PROPERTIES
---------------------------------------------------------------------------
PRODUCT LD50: 7100 mg/kg PRODUCT LC50: 103000 ppm
COMPONENT TOXICOLOGICAL INFORMATION:
----------- CHEMICAL NAME ----------- ------ LD50 ------ ------ LC50 ------
PROPANE/ISOBUTANE/N-BUTANE NE 658000 MG/M3/4HRAT
HYDROTREATED,SEVERE,LT. NAPHTHENIC DI NE NE
N-HEPTANE >7100 MG/KG/RAT 103000 MG/M3/4H/RA
OLEFIN POLYMER ND ND
PETROLATUM >50000 MG/KG/MOUSE NE
LUBE OIL ADDITIVE NE NE
MINERAL OIL HYDROTREATED (SEVERE) ND ND
ALUMINUM ISOPROPOXIDE 11300 MG/KG/RAT NE
POLYTETRAFLUOROETHYLENE NE NE
PETROLEUM LUBRICATING GREASE NE NE
TETRAFLUOROETHYLENE N.E. 40000 PPM/RAT
---------------------------------------------------------------------------
SECTION 12 - ECOLOGICAL INFORMATION
---------------------------------------------------------------------------
ECOLOGICAL INFORMATION: No Information.
---------------------------------------------------------------------------
SECTION 13 - DISPOSAL CONSIDERATIONS
---------------------------------------------------------------------------
DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL
REGULATIONS.
---------------------------------------------------------------------------
SECTION 14 - TRANSPORTATION INFORMATION
---------------------------------------------------------------------------
DOT PROPER SHIPPING NAME: AEROSOL - CONSUMER COMMODITY
DOT TECHNICAL NAME: ORM-D
DOT HAZARD CLASS: 2.1 HAZARD SUBCLASS: NA
(Continued on Page 6)
---------------------------------------------------------------------------
Product: 4550 Preparation Date: 08/28/07 Page 6
---------------------------------------------------------------------------
SECTION 14 - TRANSPORTATION INFORMATION
---------------------------------------------------------------------------
DOT UN/NA NUMBER: UN1950 PACKING GROUP: NA RESP. GUIDE PAGE: 126
---------------------------------------------------------------------------
SECTION 15 - REGULATORY INFORMATION
---------------------------------------------------------------------------
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD FIRE HAZARD PRESSURIZED GAS HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % IS LESS THAN
No SARA Section 313 components exist in this product.
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
N-HEPTANE 142-82-5
U.S. STATE REGULATIONS: AS FOLLOWS -
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
HYDROTREATED,SEVERE,LT. NAPHTHENIC DIST. 64742-52-5
PETROLATUM 8009-03-8
(Continued on Page 7)
---------------------------------------------------------------------------
Product: 4550 Preparation Date: 08/28/07 Page 7
---------------------------------------------------------------------------
SECTION 15 - REGULATORY INFORMATION
---------------------------------------------------------------------------
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
HYDROTREATED,SEVERE,LT. NAPHTHENIC DIST. 64742-52-5
PETROLATUM 8009-03-8
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
TETRAFLUOROETHYLENE 116-14-3
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
---------------------------------------------------------------------------
SECTION 16 - OTHER INFORMATION
---------------------------------------------------------------------------
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 4 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 01/20/05
REASON FOR REVISION:
NEW FORMAT
VOLATILE ORGANIC COMPOUNDS (VOCS): 2.93 lbs/gal, 351 grams/ltr
LEGEND: N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
---------------------------------------------------------------------------
The information contained on this MSDS is been checked and should be
accurate. However, it is the responsibility of the user to comply with all
Federal, State, and Local laws and regulations.
---------------------------------------------------------------------------
|