Water Tight Technologies, LLC
3815 River Crossing Parkway, Ste 100
Indianapolis, IN 46240
SECTION 1 ?PRODUCT IDENTIFICATION
Product Name: 24 Hour Emergency Telephone Number:
White EPDM Membrane (Bi-Laminate) 800-424-9300 CHEMTREC
Chemical Name/Synonyms: Manufacturer's Name:
NA Water Tight Technologies, LLC
Chemical Family: Manufacturer's Address:
Mixture 3815 River Crossing Parkway, Ste 100
Indianapolis, IN 46240
NFPA Acute Hazard Rating:
Chemical Formula:
Health 0, Flammability 1, Reactivity 0
NA
HMIS Acute Hazard Rating:
Health 0, Flammability 1, Reactivity 0
SECTION 2 ?CHEMICAL COMPOSITION
Ingredient Components (chemical names) OSHA (1910. 1200) Case No. % wt or % vol OSHA STEL OSHA PEL ACGIH TLV
Titanium Oxide 13463-67-7 *
Decabromodiphenyl Oxide 1163-19-5 *
Antimony Trioxide 1309-64-4 *
Zinc Oxide 1314-13-2 *
Carbon Black 1333-86-9 *
Silica, amorphous 7631-86-9 *
EPDM Polymer 25038-36-2 *
Petroleum Hydrocarbon Oil 8042-47-5 *
*Proprietary
Hazardous Ingredients:
This material is a fully vulcanized rubber sheet which falls under the article exemption provided for under OSHA 1910.1200.
There are no recognized hazards associated with normal use of this product.
SECTION 3 ?PHYSICAL & CHEMICAL CHARACTERISTICS
Physical State:
Appearance/Odor: Solubility in Water:
Solid
Rubber-like odor, white/black sheet Insoluble
Boiling Point: Specific Gravity (HO=1) Melting Point:
NA NA
1.24
Vapor Pressure: Vapor Density (Air=1) Freezing Point:
NA NA
NA
Percent Volatiles: Evaporation Rate: Reactivity in Water:
NA NA NA
pH (Full Strength) pH (Recommended Dilution): Refraction Index:
NA NA NA
White EPDM (Bi-Laminate) 1/4
March 21, 2007
Water Tight Technologies, LLC
3815 River Crossing Parkway, Ste 100
Indianapolis, IN 46240
SECTION 4- FIRE & EXPLOSION HAZARD DATA
Flash Point: Flammable Limits (in air):
Above 260 C Open Cup Not Established
Extinguishing Media: Fire Fighting Procedures:
Water fog followed by standard fire extinguishers-course Firefighters should wear full protective clothing including self-
stream. contained breathing apparatus to prevent inhalation of smoke
Dry chemical and foam can also be used. and decomposition products. Toxic fumes and vapors may be
involved.
Special Fire & Explosion Hazards:
Hazardous Decomposition Products:
Oil "bleeds" from material when burning.
Carbon Dioxide, Carbon Monoxide, Oxides of Nitrogen, Sulfur
Dioxide, and partially burned Carbon.
Method Used: Auto-Ignition Temperature:
Not Established Unknown
SECTION- 5 HEALTH HAZARD DATA
Signs and Symptoms of Exposure:
Permissible Exposure Limit:
Not Established
Under normal conditions of use, this product will not release
Effects of Overexposure:
or otherwise result in exposure to hazardous chemicals.
Medical Conditions Aggravated By Exposure
Sensitive individuals may exhibit eye, nose, throat or dermal
Toxic fumes may be released during fire. Exposure to fumes may
irritation with prolonged exposure to processing fumes or
aggravate pre-existing eye, lung, and skin conditions.
vapors.
Acute: Carcinogenicity:
No known effects
IARC, NTP, and OSHA do not list this product as a
Chronic: carcinogen.
No known adverse effects
Emergency & First Aid Procedures:
Eye Contact:
Not Established
Skin Contact:
Physical form should preclude and harmful effect from contact.
Inhalation:
NA
Ingestion:
Consult a Physician
Primary Route of Entry:
None
White EPDM (Bi-Laminate) 2/4
March 21, 2007
Water Tight Technologies, LLC
3815 River Crossing Parkway, Ste 100
Indianapolis, IN 46240
SECTION 6 ?REACTIVITY DATA
Stability: Incompatibility:
Stable Not Established
Hazardous Decomposition Products: Hazardous Polymerization:
Toxic gases or vapors, such as carbon monoxide, carbon dioxide,
Will not occur
or oxides of nitrogen may be released during a fire.
Conditions to Avoid:
Open flames.
SECTION 7 - SPILL OR LEAK PROCEDURES
Steps to be taken in case material is released or spilled:
Small spill:
Scoop or shovel material into sealed containers.
Large Spill:
Same as small spill.
Waste Disposal Method:
Dispose of in accordance with local, state, and federal regulations.
SECTION 8 ?SPECIAL PROTECTION
Respiratory Protection: Eye Protection:
NA Safety glasses recommended
Protective Gloves: Other Protective Equipment:
Gloves are recommended to prevent skin contact. None required under normal installation conditions.
Ventilation:
Provide adequate ventilation to maintain airborne concentrations below OSHA PELs .
White EPDM (Bi-Laminate) 3/4
March 21, 2007
Water Tight Technologies, LLC
3815 River Crossing Parkway, Ste 100
Indianapolis, IN 46240
SECTION 9 ?SPECIAL PRECAUTIONS OR OTHER COMMENTS
Storage/Handling:
Store in cool, dry, well ventilated facility.
Other Precautions:
Store material in original shipping packaging.
Work/Hygenic Practices:
Maintain good personal hygiene practices. Wash contaminated clothing before reuse. Do not eat, drink, or smoke in work areas.
Wash exposed skin before eating, drinking, smoking, or applying cosmetics.
SECTION 10 - TRANSPORTATION
Regulatory Agency: Identification Number:
Not Regulated Not Applicable
Labels Required:
Proper Shipping Name:
Not Applicable Not Applicable
Hazard Classification: Other Requirements:
Not Applicable Not Applicable
SECTION 11 ?MISCELLANEOUS INFORMATION
Additional Comments:
This product is considered to be a finished article as per 29 CFR 1910.1200 ?and is therefore exempt from the requirements of
the Hazard Communication standard.
Date of Previous MSDS:
November 1992
Changes Since Previous MSDS:
Comment change in sections: 1 thru 9
Add sections: 10,11
Telephone Number for Additional Information:
(574) 293-9096
DISCLAIMER
The information contained herein is based on data considered accurate which has been obtained from other
companies and organizations. However, no warranty or representation is expressed or implied that the information
is accurate, complete, or representative. Roofing Products International, Inc. assumes no responsibility for injury to
the buyer, the buyer's employees, or any third persons if reasonable safety procedures are not followed.
White EPDM (Bi-Laminate) 4/4
March 21, 2007
|