SECTION III - HAZARDS IDENTIFICATION
_______________________________________________________________________________
HAZARD RATINGS: Health: 0 Fire: 1 Reactivity: 0 PPI: A
PERMISSIBLE EXPOSURE LEVEL:
This is a polymeric compound. All ingredients are encapsulated
by the polymer and present no likelihood of exposure under
normal conditions of processing and handling.
EFFECTS OF OVEREXPOSURE:
ACUTE OR IMMEDIATE EFFECTS:
INGESTION: Not a probable route of exposure.
SKIN: Pellets are not likely to cause irritation.
Contact with molten material may cause thermal burns.
Processing fumes may cause irritation.
EYE: Solid/dust may cause irritation due to mechanical action.
Processing fumes may cause irritation.
INHALATION: Processing fumes may cause irritation to the
respiratory tract.
(cont.)
Page: 2 Data Sheet for: RTP PP 30 GF FR0 BLK
SECTION III - HAZARDS IDENTIFICATION (cont.)
_______________________________________________________________________________
EFFECTS OF OVEREXPOSURE: (cont.)
CHRONIC EFFECTS: None known for this compound.
_______________________________________________________________________________
SECTION IV - FIRST AID MEASURES
_______________________________________________________________________________
FIRST AID:
EYES: Flush with water. Consult physician if symptoms persist.
SKIN: Wash with soap and water. For thermal burns, immediately
flush with cold water. Do not attempt to remove polymer
from skin. Obtain medical attention.
INHALATION: Leave exposed area and seek fresh air. If
irritation persists seek medical attention.
_______________________________________________________________________________
EXTINGUISHING MEDIA:
Water spray and foam. Water spray is preferred.
Dry chemical and CO2 are not generally recommended due to
their lack of cooling capacity which may allow re-ignition.
SPECIAL FIREFIGHTING PROCEDURES:
Persons exposed to products of combustion should wear NIOSH
approved self contained breathing apparatus and full protective
equipment.
UNUSUAL FIRE & EXPLOSION HAZARDS:
This compound has no unusual fire or explosion hazards.
_______________________________________________________________________________
SECTION VI - ACCIDENTAL RELEASE MEASURES
_______________________________________________________________________________
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Spilled pellets may cause a slipping hazard. Sweep area as
needed.
_______________________________________________________________________________
SECTION VII - HANDLING AND STORAGE
_______________________________________________________________________________
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
Store in a dry, sprinkler equipped warehouse.
Product as shipped is not a combustible dust. Mechanical
handling can cause the formation of dusts. To reduce
(cont.)
Page: 3 Data Sheet for: RTP PP 30 GF FR0 BLK
SECTION VII - HANDLING AND STORAGE (cont.)
_______________________________________________________________________________
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: (cont.)
the risk for dust explosion do not permit dust to
accumulate.
OTHER PRECAUTIONS:
Proper purging and shut down procedures should be followed to
avoid overheating of this compound.
_______________________________________________________________________________
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
_______________________________________________________________________________
RESPIRATORY PROTECTION:
A NIOSH approved respirator is recommended for protection
against processing fumes, or from dust generated from
grinding, sanding, or sawing operations.
VENTILATION:
Local exhaust is preferred.
PROTECTIVE GLOVES:
Canvas or cotton gloves are recommended.
EYE PROTECTION:
Safety glasses with side shields are recommended.
OTHER PROTECTIVE EQUIPMENT:
None.
_______________________________________________________________________________
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
_______________________________________________________________________________
BOILING RANGE: None VAPOR DENSITY: Non Volatile
EVAP. RATE: Unavailable SPECIFIC GRAVITY: 1.51
VOLATILES: volume %: N/AP weight %: N/AP
APPEARANCE: Cylindrical Pellets No Odor
_______________________________________________________________________________
SECTION X - STABILITY AND REACTIVITY
_______________________________________________________________________________
STABILITY: [ ] Unstable [x] Stable
HAZARDOUS POLYMERIZATION: [ ] May Occur [x] Will Not Occur
INCOMPATIBILITY:
Strong oxidizing agents.
CONDITIONS TO AVOID:
None known for this compound.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon monoxide, carbon dioxide. Trace amounts of acrolein,
(cont.)
Page: 4 Data Sheet for: RTP PP 30 GF FR0 BLK
SECTION X - STABILITY AND REACTIVITY (cont.)
_______________________________________________________________________________
HAZARDOUS DECOMPOSITION PRODUCTS: (cont.)
formaldehyde, aldehydes, acids, ketones, and other
unidentifiable organic compounds may be formed.
Brominated hydrocarbons, hydrogen bromide, bromine.
_______________________________________________________________________________
SECTION XI - TOXICOLOGICAL INFORMATION
_______________________________________________________________________________
TOXICITY DATA:
No specific toxicological information is available.
_______________________________________________________________________________
SECTION XII - ECOLOGICAL INFORMATION
_______________________________________________________________________________
ECOTOXICITY:
No specific ecological information is available. This material
is considered to be non-biodegradable.
_______________________________________________________________________________
SECTION XIII - DISPOSAL CONSIDERATIONS
_______________________________________________________________________________
WASTE DISPOSAL METHOD:
The pellets, regrind, and purge of this material are non-
hazardous and may be discarded in accordance with state,
federal, and local regulations.
_______________________________________________________________________________
SECTION XIV - TRANSPORT INFORMATION
_______________________________________________________________________________
D.O.T. SHIPPING INFORMATION:
Not regulated under US Department of Transportation.
_______________________________________________________________________________
SECTION XV - REGULATORY INFORMATION
_______________________________________________________________________________
SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the
reporting requirements of section 313 of the Emergency Planning
and Community Right To Know Act of 1986 and of 40 CFR 372:
SECTION XV - REGULATORY INFORMATION (cont.)
_______________________________________________________________________________
TSCA 12(b) EXPORT NOTIFICATION STATUS:
This product contains Decabromodiphenyl Oxide (CAS 1163-19-5)
which is a TSCA 12b chemical. TSCA 12b requires export
notification to the US EPA.
This product contains very low impurity levels (less than 0.05%)
of the following substances:
- Tetrabromodiphenyloxide (CAS # 40088-47-9)
- Pentabromodiphenyloxide (CAS # 32534-81-9)
- Hexabromodiphenyloxide (CAS # 36483-60-0)
- Heptabromodiphenyloxide (CAS # 68928-80-3)
- Octabromodiphenyloxide (CAS # 32536-52-0)
This product contains low impurity levels (less than 1%)
of the following substances:
- Nonabromodiphenyloxide (CAS # 63936-56-1)
TSCA 12b requires notification to the US EPA prior to export.
_______________________________________________________________________________
SECTION XVI - OTHER INFORMATION
_______________________________________________________________________________
MSDS DISCLAIMER
RTP Company believes that the information contained herein is
accurate as of the date hereof. HOWEVER, NO REPRESENTATIONS
OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE
HEREIN AS TO THE INFORMATION PROVIDED OR THE PRODUCT TO WHICH THE
INFORMATION REFERS. The health and safety precautions contained
herein may not be adequate for all individuals and/or situations.
It is the user's obligation to evaluate and use this product
safely and to comply with all applicable laws and regulations.
Nothing contained herein shall be construed as a license for the
use of any product in a manner that would infringe existing
patents.