MATERIAL SAFETY DATA SHEET
HMIS HAZARD RATINGS
OSHA - Meets 29 CFR 1910.1200 Standards
HEALTH * = Chronic Health Hazard 2 = MODERATE
3
FLAMMABILITY 0 = INSIGNIFICANT 3 = HIGH
1
PHYSICAL HAZARD 1 = SLIGHT 4 = EXTREME
0
TRANSPORTATION INFORMATION
PROPER SHIPPING NAME: Corrosive liquid, basic, organic, n.o.s. (m-xylylenediamine )
HAZARD CLASS / PKG GRP: 8 / III 49 CFR 173.154, .203, .241
REF:
IDENTIFICATION NUMBER: UN 3267 LABEL: CORROSIVE
SECTION 1 - PRODUCT / COMPANY IDENTIFICATION
IDENTITY (AS USED ON LABEL AND LIST)
Page 1 of 2
V - 570 PANCRETE Part B
MANUFACTURER'S NAME EMERGENCY TELEPHONE NUMBER
Controlled Release Technologies, Inc. ChemTel Inc. 1- (800) 255-3924 Intl. + 01 (813) 248-0585
ADDRESS (NUMBER, STREET, P.O. BOX) TELEPHONE NUMBER FOR INFORMATION
1016 Industry Drive (704) 487-0878
(CITY, STATE AND ZIP CODE) DATE PREPARED: September 14, 2007
Shelby, NC 28152 SUPERSEDES: November 2, 2002
SECTION 2 - HAZARDOUS INGREDIENTS / IDENTITY INFORMATION
OSHA PEL ACGIH TWA
HAZARDOUS COMPONENTS % SARA RQ
CAS #
TITLE III LBS
(OPTIONAL) PPM MG/M3 PPM MG/M3
(SPECIFIC CHEMICAL IDENTITY; COMMON NAME(S))
Benzyl Alcohol 100-51-6 5 - 10 not established
Benzene 1,3-dimethaneamine (d) 1477-55-0 5 - 10 0.1 C 0.1 C
Isophoronediamine 2855-13-2 10 - 30 not established
Antimony trioxide (a,b,c) 1309-64-4 5 - 10 0.5 0.5 Yes 1000
Decabromodiphenyl oxide 1163-19-5 10 - 30 15 10
Petroleum distillate, aliphatic 64742-47-8 1-5 100 525
Petroleum distillate, aromatic 64742-95-6 1-5 400 1600
(a) A "Yes" in the SARA TITLE III column in Section 2 indicates a toxic chemical subject to annual reporting requirements of Section 313 of the Emergency
Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372.
(b) The Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) has notification requirements for releases or spills to the
environment of the Reportable Quantity (RQ for this mixture = 7,000 lbs) or greater amounts, according to 40 CFR 302.
(c) California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986, chemicals known to the state to cause cancer or reproductive toxicity. A
person in the course of doing business must warn others who may consume, come into contact with, or otherwise be exposed to this chemical.
(d) A "C" in the OSHA PEL or ACGIH TWA column indicates ceiling limits, the concentration that should not be exceeded during any part of the working
exposure.
SECTION 3 - HEALTH HAZARD DATA
ROUTES OF ENTRY - SIGNS AND SYMPTOMS OF EXPOSURE EMERGENCY AND FIRST AID PROCEDURES
INHALATION: Corrosive and irritating to upper respiratory tract and mucous Remove affected person to fresh air; wash mouth and nasal passages with
membranes. water repeatedly; if breathing difficulties persist seek medical attention.
SKIN: Corrosive and irritating; chemical burns may result from contact; severe Wash contacted area with soap and water; DO NOT attempt to neutralize
irritant. with chemical agents; if irritation persists, seek medical attention.
EYES: CORROSIVE; Contact with eyes is painful and irritating and may cause Remove contact lenses. Immediately flush eyes for 15 minutes in clear
chemical burns, necrosis and permanent injury. running water while holding eyelids open; seek medical attention immediately.
INGESTION: Corrosive and irritating to digestive tract; may cause gastric Drink large quantities of water or milk; give diluted vinegar or lemon juice to
distress, stomach pains and vomiting. conscious person; DO NOT induce vomiting; seek medical attention
immediately.
CARCINOGENICITY No Yes No
NTP? IARC MONOGRAPHS? OSHA REGULATED?
Antimony trioxide (antimony oxide) is an IARC (Group IIB) suspect carcinogen
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Preexisting skin, eye, or respiratory disorders may become aggravated through
prolonged exposure.
MATERIAL SAFETY DATA SHEET
IDENTITY (AS USED ON LABEL AND LIST) Page 2 of 2
V - 570 PANCRETE Part B Date: September 14, 2007
SECTION 4 - FIRE FIGHTING MEASURES
FLASH POINT (METHOD USED) NFPA RATING FLAMMABLE LIMITS
> 200?F (> 93.3?C) IIIB LEL: Not applicable UEL: Not applicable
EXTINGUISHING MEDIA
Carbon dioxide, water fog, dry chemical, chemical foam
SPECIAL FIRE FIGHTING PROCEDURES
Firefighters must wear full facepiece self - contained breathing apparatus in positive pressure mode. Do not use solid stream of water since stream will
scatter and spread fire. Fine water spray can be used to keep fire - exposed containers cool.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Closed containers can explode due to buildup of pressure when exposed to extreme heat.
SECTION 5 - ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: CAUTION - CORROSIVE, WILL SUPPORT COMBUSTION. Do not wash to sanitary
sewer. Large spills - confine spill, soak up with approved absorbent, shovel product into approved container for disposal; for spills in excess of allowable limits
(RQ) notify the National Response Center (800) 424 - 8802; refer to SARA Title III, Section 313 40 CFR 372, and CERCLA 40 CFR 302 for detailed instructions
concerning reporting requirements.
SECTION 6 - HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Keep container closed when not in use; protect containers from abuse; protect from extreme
temperatures, open flames. CAUTION - material is corrosive. This material will support combustion. Keep this and other chemicals out of reach of children.
SECTION 7 - EXPOSURE CONTROLS / PERSONAL PROTECTION
RESPIRATORY PROTECTION (SPECIFY TYPE): None required while threshold limits (Section 2) are kept below maximum allowable concentrations; if TWA
exceeds limits, NIOSH approved respirator must be worn. Refer to 29 CFR 1910.134 or European Standard EN 149 for complete regulations.
VENTILATION LOCAL EXHAUST: Required SPECIAL: To maintain minimum TWA and STEL levels.
MECHANICAL (GENERAL): Yes OTHER: Engineering and work controls as required.
PROTECTIVE GLOVES: Neoprene or rubber gloves with cuffs. EYE PROTECTION: Protective eyeglasses or chemical safety goggles.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Coveralls, apron, or other equipment should be worn to minimize skin contact.
WORK / HYGIENIC PRACTICES: Practice safe workplace habits. Minimize body contact with this, as well as all chemicals in general.
SECTION 8 - PHYSICAL / CHEMICAL PROPERTIES
BOILING POINT SPECIFIC GRAVITY (WATER = 1)
347?F 1.397
VAPOR PRESSURE (MM Hg) pH
<2 Pa @ 68?F ~ 11 (Dispersion, 50% @ 68?F)
VAPOR DENSITY (AIR = 1) EVAPORATION RATE (N-Butyl Acetate = 1)
Not applicable Not applicable
SOLUBILITY IN WATER % VOLATILE (BY WEIGHT)
Negligible 3.46%
APPEARANCE AND ODOR VOLATILE ORGANIC COMPOUNDS (VOC's)
White liquid, characteristic amine odor 0.05 pounds / gallon
SECTION 9 - STABILITY AND REACTIVITY
CONDITIONS TO AVOID: Extreme temperatures, open flames
STABILITY UNSTABLE:
STABLE: X
INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizers, strong acids, strong alkalies
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Decomposition will not occur if handled and stored properly. In case of a fire, oxides of carbon,
hydrocarbons, fumes, and smoke may be produced.
HAZARDOUS POLYMERIZATION MAY OCCUR: CONDITIONS TO AVOID:
WILL NOT OCCUR: X None
SECTION 10 - DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: Dispose of in accordance with Local, State, and Federal Regulations. Refer to "40 CFR Protection of Environment Parts 260 -
299" for complete waste disposal regulations for corrosive and ignitable materials. Consult your local, state, or Federal Environmental Protection Agency
before disposing of any chemicals.
The information contained herein is believed to be accurate but is not warranted to be so. Data and calculations are based on information furnished by the
manufacturer of the product and manufacturers of the components of the product. Users are advised to confirm in advance of need that information is current,
applicable and suited to the circumstances of use. Vendor assumes no responsibility for injury to vendee or third persons proximately caused by the material if
reasonable safety procedures are not adhered to as stipulated in the data sheet. Furthermore, vendor assumes no responsibility for injury caused by abnormal use
of this material even if reasonable safety procedures are followed. Any questions regarding this product should be directed to the manufacturer of the product as
described in Section 1.
MSDS PREPARED BY: CDB, Inc., P.O. Box 395, Intercession City, FL 33848 (863) 644 - 3298 www.compdatabase.com
|