Page 1 of 7
MATERIAL SAFETY DATA SHEET
Date Issued: 05/03/2009
MSDS No: Sikafloor ESD ColorAdd (200,200C,700,340)
Date-Revised: 05/06/2009
Revision No: 2
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT DESCRIPTION: Sikafloor ESD ColorAdd (200,200C,700,340)
PRODUCT CODE: Sikafloor ESD ColorAdd (200, 200C, 700, 340)
MANUFACTURER SUPPLIER
Sika Corporation, Operations Sika Corporation, Construction
www.sikacorp.com www.sikacontruction.com
201 Polito Avenue 201 Polito Avenue
Lyndhurst NJ 07071 Lyndhurst NJ 07071
Service Number: 201-933-8800 Product Stewardship: 201-933-8800
Alternate Customer Service: Fax: 201-804-1076
24 HR. EMERGENCY TELEPHONE NUMBERS
CHEMTREC (US Transportation) :(800) 424 - 9300
CHEMTREC (International) :(703) 527 - 3887
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE: Colored Paste
IMMEDIATE CONCERNS: Flammable liquid and vapor. May cause eye, skin and respiratory tract irritation. Combustible
liquid and vapor.
POTENTIAL HEALTH EFFECTS
EYES: Moderately irritating. May cause tearing, reddening and/or swelling.
SKIN: Moderately irritating. Prolonged or repeated contact may result in defatting and drying of the skin causing skin irritation
and dermatitis. Prolonged skin contact with large amounts of ether acetates may cause drowsiness.
INGESTION: May cause irritation; Symptoms may include abdominal pain, nausea, vomiting, and diarrhea.
INHALATION: Vapors may be irritating to the upper respiratory tract (including the nasal area) and eyes. Prolonged or repeated
exposure to high concentrations may be harmful and cause adverse effects including labored breathing and drowsiness.
REPRODUCTIVE TOXICITY
REPRODUCTIVE EFFECTS: This product contains the following substance know to the State of California to cause adverse
reproductive effects: TOLUENE
ROUTES OF ENTRY: Inhalation, skin absorption, skin contact, eye contact, ingestion.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Page 2 of 7
Sikafloor ESD ColorAdd (200,200C,700,340)
Chemical Name Wt.% CAS EINECS
Propylene glycol monomethyl ether acetate 10 - 60 108-65-6 203-603-9
Titanium dioxide 0 - 20 13463-67-7 236-675-5
Toluene 1 - 10 108-88-3 203-625-9
C.I. Pigments (Various), Non-hazardous 1 - 60 NA N/A
4. FIRST AID MEASURES
EYES: Hold eyelids apart and flush thoroughly with water for 15 minutes
SKIN: Remove contaminated clothing. Wash skin thoroughly for 15 minutes with soap and water.
INGESTION: Do not induce vomiting. Dilute with water. Contact physician.
INHALATION: Remove to fresh air.
ADDITIONAL INFORMATION:
In all cases contact a physician immediately if symptoms persist.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: (75癋) to (85癋) Setaflash CC Tester-ASTM D 3828
AUTOIGNITION TEMPERATURE: Not yet Determined
FLAMMABLE CLASS: Flammable Liquid
EXTINGUISHING MEDIA: Dry Chemical, Foam, Carbon Dioxide (CO2), Water Spray
FIRE FIGHTING PROCEDURES: Containers can build up pressure if exposed to heat (fire). Cool with water spray. As in any
fire, wear self-contained, pressure-demand breathing apparatus (MSHA-NIOSH approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: Absorb with inert material. Clean up and dispose of at an apporiate waste disposal facility.
LARGE SPILL: Construct temporary dikes of dirt, sand, or any appropriate readily available material to prevent spreading of the
material.
Wearing the appropriate personal protective equipment designated in Section 8, close or cap valves and/or block or plug hole in
leaking container and transfer to another container.
Contain material as described above and call the local fire or police department for immediate emergency assistance.
7. HANDLING AND STORAGE
HANDLING:
Keep away from heat, sparks, sunlight, electrical equipment or flame. VAPORS MAY IGNITE AND EXPLODE. DO
NOT SMOKE. Open doors and windows during use. Use adequate local and mechanical ventilation. Wear protective
equipment (chemically resistant gloves/goggles/clothing) to prevent direct contact with skin and eyes. Use properly fitted
NIOSH vapor cartridge respirator if ventilation is poor. Wash thoroughly with soap and water after use. Remove
contaminated clothing after use. Store product in tightly sealed containers in a cool, dry well ventilated area away from
ignition sources.
Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use non-sparking tools. Take precautionary
measures against electrostatic discharges.
Page 3 of 7
Sikafloor ESD ColorAdd (200,200C,700,340)
To avoid fire or explosion, dissipate static electricity during transfer by grounding and bonding containers and equipment before
transferring material.
STORAGE: Store is a cool, dry place. Keep container closed when not in use.
COMMENTS: If bulging of container occurs, transfer to a well ventilated area and open carefully to relieve pressure then reseal.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV SupplierOEL
mg/m3 mg/m3 mg/m3
Chemical Name ppm ppm ppm
[1] [1] [1] [1] [1] [1]
TWA N.E. N.E. N.E. N.E. N.E. N.E.
Propylene glycol monomethyl ether acetate
STEL N.E. N.E. N.E. N.E. N.E. N.E.
15
[1]
TWA N.E. N.E. 10 mg/m3 N.E. N.E.
mg/m3 [1]
Titanium dioxide
STEL N.E. N.E. N.E. N.E. N.E. N.E.
375 S 50 188
TWA 100 ppm NL NL
ppm [2] mg/m3 [2]
mg/m3
Toluene
560 NL
STEL 150 ppm NL ppm NL NL
mg/m3 mg/m3
OSHA TABLE COMMENTS:
1. N.E. = None Established
2. S = Skin
ENGINEERING CONTROLS: Good industrial hygiene practice dictates that worker protection should be achieved through
engineering controls, such as ventilation, whenever feasible. When such controls are not feasible to achieve full protection, the use
of respirators and other personal protective equipment is mandated. Exhaust air may need to be cleaned by scrubbers or filters to
reduce environmental contamination.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: When handling liquid product, chemical goggles should be worn. Chemical safety goggles in combination
with a full face shield if a splash hazard exists.
SKIN: To prevent any contact, wear impervious compatible chemical resistant protective clothing such as neoprene or butyl
rubber gloves, apron, boots or whole bodysuit, as appropriate.
RESPIRATORY: Seek professional advice prior to respirator selection and use. Follow OSHA respirator regulations (29 CFR
1910.134) and, if necessary, wear an OSHA/NIOSH-approved respirator. Select respirator based on its suitability to provide
adequate worker protection for given working conditions, level of airborne contamination, and presence of sufficient oxygen.
PROTECTIVE CLOTHING: Wear compatible chemical resistant protective aprons and gauntlets to prevent prolonged or
repeated skin exposure.
WORK HYGIENIC PRACTICES: Good personal hygiene practices should always be followed.
COMMENTS: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using this material, especially before
eating, drinking, smoking, using the toilet, or applying cosmetics.
9. PHYSICAL AND CHEMICAL PROPERTIES
ODOR: Sweet ether-like odor
Page 4 of 7
Sikafloor ESD ColorAdd (200,200C,700,340)
APPEARANCE: Thick paste
VAPOR PRESSURE: Not Available
VAPOR DENSITY: Heavier than air
FLASHPOINT AND METHOD: (75癋) to (85癋) Setaflash CC Tester-ASTM D 3828
EVAPORATION RATE: Is slower than Butyl Acetate
10. STABILITY AND REACTIVITY
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
CONDITIONS TO AVOID: Avoid high temperatures and sources of ignition.
HAZARDOUS DECOMPOSITION PRODUCTS: Not Applicable
INCOMPATIBLE MATERIALS: Oxidizing agents
11. TOXICOLOGICAL INFORMATION
ACUTE
ORAL LD50 DERMAL LD50 INHALATION
Chemical Name
(rat) (rabbit) LC50 (rat)
Propylene glycol monomethyl ether acetate 8532 mg/Kg > 5000 mg/kg > 5322 ppm/4h
CARCINOGENICITY
NTP IARC OSHA
Chemical Name
Status Status Status
Propylene glycol monomethyl ether acetate Not Listed Not Listed Not Listed
Titanium dioxide 3
IARC: Not listed by IARC
NTP: Not listed by NTP
OSHA: Not listed by OSHA
REPRODUCTIVE EFFECTS: This product contains the following substance know to the State of California to cause adverse
reproductive effects: Toluene
COMMENTS: To the best of our knowledge, the chemical, physical and toxicological properties have not been thoroughly
investigated.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: No data is available on the product itself.
COMMENTS: No environmental data available for this product.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Waste must be disposed of in accordance with federal, state and local regulations. Incineration is the
preferred method. Empty containers must be handled with care due to the product residue. To meet regulatory cirteria, the
Page 5 of 7
Sikafloor ESD ColorAdd (200,200C,700,340)
container is considered empty when less than 3% remains in the container. Additional special handling is not typically required
and the empty container can be discarded with other non-hazardous waste.
FOR LARGE SPILLS:
In case of spill, eliminate all ignition and heat sources. Ventilate area. Open doors and windows. Wear chemical resistant
gloves/goggles/clothing. In absence of proper ventilation use properly fitted NIOSH respirator. Confine spill, collect using
noncombustible absorbent material and place in properly sealed container. Dispose of excess product in accordance with
applicable local, state and federal regulations.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME: Paint
PRIMARY HAZARD CLASS/DIVISION: 3
UN/NA NUMBER: 1263
PACKING GROUP: III
NAERG: 128
AIR (ICAO/IATA)
SHIPPING NAME: Paint
UN/NA NUMBER: 1263
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: III
VESSEL (IMO/IMDG)
SHIPPING NAME: Paint
UN/NA NUMBER: 1263
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: III
CANADA TRANSPORT OF DANGEROUS GOODS
SHIPPING NAME: Paint
UN/NA NUMBER: 1263
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: III
CANUTEC GUIDE: 128
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
FIRE: Yes PRESSURE GENERATING: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
EPCRA SECTION 313 SUPPLIER NOTIFICATION
Chemical Name Wt.% CAS
Toluene 1 - 10 108-88-3
TSCA (TOXIC SUBSTANCE CONTROL ACT)
Page 6 of 7
Sikafloor ESD ColorAdd (200,200C,700,340)
Chemical Name CAS
Toluene 108-88-3
TSCA REGULATORY: This product, or its components, are listed on or are exempt from the Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
CANADA
DOMESTIC SUBSTANCE LIST (INVENTORY): This product and/or its components are listed on DSL.
INTERNATIONAL REGULATIONS:
EINECS Inventory Status:
This product, or its components, are listed on or are exempt from the European Inventory of Existing Chemical Substances
(EINECS) or the European List of Notified Chemical Substances (ELINCS).
Canadian Inventory Status:
This product, or its components, are listed on or are exempt from the Canadian Domestic Substance List (DSL).
Australian Inventory Status:
This product, or its components, are listed on or are exempt from the Australian Inventory of Chemical Substances (AICS).
GENERAL COMMENTS:
EU Risk and Safety Phrases:
Symbol of Danger: F(Flammable),Xi(Irritant), Xn(Harmful)
R 20/21 Harmful by inhalation and in contact with skin.
R 10 Flammable
R 36/38 Irritating to eyes and skin.
R 65 Harmful: may cause lung damage if swallowed.
S 2 Keep out of reach of children.
S 23 Do not breathe fumes/vapor/spray.
S 24/25 Avoid contact with skin and eyes.
S 62 If swallowed, do not induce vomiting: seek medical advice immediately and show the container label.
16. OTHER INFORMATION
TITLE: MSDS Coordinator
REVISION SUMMARY: Revision #: 2. This MSDS replaces the May 03, 2009 MSDS., , Any changes in information are as
follows: In Section 4: Firstaid - Eyes, Firstaid - Skin, Firstaid - Ingestion, Firstaid - Inhalation, Additional InformationIn Section 7:
HandlingIn Section 13: For Large Spills
HMIS RATING
* 2
HEALTH:
3
FLAMMABILITY:
0
PHYSICAL HAZARD:
G
PERSONAL PROTECTION:
MANUFACTURER DISCLAIMER: The information contained in this Material Safety Data Sheet applies only to the actual Sika
Corporation ("Sika") product identified and described herein. This information is not intended to address, nor does it address the
use or application of the identified Sika product in combination with any other material, product or process. All of the information
set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof.
Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current
Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or
telephone number listed in Section 1 of this MSDS.
Page 7 of 7
Sikafloor ESD ColorAdd (200,200C,700,340)
SIKA MAKES NO WARRANTIES EXPRESSED OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER
TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikscorp.com or 201-933-8800.
|