MATERIAL SAFETY DATA SHEET
INNERBOND 412 PAINTER'S CAULK
SECTION I ?PRODUCT AND COMPANY IDENTIFICATION
August 31, 2007
DATE:
INLAND, INC.
MANUFACTURER'S NAME:
P. O. BOX 644 (42702)
ADDRESS:
209 PETERSON DRIVE
ELIZABETHTOWN, KY 42701
270-737-6757
TELEPHONE NUMBER:
CHEMTREC 800-424-9300
EMERGENCY CONTACT:
NFPA = NATIONAL FIRE PROTECTION ASSOCIATION
1 0 0
HEALTH (NFPA): FLAMMABILITY (NFPA): REACTIVITY (NFPA):
MIXTURE
CAS NO:
NOT USED
INLAND, INC. WARNING CODE:
SEALANT
GENERIC DESCRIPTION:
SECTION II - HAZARDOUS COMPONENTS
CAS Number Substance Wt. %
85-68-7 Butyl benzyl phthalate 5.0 ?10.0
107-21-1 1,2 Ethanediol 1.0 ?5.0
8052-41-3 Stoddard solvent 1.0 ?5.0
The above components are hazardous as defined in 29 CFR 1910.1200.
SECTION III ?HAZARDS IDENTIFICATION
Ingestion:
May be harmful if swallowed. May cause kidney damage. May cause irritation of the mouth, throat and
stomach. May cause headache, dizziness, nausea, vomiting, and central nervous system depression.
Skin:
May be absorbed through the skin and produce effects as listed under "Ingestion". May cause irritation and
reddening of the skin.
Inhalation:
Vapor overexposure may cause headache, dizziness, tiredness, nausea and vomiting. May irritate mucous
membranes and respiratory tract with coughing and shortness of breath.
Eyes:
Contact can cause severe irritation and redness with swelling.
Medical Conditions Aggravated:
Central nervous system disorders. Pre-existing skin or respiratory diseases. Kidney disorders
Subchronic (Target Organ):
Respiratory system. Kidney. Central nervous system
Chronic Effects / Carcinogenicity:
This product and its ingredients (present at 0.1% or more) are not listed as a carcinogen or suspected
carcinogen by NTP, IARC, or OSHA.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
INNERBOND 412 PAINTER'S CAULK
SECTION IV - FIRST AID MEASURES
Ingestion:
Immediate medical attention is required. Do not induce vomiting. If victim is conscious, give 2 ?4 glasses of
water.
Skin:
Wipe off and wash with soap and water. Remove and wash contaminated clothing before re-use. Get medical
attention if irritation or symptoms from Section III develop. Flush skin with large amounts of water for at least 15
minutes until no evidence of chemical remains.
Inhalation:
Remove to fresh air. Get medical attention if irritation or symptoms from Section III develop. If not breathing,
begin artificial respiration using a barrier device. Because of chemical properties, do not use mouth-to-mouth
contact.
Eyes:
Flush with water for 15 minutes. Get medical attention.
SECTION V - FIRE FIGHTING MEASURES
Unknown
Flash Point (Method Used):
Unknown
Ignition Temperature:
Unknown
Flammability Limits in Air:
No
Sensitivity to Mechanical Impact:
Not expected
Sensitivity to Static Discharge:
All standard firefighting media
Extinguishing Media:
NIOSH/MSHA approved positive pressure self-contained breathing
Special Fire Fighting Procedures:
apparatus with full face mask and full protective clothing should be
worn in fighting fires involving chemicals.
None
Unusual Fire and Explosion Hazards:
SECTION VI - ACCIDENTAL RELEASE MEASURES
Use all personal protection equipment recommendations described in protective
Containment/Clean up:
equipment section. Wipe, scrape or soak up spilled material with an inert material
and put in a container for disposal. Wash walking surfaces with detergent and
water to reduce slipping hazard. Keep spills away from sewers and open bodies of
water. Dispose of saturated cleaning materials and spilled product in accordance
with local and federal regulations.
SECTION VII - HANDLING AND STORAGE
Avoid contact with skin and eyes. Remove and wash contaminated clothing before re-use. Keep away from
children. Keep container tightly closed. Keep container dry. Do not inhale vapors. Avoid accidental ingestion.
Wash hands and face before eating, drinking, smoking, using toilet facilities or applying cosmetics. Store
between 40癋 and 120癋. Product releases formaldehyde during curing.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
INNERBOND 412 PAINTER'S CAULK
SECTION VIII - EXPOSURE CONTROLS AND PERSONAL PROTECTION
If exposure limits are exceeded or if respiratory irritation is experienced, appropriate
Respiratory Protection:
respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR
1910.134) and use NIOSH/MSHA approved respirators. Supplied air respirators
may be required for non-routine or emergency situations.
Neoprene
Hand Protection:
Safety glasses with side shields
Eye Protection:
Wash hands and face before eating, drinking, smoking, using toilet facilities or
Skin Protection:
applying cosmetics. Contaminated clothing and shoes should be removed as soon
as practical and thoroughly cleaned before reuse. Wear suitable protective clothing.
EXPOSURE GUIDELINES:
CAS Number Substance Source Value
107-21-1 1,2 Ethanediol ACGIH, Ceiling Aerosol. 100 mg/m?br>
8052-41-3 Stoddard Solvent ACGIH, TWA 100 ppm
8052-41-3 Stoddard Solvent OSHA Z1, PEL 500 ppm, 2,900 mg/m?br>
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
Solid
Physical Form:
Trace Ammonia
Odor:
100癈; 212癋
Boiling Point (at 760 MM HG):
1.61
Specific Gravity (at 77癋/25癈):
Unknown
Melting Point:
Unknown
Vapor Pressure (at 77癋/25癈):
No data available
Vapor Density (Air = 1 at 77癋/25癈):
Unknown
Freezing Point:
Unknown
Melting Point:
Unknown
Density (KG/M3):
Ca. 8.0
pH
Unknown
Acid / Alkalinity (MEQ/G)
34.20%(m)
Volatile Organic Content (VOL)
60.90
VOC Excl H2O & Exempts (G/L)
Unknown
Evaporation Rate (Butyl Acetate = 1):
Soluble
Solubility in Water:
The above information is not intended for use in preparing product specifications.
SECTION X ?STABILITY AND REACTIVITY
Chemical Stability:
Stable
Hazardous Polymerization:
Will not occur
Hazardous Thermal Decomposition / Combustion Products:
Carbon dioxide (CO2), Carbon Monoxide, Oxides of nitrogen, Toxic monomer fumes
Conditions to Avoid:
None known
Incompatibility (Materials to Avoid):
None known
Page 3 of 5
MATERIAL SAFETY DATA SHEET
INNERBOND 412 PAINTER'S CAULK
SECTION XI ?TOXICOLOGICAL INFORMATION
No known applicable information.
SECTION XII ?ECOLOGICAL INFORMATION
No known applicable information.
SECTION XIII ?DISPOSAL CONSIDERATION
Disposal should be made in accordance with federal, state and local regulations.
SECTION XIV ?TRANSPORT INFORMATION
Not regulated
US DOT & Canada TDG Surface:
Not regulated
Transport by sea IMDG-Code:
Not regulated
Air transport ICAO-TI/IATA-DGR:
SECTION XV ?REGULATORY INFORMATION
FEDERAL REGULATIONS:
TSCA inventory status and TSCA information:
All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of
Chemical Substances.
TSCA 12 (b) Export Notification:
This material does not contain any TSCA 12 (b) regulated chemicals.
CERCLA Regulated Chemicals:
This material does not contain any CERCLA Regulated Chemicals.
SARA 302 EHS Chemicals:
This material does not contain any SARA extremely hazardous substances.
SARA 311/312 Hazard Class:
Immediate (acute) health hazard. Chronic health hazard
SARA 313 Chemicals:
50-00-0 Formaldehyde, 79-06-1 Acrylamide, 108-05-4 Vinyl Acetate
HAPS:
This material does not contain any hazardous air pollutants.
U.S. STATE REGULATIONS:
California Proposition 65 Carcinogens:
This material contains chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm.
140-88-5 Ethyl Acrylate
7439-92-1 Lead
75-07-0 Acetaldehyde
79-06-1 2 - Propenamide
50-00-0 Formaldehyde
7440-38-2 Arsenic
Page 4 of 5
MATERIAL SAFETY DATA SHEET
INNERBOND 412 PAINTER'S CAULK
SECTION XVI ?OTHER INFORMATION
This data is offered in good faith as typical values and not as a product specification. No warranty, either
expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review these recommendations in the specific
context of the intended use and determine whether they are appropriate.
Page 5 of 5
|