Material Safety Data Sheet
Revision Date: 05/21/2007 Issue date: 05/21/2007
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product name: Item No. : 36331
363(TM) Impruv Potting Compound Light Cure
Adhesive UV Curing
Product type: Sealant Region: United States
Company address: Contact Information:
Henkel Corporation Telephone: 860.571.5100
1001 Trout Brook Crossing Emergency telephone: 860.571.5100
Rocky Hill, Connecticut 06067 Internet: www.loctite.com
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components % ACGIH TLV OSHA PEL OTHER
High boiling methacrylate 30-60 None None None
68586-19-6
Polyurethane methacrylate resin 30-60 None None None
PROPRIETARY
Acrylic acid 5-10 2 ppm TWA 10 ppm TWA; 30 mg/m? 1 ppm TWA (skin); 3 ppm
79-10-7 (skin) STEL (skin)
Hydroxyalkyl methacrylate 1-5 None None 3 ppm (ceiling)
868-77-9
Photoinitiator 1-5 None None None
947-19-3
gamma-Glycidoxypropyl 1-5 None None None
trimethoxysilane
2530-83-8
100 mg/m3 Ceiling
Ethylene glycol 0.1-1 None None
107-21-1
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
HMIS:
Physical state: Liquid HEALTH: 2*
Color: Yellow FLAMMABILITY: 1
Odor: Sharp, Irritating PHYSICAL HAZARD: 1
Personal Protection: See Section 8
WARNING: CAUSES EYE AND SKIN IRRITATION.
MAY CAUSE ALLERGIC SKIN REACTION.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
MAY BE HARMFUL IF SWALLOWED OR INHALED.
Relevant routes of exposure: Skin, Inhalation, Eyes
Potential Health Effects
Item No. : 36331 Product name: 363(TM) Impruv Potting Compound Light Cure Adhesive UV
Curing
1 of 5
Inhalation: May cause irritation to nose and throat.
Skin contact: Irritating to skin. May cause allergic skin reaction.
Eye contact: Vapors may irritate eyes. Contact with eyes will cause irritation.
Ingestion: May be harmful if swallowed. May cause gastrointestinal tract irritation if swallowed.
Existing conditions aggravated by Skin disorders. Eye disorders. Acrylic acid: Respiratory disorders. Lung disease.
exposure:
See Section 11 for additional toxicological information.
4. FIRST AID MEASURES
Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.
Skin contact: Wash with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse.
Get medical attention if symptoms occur.
Eye contact: Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding
eyelids open all the time. Get medical attention.
Ingestion: Do not induce vomiting. Keep individual calm. Obtain medical attention.
5. FIRE-FIGHTING MEASURES
Flash point: Greater than 93篊 (200篎) Tagliabue closed cup
Autoignition temperature: Not available
Flammable/Explosive limits-lower %: 2.0 % (Acrylic Acid)
Flammable/Explosive limits-upper %: 8.0 % (Acrylic Acid)
Extinguishing media: Foam, dry chemical or carbon dioxide.
Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Unusual fire or explosion hazards: None
Hazardous combustion products: Oxides of carbon. Irritating organic vapors.
6. ACCIDENTAL RELEASE MEASURES
Environmental precautions: Prevent product from entering drains or open waters.
Clean-up methods: Ensure adequate ventilation. Soak up with inert absorbent. Store in a partly filled, closed container until
disposal.
7. HANDLING AND STORAGE
Handling: Avoid contact with eyes, skin and clothing. Avoid breathing vapor and mist. Wash thoroughly after
handling.
Storage: For safe storage, store at or below 38癈 (100癋). Keep in a cool, well ventilated area away from heat,
sparks and open flame. Keep container tightly closed until ready for use.
Incompatible products: Refer to Section 10.
For information on product shelf life contact Henkel Customer Service at (800) 243-4874.
Item No. : 36331 Product name: 363(TM) Impruv Potting Compound Light Cure Adhesive UV
Curing
2 of 5
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Use local exhaust ventilation to maintain airborne concentrations below established exposure limits.
Respiratory protection: Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact.
Eye/face protection: Safety goggles or safety glasses with side shields.
See Section 2 for exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Liquid
Color: Yellow
Odor: Sharp, Irritating
Vapor pressure: Less than 5 mm Hg at 27篊 (80篎)
pH: Not applicable
Boiling point/range: Greater than 149篊 (300篎)
Melting point/range: Not available
Specific gravity: 1.1 at 26.6篊 (80篎)
Vapor density: Not available
Evaporation rate: Not available
Solubility in water: Slight
Partition coefficient (n-octanol/water): Not available
VOC content: ASTM D5403 Process volatiles 2.14 %, 23.54 grams/liter; Potential volatiles 0.78 %, 8.58 grams/liter;
Total volatiles 2.92 %, 32.12 grams/liter.
10. STABILITY AND REACTIVITY
Stability: Stable.
Hazardous polymerization: Will not occur.
Hazardous decomposition products: Oxides of carbon. Oxides of silicon. Irritating organic vapors.
Incompatability: Strong oxidizers. Reducing agents. Acids. Bases. Alkalis. Aldehydes. Amines. Free radical initiators.
Peroxides.
Conditions to avoid: Exposure to sunlight. Heat, flames and sparks. See "Handling and Storage" (Section 7) and
"Incompatabilty" (Section 10).
11. TOXICOLOGICAL INFORMATION
Product toxicity data: Acute LD50 (oral): 5000 (rat). (estimated). Acute dermal LD50 greater than 2000 mg/kg (rabbit)
(estimated).
Carcinogen Status
Item No. : 36331 Product name: 363(TM) Impruv Potting Compound Light Cure Adhesive UV
Curing
3 of 5
Hazardous components NTP Carcinogen IARC Carcinogen OSHA Carcinogen
High boiling methacrylate No No No
68586-19-6
Polyurethane methacrylate resin No No No
PROPRIETARY
Acrylic acid No No No
79-10-7
Hydroxyalkyl methacrylate No No No
868-77-9
Photoinitiator No No No
947-19-3
gamma-Glycidoxypropyl No No No
trimethoxysilane
2530-83-8
Ethylene glycol No No No
107-21-1
Literature Referenced Target Organ & Other Health Effects
Hazardous components Health Effects/Target Organs
High boiling methacrylate Allergen, Irritant
68586-19-6
Polyurethane methacrylate resin Allergen, Irritant
PROPRIETARY
Acrylic acid Allergen, Corrosive, Irritant, Kidney, Liver
79-10-7
Hydroxyalkyl methacrylate Allergen, Irritant
868-77-9
Photoinitiator No data
947-19-3
gamma-Glycidoxypropyl Allergen, Irritant
trimethoxysilane
2530-83-8
Ethylene glycol Blood, Bone Marrow, Central nervous system, Developmental, Eyes, Irritant, Kidney, Liver, Metabolic
107-21-1
12. ECOLOGICAL INFORMATION
Ecological information: Not available
13. DISPOSAL CONSIDERATIONS
Information provided is for unused product only.
Recommended method of disposal: Dispose of according to Federal, State and local governmental regulations.
EPA hazardous waste number: Not a RCRA hazardous waste.
14. TRANSPORT INFORMATION
U.S. Department of Transportation Ground (49 CFR):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
International Air Transportation (ICAO/IATA):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
WaterTransportation (IMO/IMDG):
Item No. : 36331 Product name: 363(TM) Impruv Potting Compound Light Cure Adhesive UV
Curing
4 of 5
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
Marine pollutant: None
15. REGULATORY INFORMATION
United States Regulatory Information
TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.
TSCA 12 (b) Export Notification: None.
CERCLA/SARA Section 302 EHS: None above reporting de minimus.
CERCLA/SARA Section 311/312: Immediate Health Hazard, Delayed Health Hazard
CERCLA/SARA 313: This product contains the following toxic chemicals subject to the reporting requirements of section 313
of the Emergency Planning and Community Right-To-Know Act of 1986 (40 CFR 372). Acrylic acid
(CAS# 79-10-7).
California Proposition 65: This product contains a chemical known to the State of California to cause cancer.
Canada Regulatory Information
CEPA DSL/NDSL Status: One or more components are not listed on, and are not exempt from listing on either the Domestic
Substances List or the Non-Domestic Substances List.
WHMIS hazard class: D.2.A, D.2.B
16. OTHER INFORMATION
This material safety data sheet contains changes from the previous version in sections: 2, 11, 15
Prepared by: Kyra Kozak Woods, Manager, Regulatory Affairs
DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation
does not assume responsibility for any results obtained by persons over whose methods Henkel Corporation has no control. It is the
user's responsibility to determine the suitability of Henkel's products or any production methods mentioned herein for a particular
purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be
involved in the handling and use of any of Henkel Corporation's products. In light of the foregoing, Henkel Corporation specifically
disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale
or use of Henkel Corporation's products. Henkel Corporation further disclaims any liability for consequential or incidental damages of
any kind, including lost profits.
Item No. : 36331 Product name: 363(TM) Impruv Potting Compound Light Cure Adhesive UV
Curing
5 of 5
|