Page 1 / 5
SAFETY DATA SHEET
MIRANOL KORISTEMAALI (Decoration Paint gold, copper, silver)
Date 30.5.2008 Previous date: 22.5.2006
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/
UNDERTAKING
1.1 Identification of the article
1.1.1 Commercial Product Name
MIRANOL KORISTEMAALI (Decoration Paint gold, copper, silver)
1.1.2 Product code
006 7700 - 7702
1.2 Use of the Substance/Preparation
1.2.1 Intended use
Painting work.
Description: A solvent-borne enamel paint for interior decoration painting
1.3 Identification of the company
1.3.1 Supplier
Tikkurila Oy
1.3.2 Contact information:
P.O.Box P.O.Box 53
Postcode and post office FI-01301 VANTAA
FINLAND
Telephone +358 9 857 71
Telefax +358 9 8577 6936
1.3.4 Responsible for the Safety Data Sheet:
Tikkurila Oy, Product Safety, e-mail: productsafety@tikkurila.com
1.4 Emergency telephone number
1.4.1 Telephone number, name and address
Tikkurila Oy, Environment and Safety: +358 9 857 71
2. HAZARDS IDENTIFICATION
Flammable.
Dangerous for the environment, N.
Vapours may cause drowsiness and dizziness. Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Information on hazard labelling in section 15.1.
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Hazardous components
3.1.1 3.1.2 3.1.3 3.1.4
CAS number EINECS Chemical name of the Concentration Classification
substance
Naphtha, hydrodesulfurized 40 - 70 % Xn, N; R10-65-66-67-51/53
64742-82-1 265-185-4
heavy
Naphtha, hydrotreated heavy 1 - 5 % Xn; R10-65-66
64742-48-9 265-150-3
(aliphatic hydrocarbon solvent)
Isobutylmethacrylate < 0,5 % Xi, N; R10-36/37/38-43-50
97-86-9 202-613-0
Zinc powder (stabilized) 0-5% N; R10-15-50/53
7440-66-6 231-175-3
Aluminium powder (stabilized) 0 - 15 % F; R10-15
7429-90-5 231-072-3
Solvent naphtha, light <1% Xn, N; R10-37-65-66-67-51/53
64742-95-6 265-199-0
aromatic
4. FIRST AID MEASURES
Page 2 / 5
SAFETY DATA SHEET
MIRANOL KORISTEMAALI (Decoration Paint gold, copper, silver)
Date 30.5.2008 Previous date: 22.5.2006
4.1 Additional advice
In all cases of doubt, or when symptoms persist, seek medical attention.
4.2 Inhalation
Remove to fresh air, keep patient warm and at rest.
4.3 Skin contact
Remove contaminated clothing. Wash skin throughly with soap and water or use recognized skin cleanser.
4.4 Eye contact
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart and seek medical
advice.
4.5 Ingestion
If accidentally swallowed obtain immediate medical attention. Keep at rest. DO NOT induce vomiting.
5. FIRE-FIGHTING MEASURES
5.1 Suitable extinguishing media
Use foam, CO2, powder or water spray.
5.2 Extinguishing media which must not be used for safety reasons
Waterjet
5.3 Specific hazards
Fire will produce dense black smoke, which contains decomposition products. Avoid breathing the smoke.
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions
Avoid breathing vapours. Exclude sources of ignition.
6.2 Environmental precautions
Do not allow to enter drains or water courses.
6.3 Methods for cleaning up
Contain and collect spillage with non-combustible absorbent materials, e.g. sand or vermiculite and place in a
container for disposal according to local regulations. Clean preferably with a detergent; avoid the use of
solvents. Note! Products containing oxidative drying oil or alkyd (linseed oil varnish, alkyd paints and -
lacquers) have a possibility of auto-ignition in porous materials damped by the product. This kind of waste
must be collected and stored e.g. in water before disposal or incinerated immediately.
7. HANDLING AND STORAGE
7.1 Handling
Vapours are heavier than air and may form explosive mixtures with air. Good ventilation must be provided.
Keep away from sources of ignition. Take precautionary measures against static discharges.
7.2 Storage
Keep containers tightly closed. Store in a cool, dry, well ventilated place away from sources of heat and direct
sunlight.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
8.2 Exposure controls
8.2.1 Occupational exposure controls
Provide adequate ventilation. Comply with the health and safety at work laws.
8.2.1.1 Respiratory protection
Use appropriate certified respirators, with gas and vapour filter A, during sanding with dust filter P2, if
ventilation is insufficient. During spray-application use respirators with gas, vapour and dust filter AP. During
continuous and long-term work the use of air-fed or motor-driven respirators is recommended.
Page 3 / 5
SAFETY DATA SHEET
MIRANOL KORISTEMAALI (Decoration Paint gold, copper, silver)
Date 30.5.2008 Previous date: 22.5.2006
8.2.1.2 Hand protection
Always wear protective gloves (e.g. nitrile rubber). Barrier creams may also help to protect the exposed areas
of the skin.
8.2.1.3 Eye protection
Safety eyewear must be used, specially during spray-application.
8.2.1.4 Skin and body protection
Protective clothing must be used during spray-application.
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 General Information (appearance, odour)
Coloured, viscous liquid, strong odour.
9.2 Important Health Safety and Environmental Information
140 - 200 癈 *)
9.2.2 Boiling point/range
33 癈 *)
9.2.3 Flash point
9.2.5 Explosive properties
9.2.5.1 Lower explosion limit 1,0 vol-% *)
6,0 vol-% *)
9.2.5.2 Upper explosion limit
12,8 kPa (60 癈) *)
9.2.7 Vapour pressure
0,9 - 1,2
9.2.8 Relative density
9.2.9 Solubility
Insoluble
9.2.9.1 Water solubility
flow time more than 30 sec / ISO 3 mm cup
9.2.11 Viscosity
9.3 Other data
Evaporation rate (BuAc=1) : 0,15 *)
*) = Naphtha, hydrodesulfurized heavy
10. STABILITY AND REACTIVITY
10.1 Conditions to avoid
Solvent vapours may form explosive mixtures with air.
10.2 Materials to avoid
Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic
reactions.
10.3 Hazardous decomposition products
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
11. TOXICOLOGICAL INFORMATION
11.1 Acute toxicity
See section 11.5.
11.2 Primary irritation
See section 11.5.
11.3 Sensitisation
Contains isobytyl methacrylate. May produce an allergic reaction.
11.5 Human experience
11.5.1 Inhalation: Solvent vapours and spray mist harmful if inhaled. Long term exposure to component
solvent vapours concentration in excess of the stated occupational exposure limit may result in adverse health
effect such as mucous membrane and respiratory system irritation and adverse effect on kidney, liver and
central nervous system. Symptoms and signs include headache and dizziness.
11.5.2 Skin contact: Repeated or prolonged contact with the preparation may cause removal of the natural fat
from the skin resulting in contact dermatitis. Splashes in the eyes may cause irritation.
11.5.3 Other effects: Harmful if taken internally.
Page 4 / 5
SAFETY DATA SHEET
MIRANOL KORISTEMAALI (Decoration Paint gold, copper, silver)
Date 30.5.2008 Previous date: 22.5.2006
12. ECOLOGICAL INFORMATION
12.1 Ecotoxicity
12.1.1 Aquatic toxicity
Naphtha, hydrodesulfurized heavy: LC50 = 1-100 mg/l (estimate); toxic
Zinc: LC50 = 0,8 mg/l, oncorhynchus mykiss, 96 h; very toxic. LC50 = 0,16 mg/l, daphnia magna, 48 h; very
toxic.
12.3 Persistence and degradability
12.3.1 Biodegradation
Naphtha, hydrodesulfurized heavy: 75 %, 28 d; readily biodegradable
12.4 Bioaccumulative potential
Naphtha, hydrodesulfurized heavy: octanol/water partition coefficient log Kow = 2-7
12.6 Other adverse effects
There is no data available on the preparation itself. The product should not be allowed to enter drains or water
courses.
13. DISPOSAL CONSIDERATIONS
13.1 Product residues: Gather residues into waste containers. Destroy according to the rules given by local
authorities. EWC-code for liquid waste is e.g 08 01 11 (waste paint and varnish containing organic solvents or
other dangerous substances).
13.2 Packaging waste: Empty cans should be recycled or disposed of in accordance with local regulations.
14. TRANSPORT INFORMATION
1263
14.1 UN No
III
14.2 Packing group
14.3 Land transport
3
14.3.1 ADR/RID Class
paint
14.3.3 Description of the goods
14.4 Sea transport
3
14.4.1 IMDG Class
paint
14.4.2 Proper shipping name
EmS: F-E, S-E
14.4.3 Further Information
14.5 Air transport
3
14.5.1 ICAO/IATA Class
paint
14.5.2 Proper shipping name
15. REGULATORY INFORMATION
15.1 Information on the warning label
15.1.1 Letter code of the warning symbol and indications of danger for the preparation
N Dangerous for the environment
15.1.2 Names of the ingredients given on the warning label
Naphtha, hydrodesulfurized heavy
15.1.3 R-phrase(s)
Flammable.
R10
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
R51/53
environment.
Vapours may cause drowsiness and dizziness.
R67
15.1.4 S-phrase(s)
Page 5 / 5
SAFETY DATA SHEET
MIRANOL KORISTEMAALI (Decoration Paint gold, copper, silver)
Date 30.5.2008 Previous date: 22.5.2006
Keep out of the reach of children.
S2
Do not breathe vapour/spray.
S23
Do not empty into drains.
S29
If swallowed, seek medical advice immediately and show this container or label.
S46
Use only in well-ventilated areas.
S51
Avoid release to the environment. Refer to special instructions/safety data sheets.
S61
15.1.5 Special regulations on certain preparations
Contains isobytyl methacrylate. May produce an allergic reaction.
16. OTHER INFORMATION
16.1 Full text of R-phrases referred to under sections 2 and 3
Irritating to respiratory system.
R37
Flammable.
R10
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
R51/53
environment.
Vapours may cause drowsiness and dizziness.
R67
Contact with water liberates extremely flammable gases.
R15
Irritating to eyes, respiratory system and skin.
R36/37/38
May cause sensitization by skin contact.
R43
Very toxic to aquatic organisms.
R50
Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
R50/53
environment.
Harmful: may cause lung damage if swallowed.
R65
Repeated exposure may cause skin dryness or cracking.
R66
16.4 Additional information
The information of this MSDS is based on the present state of our knowledge and on current EC laws. It is
meant as a description of the safety requirements of our product: it is not to be considered as a guarantee of
the products' properties.
Additional information available from: Tikkurila Oy, Product Safety, P.O. Box 53, FIN-01301 VANTAA,
FINLAND, Telephone +358 9 857 71, Fax +358 9 8577 6936, E-mail: productsafety@tikkurila.com
a/akk
Signature
|