==========================================================================
MATERIAL SAFE DATA SHEET
Effective Date: November 3, 2004 Code: BRAKE LINING MATERIAL
==========================================================================
==========================================================================
SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION
==========================================================================
PRODUCT NAME: ASBESTOS FREE CERAMIC DISC BRAKE LINING MATERIAL
IDENTIFY BY EDGE CODE: SS-4400-FG
MANUFACTURER'S NAME:
TRW Automotive Espana S.L. Telephone: 34 948 780 535
Poligono Ombatillo, s/n Fax: 34 948 780 629
31591 - Corella (Navarra) - Espana Emergency: 34 948 780 535
SUPPLIER'S NAME:
Rayloc
Division of Genuine Parts Company
600 Rayloc Drive SW
Atlanta, GA 30336"
REVISION DATE:
June 29, 2007
==========================================================================
SECTION 2: COMPOSITION
==========================================================================
Although several of the ingredients used to formulate this product may be
hazardous in their raw state, the manufacturing process results in a solid,
infusible product presenting an inert character.
Components CAS % TLV-TWA / (ACGIH)
Number
Aluminum/Iron 7439-89-6 <30 - -
/Magnesium
Silicate Barium 231-784-4 <20 10 mg/m3 / Note (a) (b)
Sulfate
Magnesium Oxide 1309-48-8 <10 10 mg/m3 / Note (a)
Copper Sulfide 1309-36-0 <10 1 mg/m3 / Note (a) (c)
Iron/Stein Sulfide 7439-89-6 <10 2 mg/m3 / Note (a) (c)
Ghaphite 14808-60-7 <10 2 mg/m3 / Note (a)
Phenolic Resin 100-97-0 <10 Note (a) F,Xn,R11,R42-43
NOTES: (a) Respirable dust (total) / particled materia.
(b) Respirable particled materia (total) which does not contain
asbestos and less 1% cristallyne silica.
(c) Through skin.
==========================================================================
SECTION 3: HAZARDS IDENTIFICATION
==========================================================================
Main Hazards: Dust Inhalation.
Health effects-Eye: Released dust may cause a light temporary irritation.
Health effects-Skin: Released dust may cause a light irritation by
repeated or prolonged contacting.
Health effects-Ingestion: Ingestion may cause light irritation of mouth,
throat, and alimentary tract.
Health effects-Inhalation: Dust inhalation may cause irritation of nose,
thoat, and respiratoty tract.
==========================================================================
SECTION 4: FIRST AID MEASURES
==========================================================================
SKIN: Wash with soap and water.
Eyes: Flush immediatley with plenty of water at least during 10 minutes by
maintaining the eyes open.
Inhalation: Leave exposure, keep warm and relax.
Advise to Doctor: Treat symptomatically.
Ingestion: Wash mouth with water without inducing vomiting. Request
medical attention if necessary.
==========================================================================
SECTION 5: FIREFIGHTING MEASURES
==========================================================================
Auto -Ignition: This product is intrinsically flame resistant, but in
an oxygen enriched atmosphere may ignite at temperatures
exceeding 650 C (1.202 F)
Appropriate Extinguing Media:
Water (with or without aditives), foam, polyvalent
chemical powder, and halons.
Inapropiate Extinguing Media:
Conventiional chemical powder, CO2.
Firefighting Protective Equipment:
Carry portable breathing apparatus.
==========================================================================
SECTION 6: MEASURES FOR ACCIDENTAL SCAPE
==========================================================================
Personal Precautions: Use appropriate protective clothes.
Environmental Precautions: Avoid material entering into sewers and water
system.
Precautions by Spilling: Avoid cleaning using compressed air. Collect the
dust by vacuuming or wet mopping. Introduce
material into appropriate recipients for its
recovery or elimination. Avoid creating dust.
==========================================================================
SECTION 7: HANDLING AND STORAGE
==========================================================================
Handling: In case of dust release use ventilation by localized exhausting.
Avoid inhalation as well as skin and eyes contact with possible
resulting dust.
Storage: Store the product in sites free of high humidity.
==========================================================================
SECTION 8: EXPOSURE CONTROL / PERSONAL PROTECTION
==========================================================================
VENTILATION: The matchining,grinding and abrasing operations of this
product should be done in a ventilated area, and preferbly
by using ventilation system with localizing exhausting as
control method of the generated dust.
RESPIRATORY PROTECTION: Filtering maske type FFP1 according to EN-149 Norm.
marked CE for the EEC countries. For other countries consider
local regulations.
HANDS PROTECTION: Wear gloves if skin irritation occurs.
EYE PROTECTION: Wear protective glasses if dusty operations are done.
CORPORAL PROTECTION: Wear overall if dusty operations are done.
==========================================================================
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
==========================================================================
Physical State: Solid ph: Not applicable
Color: Grey/Black Explosion Hazard: No
Odor: None or phenolic
Autoflammability: At temperatures exceeding 650 C (1.202 F) in oxigen
enriched atmospheres.
Combusting Propertierties: No Steam Pressure: N/A
Specific Gravity: 2,90-3,10 g/cm3 Hydrosolubility: Insoluble
Liposolubility: Insoluble
Apportion ratio n-Octanol-Water: N/A
==========================================================================
SECTION 10: STABILITY AND REACTIVITY
==========================================================================
Stability: This product is stable at normal temperatures and storage
conditions.
Hazardous Decomposition Products: By Pyrolysis: Carbon monoxide, Carbon
dioxide, Phenol, Aliphatic hydrocarbons, Cetons, Alcohols,
Aromatic Hydrocarbons and Aldehydes.
By Combustion: Carbon monoxide, Carbon dioxide, Formic Acid,
Aliphatic and aromatic hydrocarbons, Hydrogen.
==========================================================================
SECTION 11: TOXICOLOGICAL INFORMATION
==========================================================================
Acute Toxicity: No acute toxic effect have been reported from the
component substances of the form product released dust.
chronic Toxicity: Prolonged exposure to the from product released dust
may cause pneumonoconiosis.
Irritation: The from product released dust may cause irritation of
the respiratory tract.
==========================================================================
SECTION 12: ECOLOGICAL INFORMATION
==========================================================================
Mobility: The product is insoluble in water.
Persistence/Degradability: The product is biodegradable.
Bioaccumulation Potential: The product is not bioaccumulable.
Ecotoxicity: The product is not toxic for the aquatic species.
==========================================================================
SECTION 13: ELIMINATION
==========================================================================
Product Elimination: Remove in accordance with corresponding state and
local regulations.
Elmiation of Waste: Remove in accordance with corresponding state and
local regulations.
==========================================================================
SECTION 14: INFORMATION REGARDING TRANSPORT
==========================================================================
ONU - ADR / RID - IMDG - IATA Not Classified
==========================================================================
SECTION 15:REGULATORY INFORMATION
==========================================================================
CE Classification: Health: Not Classified
Physical and chemical characteristics: Not Classified
Environment: Not Classified
==========================================================================
SECTION 16: OTHER INFORMATION
==========================================================================
OTHER DATA:
First MSDS Emision: 11/03/2004
Revised MSDS Data:
Uses and Restrictions: In brake systems for automobiles and
individual vehicles
|