MATERIAL SAFETY DATA SHEET
NAME OF PRODUCT MSDS DATE:
07/18/01
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 1402 Deluxe Deodorizing Urinal Screen - Blue/Bubblegum (Fragrance Only)
SYNONYMS:
PRODUCT CODES:
MANUFACTURER: Impact Products, LLC
DIVISION:
ADDRESS: 2840 Centennial Road, Toledo, OH 43617
EMERGENCY PHONE: 800-535-5053
CHEMTREC PHONE:
CHEMICAL NAME:
CHEMICAL FAMILY:
CHEMICAL FORMULA:
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT: CAS NO. TLV/TWA PEL
Benzaldehyde 100-52-7 n/a n/a
Amyl Acetate 628-63-7 100 ppm TWA 100 ppm TWA
Allyl Caproate 123-68-2 n/a n/a
Cinnamic Aldehyde 104-54-1 n/a n/a
Citral 5392-40-5 n/a n/a
Ethyl Acetate 141-78-6 440 ppm TWA
(The specific components of this product constitute a trade secret. Listed are components reported in tests with laboratory animals to
have hazardous properties other than combustilibty or flammability or eye and skin irritation from excessive contact. Both of these
hazards are addressed elsewhere on this data sheet. The relevancy of animal test data on these components to the mixture as a whole
or to humans has not been established. Note that these possible effects in test animals were reported for continual overexposure to
components of this mixture. Many of the substances having such effects are natural components of common foods and are not known
to be harmful in normal use).
HEALTH HAZARD DATA:
Amyl Acetate: Continual overexposure; irritatnt vapor, possible anesthetic or norcotic effects
Benzaldehyde: If swallowed: possible kidney damage; Continual overexposure: irritant vapor, possible anesthetic effects
Allyl Caproate: If swallowed: toxic, possible liver damage
Cinnamic Aldehyde: On continual skin contact: toxic, skin sensitizer
Citral: In concentrated form: skin sensitizer
Ethyl Acetate: Continual overexposure: irritant vapor
SECTION 3: HAZARDS IDENTIFICATION
ROUTES OF ENTRY: Eye, skin contact, inhalation
SIGNS/SYMPTOMS OF OVEREXPOSURE:
EYES: Can cause severe irritation, tearing and redness, blurred vision
SKIN: Prolonged or repeated contact can cause irritation, defatting or dryness of skin, dermatitis
INGESTION: Can cause serious health effects including nausea, vomiting, gastrointestinal irritation
INHALATION: Excessive inhalation of vapors can cause irritation of the respiratory tract, nausea, dizziness, or headache
ACUTE/CHRONIC HEALTH HAZARDS:
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known
CARCINOGENICITY
OSHA: No ACGIH: NTP: No IARC: No
CSCA STATUS: All ingredients of this product are on the ISCA inventory
PAGE 1 OF 3
MATERIAL SAFETY DATA SHEET
NAME OF PRODUCT MSDS DATE:
07/18/01
SECTION 4: FIRST AID MEASURES
EYES: Flush with water for at least 15 minutes, get medical attention if necessary
SKIN: Wash thoroughly with soap and water. Remove contaminated clothing
INGESTION: Give water to dilute, get medical attention
INHALATION: If affected by vapors, get to fresh air. If breathing is difficult, see physician. Aspiration of substantial amounts of irritant
liquids into the lungs can be fatal - get immediate medical attention
SECTION 5: FIRE-FIGHTING MEASURES
FLAMMABLE LIMITS: n/e
FLASH POINT: 110.0
METHOD USED: TCC
HAZARD CLASSIFICATION: HEALTH: 2 FLAMMABILITY: 2 REACTIVITY: 0
EXTINGUISHING MEDIA: Carbon dioxide, foam, dry chemical
SPECIAL FIRE FIGHTING PROCEDURES: Class B fire procedures. Wear NIOSH approved respirator and full protective gear
UNUSUAL FIRE AND EXPLOSION HAZARDS: None known
HAZARDOUS DECOMPOSITION PRODUCTS:
SECTION 6: ACCIDENTAL RELEASE MEASURES
ACCIDENTAL RELEASE MEASURES:
SECTION 7: HANDLING AND STORAGE
HANDLING AND STORAGE: Handle as flammable or combustible liquid as appropriate. Avoid eye contact and prolonged contact with
the skin. Use adequate ventilation. Wash thoroughly after handling.
OTHER PRECAUTIONS:
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
VENTILATION : Local exhaust is recommended, general mechanical ventilation is usually adequate
RESPIRATORY PROTECTION: None normally required with adequate ventilation
EYE PROTECTION: Safety glasses or goggles should be worn in all industrial operations
SKIN PROTECTION: Gloves, coveralls, aprons, boots as necessary to prevent skin contact
OTHER PROTECTIVE CLOTHING/EQUIPMENT:
WORK HYGIENIC PRACTICES:
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE/ODOR: Yellow liquid with bubblegum characteristic
BOILING POINT: n/e
MELTING POINT: n/e
VAPOR PRESSURE (mmHg): n/e
VAPOR DENSITY (AIR = 1): Heavier than air
PAGE 2 OF 3
MATERIAL SAFETY DATA SHEET
NAME OF PRODUCT MSDS DATE:
07/18/01
SPECIAL GRAVITY (H2O = 1): 0.933
EVAPORATION RATE: Slower than n-Butyl Acetate
SOLUBILITY IN WATER: Insoluble
PERCENT VOLATILE: n/e
VISCOSITY:
SECTION 10: STABILITY AND REACTIVITY
STABLE UNSTABLE
STABILITY: X
CONDITIONS TO AVOID (STABILITY):
INCOMPATIBILITY (MATERIAL TO AVOID): Strong oxidizing agents
HAZARDOUS DECOMPOSITION: Carbon dioxide or carbon monoxide and smoke on combustion
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID (POLYMERIZATION):
SECTION 11: TOXICOLOGICAL INFORMATION
TOXICOLOGICAL INFORMATION: This product contains the following toxic chemicals subject to the reporting requirements of
Section 313 of the Emergency Planning and Right To Know Act of 1986 and 40 CFR 372.
This information must be included in all MSDSs that are copied and distributed for this material.
None
SECTION 12: ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION:
SECTION 13: DISPOSAL CONSIDERATIONS/PROCEDURES FOR SPILL OR LEAK CLEANUP
WASTE DISPOSAL METHOD: Soak up with absorbent material for incineration. Observe local, state, and federal regulations
PROCEDURE FOR SPILL OR LEAK CLEANUP: Remove ignition sources. Contain spill. Absorb with suitable chemical absorbents for
disposal
SECTION 14: TRANSPORT INFORMATION
SECTION 15: REGULATORY INFORMATION
SECTION 16: OTHER INFORMATION
OTHER INFORMATION:
DISCLAIMER: The information furnished herein is believed to be accurate and represents the best data currently available to us.
No warranty, expressed or implied is made and Impact Products assumes no legal responsibility or liability
resulting from its use.
PAGE 3 OF 3
|