MATERIAL SAFETY DATA SHEET
CLEAR PENETRATING EPOXY SEALER
Either Part A or Part B
===================== SECTION I - PRODUCT IDENTIFICATION =======================
General Info: Distributed by FOR CHEMICAL EMERGENCY
The Rot Doctor Spill, Leak, Fire, Exposure or Accident
P.O. BOX 30612 CALL INFOTRAC - Day or Night
Seattle, WA 98103 1-800-535-5053
(206)364-2155 Outside the United States call Collect 1-352-323-3500
Date of Preparation: 4/15/95
==================== SECTION II - HAZARDOUS INGREDIENTS =======================
Hazardous Compounds CAS# OSHA PEL ACGIH TL WEIGHT%
Aromatic Hydrocarbon 64742-95-6 100 PPM (TWA) 100 PPM (5MIN) < 50
Xylene (Xylol) 1330-20-7 100 PPM (TWA) 100 PPM (TWA) < 50
Toluene (Toluol) 108-88-3 100 PPM (TWA) 100 PPM (TWA) < 50
Isopropyl Alcohol 67-63-0 400 PPM (TWA) 400 PPM (TWA) < 50
(2-Propanol)
2-Butanone 78-93-3 200 PPM (TWA) 200 PPM (TWA) < 50
4-Methyl 2-Pentanone 108-10-1 100 PPM (TWA) 75 PPM (TWA) < 50
2-Heptanone 110-43-0 100 PPM (TWA) 50 PPM (TWA) < 50
4-Methyl 2-hexanone 110-12-3 50 PPM (TWA) 50 PPM (TWA) < 50
2-Pentanone 107-87-9 200 PPM (TWA) 250 PPM (TWA) < 50
Dipropylene Glycol 034590-94-8 100 PPM (TWA) 150 PPM (TWA) < 50
Monomethylether
Diisobutyl Ketone 108-83-8 25 PPM (TWA) 25 PPM (TWA) < 50
Ethyl Acetate 141-78-6 N/A 400 PPM (TWA) < 50
Isobutyl Acetate 110-19-0 N/A 150 PPM (TWA) < 50
Ethyl 3-Ethoxy Propionate 763-69-9 N/A 50 PPM (TWA) < 50
Propylene Glycol Mono- 108-65-6 N/A 1000 PPM (TWA) < 50
methylether Acetate
Hexyl Acetate 7789-99-3 N/A 50 PPM (TWA) < 50
Isobutyl Isobutyrate 97-85-8 100 PPM (TWA-MFGR) N/A < 50
Diacetone Alcohol 123-42-2 50 PPM (TWA) 50 PPM (TWA) < 50
Cyclohexanone 108-94-1 50 PPM (TWA) 25 PPM (skin) < 50
HMIS RATINGS H F R PA
22 1 G
Suspected Cancer Agent: NO
Volatile Organic Content (VOC) mixed: 675 g/l
SPIRIT CONTENT ZERO BY U.K. CUSTOMS DEFINITION
MATERIAL SAFETY DATA SHEET
CLEAR PENETRATING EPOXY SEALER Either Part A or Part B
==================== SECTION III - PHYSICAL CHARACTERISTICS =====================
Boiling Point: 150?F Specific Gravity (H O=1): O=1): 0.9
Vapor Pressure (mm Hg): 30 mm @ 20?C pH: N/A
Vapor Density (Air=1): approx. 2 Evaporation rate (Butyl Acetate=1): 0.2
Solubility in water: partially soluble Melting Point: N/A
Appearance and Odor: clear, characteristic odor
================ SECTION IV -FIRE AND EXPLOSION HAZARD DATA ===================
Flash Point/Method Used: 23癈 (73癋) / Tag closed cup
Autoignition Temperature: Not determined
Flammability Limits: Not determined
Extinguishing Media:
Waterfog, carbon dioxide, dry chemical, or foam. Do not use a direct stream of water. Product will float and can be
reignited on surface of water.
Special Fire-fighting Procedures:
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Water may
be ineffective for firefighting. Use water spray to keep fire-exposed containers cool.
Unusual Fire and Explosion Hazards:
Vapors are heavier than air and may accumulate in low areas or areas inadequately ventilated. Vapors may also
travel along the ground to the ignited at locations distant from the handling site; flashback of flame to the
handling site may occur.
======================== SECTION V - REACTIVITY DATA ===========================
Stability: Stable
Hazardous Decomposition or Byproducts:
Oxides of nitrogen, carbon monoxide, and unidentified organic compounds may be formed during combustion.
Incompatibility (Materials to Avoid): Store away from acidic materials and oxidizers.
Polymerization: Will not occur.
2 of 6
MATERIAL SAFETY DATA SHEET
CLEAR PENETRATING EPOXY SEALER Either Part A or Part B
======================= SECTION VI -HEALTH HAZARD DATA =======================
Routes of Entry: Inhalation Slight
Skin Slight
Ingestion Yes
Health Hazards (Acute and Chronic): SEE ATTACHMENT
Carcinogenicity: No
IARC Monographs: No
OSHA Regulated: No
Additional Carcinogenicity Information (if any): None
Signs and Symptoms of Exposure: Irritation and drying of the skin. May cause irritation of the eyes.
Medical Conditions that may be Aggravated by Exposure: Dermatitis or other skin sensitivity.
Emergency and First Aid Procedures: SEE ATTACHMENT
=============== SECTION VII -EMERGENCY RESPONSE PROCEDURES ================
Container size: 5 gallons or less
Steps to be Taken if Material is Released or Spilled:
1. Human Health Protection: Chemical-resistant gloves. Eye protection if necessary.
2. Containment and Control: Prevent release into storm drains or sanitary sewers. Absorb with clay or similar
material.
3. Decontamination: Wash with soap and water.
4. Hazardous Waste Packaging/Shipping Requirements: Product is classified as hazardous. Ship as hazardous
waste, flammable liquid, N.O.S. ORM-E if local regulations prohibit disposal in sanitary landfill.
Waste Disposal Method:
Absorb in inert material and dispose of in sanitary landfill if local ordinances permit. Transport to EPA-
approved landfill if local authorities do not accept sanitary landfill disposal.
3 of 6
MATERIAL SAFETY DATA SHEET
CLEAR PENETRATING EPOXY SEALER Either Part A or Part B
====================== SECTION VIII - SPECIAL PRECAUTIONS =======================
Precautions to be taken in Handling and Storage:
Keep away from heat. Do not allow contact with acidic materials or oxidizers.
Other Precautions: Keep out of the reach of children.
======================= SECTION IX - CONTROL MEASURES =========================
Respiratory Protection: None with normal use
Ventilation: Local exhaust usually adequate
Protective Gloves: Recommended for sensitive individuals
Eye Protection: Safety glasses or chemical goggles to prevent eye contact
Other Protective Equipment or Clothing: None
==================== SECTION X - REGULATORY INFORMATION ======================
DOT Class: UN1263
RCRA Status: Not a hazardous waste under RCRA (40CFR 261)
CERCLA Status: Not listed
TSCA Inventory Status: Chemical components listed on TSCA Inventory.
California State Health & Safety Code Section 25249.6 Warning:
Detectable amounts of chemicals known to the State of California to cause cancer, birth defects or other
reproductive harm may be found in this material, its containers, or the labels or packing materials associated
therewith.
California State Product Liability Warning (Business and Professions Code, Section 1714.45):
This product is inherently unsafe. It cannot be made safe.
4 of 6
MATERIAL SAFETY DATA SHEET
CLEAR PENETRATING EPOXY SEALER Either Part A or Part B
ATTACHMENT
HEALTH HAZARDS (Acute and Chronic)
Health Information
Acute Toxicity: Overexposure can lead to central nervous system depression producing such effects as headache,
dizziness, nausea, and loss of consciousness.
It is considered similar to benzene but considerably less severe. Headaches, loss of appetite, and poor coordination
are symptoms of prolonged exposure to moderate concentrations. Cases for acute poisoning have been reported
rarely. It is an eye, nose, and throat irritant. It can burn the cornea if not removed promptly by flooding with water.
Skin irritation may develop after repeated exposure.
Effects of Overexposure: Severe nervousness, muscular fatigue, and insomnia may occur after an acute or chronic
overexposure. Prolonged contact, as from clothing wet with the material, may cause chemical burns.
Eye Contact: Causes severe conjunctivitis, seen as marked redness and swelling of the conjunctiva, and chemical
burns of the cornea. Short-term liquid or vapor contact may result in slight eye irritation. Prolonged and repeated
contact may be more irritating.
Skin Contact: Prolonged and repeated liquid contact can cause defatting and drying of the skin which may result in
skin irritation and dermatitis. Brief contact causes irritation, seen as local redness and possible swelling.
Inhalation: High concentration or prolonged exposure to lower concentrations may be slightly irritating to mucous
membranes.
Basis of Information: Toxicology and Biochemistry of Aromatic Hydrocarbons by H. W. Gerarde.
Emerqency and First Aid Procedures
Eye Contact: Flush with water for 15 minutes while holding eyelids open. Get medical attention.
Skin Contact: Wash with soap and water. Remove contaminated clothing and shoes; do not reuse until cleaned. If
persistent irritation occurs, get medical attention.
Inhalation: Remove victim to fresh air and provide oxygen if breathing is difficult. Give artificial respiration of not
breathing. Get medical attention.
5 of 6
MATERIAL SAFETY DATA SHEET
CLEAR PENETRATING EPOXY SEALER Either Part A or Part B
ATTACHMENT
HEALTH HAZARDS (Acute and Chronic)
Health Information
[continued]
Ingestion: DO NOT INDUCE VOMITING. If vomiting occurs spontaneously, keep head below hips to prevent
aspiration of liquid into the lungs. If conscious, administer saline cathartics, milk, or white of egg. Obtain medical
attention.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
Liquid ingestion may result in vomiting; aspiration (breathing) of vomitus in the lungs MUST BE AVOIDED as even
small quantities in the lungs may result in chemical pneumonitis and pulmonary hemorrhage.
NOTE TO THE PHYSICIAN: If more than 2.0 ml per kg has been ingested and vomiting has not occurred, emesis
should be induced with supervision. Keep victim's head below hips to prevent aspiration. If symptoms such as loss of
gag reflex, convulsions or unconsciousness occur before emesis, gastric lavage using a cuffed endotracheal tube
should be considered. There is no specific antidote. Treatment of overexposure should be directed at the control of
symptoms and the clinical condition.
____________________________________________________________________________
The information contained herein is based on data considered accurate. However, no warranty is
expressed or implied regarding the accuracy of these data or the results to be obtained from the use
thereof.
Vendor assumes no responsibility for injury to vendee or third persons proximately caused by the
material if reasonable safety procedures are not adhered to as stipulated in the data sheet.
Additionally, vendor assumes no responsibility for injury to vendee or third persons proximately
caused by abnormal use of the material even if reasonable safety procedures are followed.
Furthermore, vendee assumes the risk in his use of the material.
____________________________________________________________________________
6 of 6
|