SAFETY DATA SHEET
Sikafloor 156 Part A
Date of issue - 21/05/2004. SKFL156A
1. PRODUCT AND COMPANY IDENTIFICATION
SKFL156A
Product Code
Sikafloor 156 Part A
Product Name
Two component, solvent free primer based on epoxy resin.
Product Description
Sika Limited
Manufacturer/Supplier
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component CAS/EINECS Concentration Classification Risk Phrases
Epoxy resin ( No.Av. mol.wt. < 700) 25068-38-6 50.00% - 100.00% Xi, N R36/38, R43, R51/53
Aliphatic glycidyl ether 68609-97-2 2.50% - 10.00% Xi, N R38, R43, R51/53
3. HAZARD IDENTIFICATION
Irritating to eyes and skin.
Main Hazards
May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
4. FIRST AID MEASURES
Immediately flood the eye with plenty of water for at least 15
Eye Contact
minutes, holding the eye open.
Obtain medical attention urgently.
Wipe off as much as possible with a clean dry cloth. Wash skin
Skin Contact
thoroughly with soap and water.
Solvents should not be used to clean skin because they may
increase the penetration of the material.
Wash out mouth with water. Obtain medical attention.
Ingestion
Remove from exposure.
Inhalation
In cases of possible respiratory irritation or if feeling unwell in
cases of prolonged exposure,obtain medical attention.
5. FIRE FIGHTING MEASURES
Not readily combustible.
Extinguishing Media
Use foam, dry chemical or carbon dioxide.
Do not use water jet.
Extinguishing Media - Not suitable
Combustion will produce smoke,carbon dioxide and carbon
Special Hazards of Product
monoxide.
Wear full protective clothing and self-contained breathing
Protective Equipment for Fire-Fighting
apparatus.
CM Version - 2.01 Page: 1/4
SAFETY DATA SHEET
Sikafloor 156 Part A
Date of issue - 21/05/2004. SKFL156A
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing.
Personal Precautions
Try to prevent the material from entering drains or water courses.
Environmental Precautions and Clean-up
Methods
Contain and absorb using earth, sand or other inert material.
Spillages
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Use in well ventilated area.
Handling
Avoid contact with eyes, skin and clothing.
Storage area should be: cool. dry.
Storage
Storage temperature should be controlled to between 5 and 25 癈.
Store in the original container securely closed . Keep away from
foodstuffs
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Use of the basic principles of Industrial Hygiene will enable this
Engineering Control Measures
material to be used safely.
Respiratory protection not normally required.
Respiratory Protection
Wear suitable impervious gloves.
Hand Protection
The insides of gloves must be kept scrupulously clean.
Chemical goggles.
Eye Protection
9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid.
Physical State
Straw - Clear.
Color
Faint. Characteristic.
Odor
Exceeds 100.
Flash Point 癈
Immiscible.
Solubility - Water
Approx. 1100 at 20 癈.
Density (kg/m3)
Mobile liquid at ambient temperatures.
Viscosity (at 20癈)
10. STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Heating may produce: oxides of carbon. acrid smoke and irritating
Hazardous Decomposition Products
fumes.
11. TOXICOLOGICAL INFORMATION
Low order of acute toxicity.
Acute toxicity
Irritating to the eyes.
Eye irritation
The product should be considered as a moderate skin irritant.
Skin irritation
The low molecular weight epoxy resin is a potential skin sensitiser.
Sensitization - Skin
CM Version - 2.01 Page: 2/4
SAFETY DATA SHEET
Sikafloor 156 Part A
Date of issue - 21/05/2004. SKFL156A
12. ECOLOGICAL INFORMATION
The product is insoluble in water.
Mobility
The product is expected to be not readily biodegradable.
Persistence/degradability
This material is harmful to aquatic organisms.
Ecotoxicity
13. DISPOSAL
Dispose of as Special Waste.
Product Disposal
Arrange for disposal via a licensed waste contractor.
Dispose of containers with care.
Container Disposal
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste
contractor.
14. TRANSPORT INFORMATION
3082
UN : UN number
Environmentally hazardous substances, liquid, n.o.s.
UN : Proper shipping name
(contains Epoxy Resin)
9
UN : Class
3
UN : Packing Group
3082
ADR/RID : Number
Environmentally hazardous substance, liquid, n.o.s.
ADR/RID : Proper shipping name
(contains Epoxy Resin)
9
ADR/RID : Class
11(c) Class M6
ADR/RID : Item Number
Environmentally hazardous substance, liquid, n.o.s.
IMDG : Proper shipping name
contains Epoxy resin
3
IMDG : Packing Group
9
IMDG : Class
P
IMDG : Marine Pollutant
Environmentally hazardous substance, liquid, n.o.s.
IATA : Proper shipping name
contains Epoxy Resin
15. REGULATORY INFORMATION
Irritant, Dangerous for the environment
Label Requirements
Irritating to eyes and skin.
Risk Phrases
May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
Avoid contact with skin.
Safety Phrases
Wear suitable gloves.
Contains epoxy constituents. See information supplied by the
manufacturer.
reaction product: bisphenol F-(epichlorhydrin) epoxy resin
Contains
(No av. mol wt <700)
reaction product: bisphenol A-(epichlorhydrin) epoxy resin (
(No av mol wt <700)
oxirane, mono[(C12-14-alkyloxy)methyl]derivs
CM Version - 2.01 Page: 3/4
SAFETY DATA SHEET
Sikafloor 156 Part A
Date of issue - 21/05/2004. SKFL156A
16. OTHER INFORMATION
20.05.1998
First Issue Date
Regulatory information
Revisions Highlighted
Customers are urged to ensure that the product is entirely suitable
Uses and Restrictions
for their own purpose.It is the customer`s responsibilty to ensure
that a suitable and sufficient assessment of the risks created by
the use of the product is undertaken.
Health and Safety at Work etc Act, 1974, and relevant Statutory
UK Legislation
Provisions.
SI 2002/1689: Chemicals (Hazard Information and Packaging)
Regulations,
SI 2002/2677: The Control of Substances Hazardous to Health
Regulations
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care)
Regulations.
Approved Code of Practice - Management of Health and Safety at
UK Guidance Publications
Work, HSE.
General Approved Code of Practice to COSHH Regulations, HSE.
The information contained in this SDS corresponds to our level of
Footnote
knowledge at the time of publication. All warranties are excluded.
Our most current General Sales Conditions shall apply. Please
consult the Technical Data Sheet prior to use.
SAFETY DATA SHEET
Sikafloor 156 Part B
Date of issue - 23/09/2005. SKFL156B
1. PRODUCT AND COMPANY IDENTIFICATION
SKFL156B
Product Code
Sikafloor 156 Part B
Product Name
Two component, solvent free primer based on epoxy resin.
Product Description
Sika Limited
Manufacturer/Supplier
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component CAS/EINECS Concentration Classification Risk Phrases
Benzyl Alcohol 100-51-6 25.00% - 50.00% Xn R20/22
M-phenylebis(methylamine) 1477-55-0 10.00% -25.00% C R20/22, R35, R43,
R52/53
Isophoronediamine 2855-13-2 10.00% - 25.00% C R21/22, R34, R43,
R52/53
3,6,9-triazaundecamethylenediamine 112-57-2 2.50% - 10.00% C, N R21/22, R34, R43,
R51/53
Trimethylhexamethylene diamine 25620-58-0 1.00% - 2.50% C R22, R34, R43,
R52/53
Trimethylhexamethylenediamine (cyanethylated) 2.50% - 10.00% C, N R22, R34, R43,
R51/53
2,4,6-Tri(dimethylaminomethyl) phenol 90-72-2 2.50% - 10.00% Xn R22, R36/38
3. HAZARD IDENTIFICATION
Causes severe burns.
Main Hazards
Harmful by inhalation, in contact with skin and if swallowed.
May cause sensitisation by skin contact.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
4. FIRST AID MEASURES
Immediately flood the eye with plenty of water for at least 15
Eye Contact
minutes, holding the eye open.
Eyelids should be held away from the eyeball to ensure thorough
rinsing.
Obtain medical attention urgently.
Wipe off as much as possible with a clean dry cloth.
Skin Contact
If material proves difficult to remove, use suitable skin cleanser
(not solvent).
Solvents should not be used to clean skin because they may
increase the penetration of the material.
Contaminated clothing should be washed or dry-cleaned before
re-use.
Do not induce vomiting. Obtain medical attention.
Ingestion
Remove from exposure.
Inhalation
In cases of possible respiratory irritation or if feeling unwell in
cases of prolonged exposure,obtain medical attention.
CM Version - 4 Page: 1/4
SAFETY DATA SHEET
Sikafloor 156 Part B
Date of issue - 23/09/2005. SKFL156B
5. FIRE FIGHTING MEASURES
Not readily combustible. Use foam, dry chemical or carbon dioxide.
Extinguishing Media
Do not use water jet.
Extinguishing Media - Not suitable
Thermal decomposition or burning may release oxides of carbon,
Special Hazards of Product
nitrogen and other toxic gases and vapours.
Wear full protective clothing and self-contained breathing
Protective Equipment for Fire-Fighting
apparatus.
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing.
Personal Precautions
Try to prevent the material from entering drains or water courses.
Environmental Precautions and Clean-up
Methods
Contain and absorb using earth, sand or other inert material.
Spillages
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Mix in a well ventilated area.
Handling
Avoid contact with eyes, skin and clothing.
Storage area should be: cool. dry.
Storage
Storage temperature should be controlled to between 5 and 25 癈.
Store in the original container securely closed . Keep away from
foodstuffs
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Use of the basic principles of Industrial Hygiene will enable this
Engineering Control Measures
material to be used safely.
Respiratory protection not normally required.
Respiratory Protection
Wear suitable impervious gloves.
Hand Protection
The insides of gloves must be kept scrupulously clean.
Chemical goggles.
Eye Protection
9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid.
Physical State
Amber.
Color
Amine like.
Odor
Approx. 12 in water. (soluble phase)
pH
Exceeds 100.
Flash Point 癈
Partially soluble.
Solubility - Water
Approx. 1010 at 23 癈.
Density (kg/m3)
40 mPas approx
Viscosity (at 20癈)
CM Version - 4 Page: 2/4
SAFETY DATA SHEET
Sikafloor 156 Part B
Date of issue - 23/09/2005. SKFL156B
10. STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Heating may produce: ammonia. oxides of carbon. oxides of
Hazardous Decomposition Products
nitrogen. acrid smoke and irritating fumes.
11. TOXICOLOGICAL INFORMATION
Low order of acute toxicity
Acute toxicity
Liquid and vapour can cause irritation on contact and at high
Eye irritation
concentrations.
This material is corrosive to the skin.
Skin irritation
May cause sensitisation.
Sensitization - Skin
12. ECOLOGICAL INFORMATION
The product is sparingly soluble in water.
Mobility
The product is expected to be not readily biodegradable.
Persistence/degradability
This material is harmful to aquatic organisms.
Ecotoxicity
13. DISPOSAL
Hazardous waste.
Product Disposal
Arrange for disposal via a licensed waste contractor.
Dispose of containers with care.
Container Disposal
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste
contractor.
14. TRANSPORT INFORMATION
1760
UN : UN number
Corrosive liquid, n.o.s.
UN : Proper shipping name
(contains Isophoronediamine, Xylylenediamine)
8
UN : Class
3
UN : Packing Group
1760
ADR/RID : Number
Corrosive Liquid, N.O.S.
ADR/RID : Proper shipping name
(contains Isophoronediamine, Xylylenediamine)
8
ADR/RID : Class
Class C9
ADR/RID : Item Number
80
ADR/RID : Hazard Identification Number
Corrosive liquid, N.O.S.
IMDG : Proper shipping name
(contains Isophoronediamine, Xylylenediamine)
3
IMDG : Packing Group
8
IMDG : Class
F-A, S-B
IMDG : Ems Number
Corrosive liquid, N.O.S.
IATA : Proper shipping name
contains Isophoronediamine, Xylylenediamine
3
IATA : Packing Group
8
IATA : Class
CM Version - 4 Page: 3/4
SAFETY DATA SHEET
Sikafloor 156 Part B
Date of issue - 23/09/2005. SKFL156B
15. REGULATORY INFORMATION
Corrosive
Label Requirements
Causes severe burns.
Risk Phrases
May cause sensitisation by skin contact.
Harmful by inhalation, in contact with skin and if swallowed.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Avoid contact with skin.
Safety Phrases
In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
Wear suitable protective clothing and eye/face protection.
Benzyl alcohol
Contains
M-phenylebis(methylamine)
3-aminomethyl-3,5,5-trimethylcyclohexylamine
3,6,9-triazaundecamethylenediamine
Trimethylhexane-1,6-diamine
Trimethylhexamethylenediamine-1,6 cyanethylated
16. OTHER INFORMATION
20.05.1998
First Issue Date
Composition and Information on Ingredients
Revisions Highlighted
Hazards Identification
Regulatory Information
Customers are urged to ensure that the product is entirely suitable
Uses and Restrictions
for their own purpose.It is the customer`s responsibilty to ensure
that a suitable and sufficient assessment of the risks created by
the use of the product is undertaken.
Health and Safety at Work etc Act, 1974, and relevant Statutory
UK Legislation
Provisions.
SI 2002/1689: Chemicals (Hazard Information and Packaging)
Regulations
SI 2002/2677: The Control of Substances Hazardous to Health
Regulations
SI No 2839 1991 Environmental Protection (Duty of Care)
Regulations.
SI 2005/ 894 Hazardous waste regulations 2005
General Approved Code of Practice to COSHH Regulations, HSE.
UK Guidance Publications
Approved Code of Practice - Management of Health and Safety at
Work, HSE.
The information contained in this SDS corresponds to our level of
Footnote
knowledge at the time of publication.All warranties are
excluded.Our most current General Sales Conditions shall apply.
Please consult the Technical Data Sheet prior to use.
|