Page 1 of 2
May 2008
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200
AND SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC
LAW 99-499. STANDARD SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
MANUFACTURER/ EUTECTIC CORPORATION TELEPHONE NUMBER:
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive 1-800-558-8524
Menomonee Falls, WI 53051 USA
ABRACOR ?Formula 5 HT - Hardener
PRODUCT NAME:
PRODUCT CLASSIFICATION: Wear Resistant Composite
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes
and gases produced during normal use of these products are covered in Section V. The term "Hazardous" in
"Hazardous Ingredients" should not only be interpreted as a term required and defined in OSHA Hazard
Communication Standard (29 CFR Part 1910.1200), but also as defined by other regulatory agencies. The
chemicals or compounds subject to reporting under Title III, in Section 313, of the Superfund Amendments
and Reauthorization Act (SARA) are marked by the symbol #.
1. Ingredients:
Ingredient %W/W OSHA PEL ACGIH TLV CAS #
DIETHLENETRIAMINE 10-15% N/E N/E 111-40-0
ALPHATIC AMINE 0-10% N/E N/E MIXTURE
111-40-0
80-05-7
AROMATIC AMINE 10-20% N/E N/E MIXTURE
68479-98-1
1761-71-3
TRIS 2,4,6 0-10% N/E N/E 90-72-2
DIMETHYLAMINEMETHYL
PHENOL
INORGANIC FILLERS 70-80% N/E N/E N/A
Exposure limits are subject to change. Contact ACGIH, OSHA, NIOSH, and IARC for current values.
2. Physical Data:
Boiling Point: Not Applicable
Vap. Press: Not Applicable
Vap. Density: Not Applicable
Sol. In Water: Slight
Sp. Gravity: 2.15
Color: Black
Appearance: Gritty paste
Odor: Ammonia
Physical State: Not Applicable
3. Fire and Explosion Hazard Data:
Flash Point: 480?F (closed cup)
Flammable Limits
LFL: Not Applicable
UFL: Not Applicable
Extinguishing Media: Water fog, CO2, dry chemical
MSDS: ABRACOR ?Formula 5 HT - Hardener Page 2 of 2
Fire Fighting Equipment: Water or foam may cause frothing which can be
violent and life threatening if sprayed directly into
burning liquid. Use self contained breathing
apparatus with full face piece.
These products as shipped are non-hazardous, nonflammable, non-explosive, and non-reactive.
Rating under National Fire Protection 704: Health, 1: Flammability, 0: Reactivity, 0.
4. Reactivity Data:
Stability: Stable
Condition to Avoid: Extreme Heat
Materials to avoid: Strong oxidizing agents, epoxy resin will cause
polymerization.
Hazardous Products: May form toxic materials, carbon dioxide and carbon monoxide,
various hydrocarbons, etc.
5. Environmental and Disposal Information:
Action to take for spills/leaks: Scrape or wipe up with suitable material for
disposal. Flush contaminated area with water.
Disposal Method: Deposit in landfill in accordance with all local, state and Federal
regulations or incinerate in accordance with local pollution
regulations.
6. Health Hazard Data:
Eye: May cause eye irritation
Skin Contact: May cause reddening, irritation, dermatitis after prolonged or repeated exposure.
Ingestion: No specific information available - may contain slightly toxic material seek
medical attention.
Chronic Effects: Contains polyethylene polyamines which are reported to cause
liver and kidney damage on repeated over exposure. Not
classified as to carcinogenicity. Both positive and negative Ames
test results reported similar material.
PRIMARY ROUTES OF ENTRY are the respiratory system, eyes, and/or skin.
PREEXISTING respiratory or allergic conditions may be aggravated in some individuals.
7. First Aid:
Eye: Flush eyes with water for 15 minutes-contact physician.
Skin Contact: Remove contaminated clothing. Wash with soap and water.
Ingestion: Seek medical attention if large amounts are swallowed.
Inhalation: Remove to fresh air. Provide oxygen if necessary.
8. Handling Precautions:
Exposure Guidelines: None established.
Ventilation: General mechanical ventilation. Exhaust required for
application in confined areas.
Respiratory Protection: NIOSH respirator. Organic vapor.
Protective Equipment: Coveralls or work clothes covering skin, rubber gloves.
9. Comments:
The information in this MSDS was obtained from sources we believe are reliable. However, this
information is provided without any representation or warranty, expressed or implied, regarding
accuracy or correctness. The conditions or methods of handling, storage, use, and disposal of the
product are beyond our control and may be beyond our knowledge. For this and other reasons we
do not assume responsibility and expressly disclaim liability of loss, damage, or expense arising
from it or in any way connected with the handling, storage, use, or disposal of the product.
Page 1 of 2
May 2008
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200
AND SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC
LAW 99-499. STANDARD SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
MANUFACTURER/ EUTECTIC CORPORATION TELEPHONE NUMBER:
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive 1-800-558-8524
Menomonee Falls, WI 53051 USA
ABRACOR ?Formula 5 HT - Resin
PRODUCT NAME:
PRODUCT CLASSIFICATION: Wear Resistant Composite
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes
and gases produced during normal use of these products are covered in Section V. The term "Hazardous" in
"Hazardous Ingredients" should not only be interpreted as a term required and defined in OSHA Hazard
Communication Standard (29 CFR Part 1910.1200), but also as defined by other regulatory agencies. The
chemicals or compounds subject to reporting under Title III, in Section 313, of the Superfund Amendments
and Reauthorization Act (SARA) are marked by the symbol #.
1. Ingredients:
Ingredient %W/W OSHA PEL ACGIH TLV CAS #
BISPHENOL A- 10-20% N/E N/E 25068-38-6
EPICHLOROHYDRIN
RESIN
POLYMER OF 0-10% N/E N/E 28064-14-4
EPICHLOROHYDRIN PHENOL ?br>
FORMALDEHYDE NOVOLAC
INORGANIC FILLERS 70-80% N/E N/E N/A
Exposure limits are subject to change. Contact ACGIH, OSHA, NIOSH, and IARC for current values.
2. Physical Data:
Boiling Point: Not Applicable
Vap. Press: Not Applicable
Vap. Density: Not Applicable
Sol. In Water: Slight
Sp. Gravity: 2.32
Color: Gray
Appearance: Thick gritty paste
Odor: Sweet
Physical State: Not Applicable
3. Fire and Explosion Hazard Data:
Flash Point: 480?F (closed cup)
Flammable Limits
LFL: Not Applicable
UFL: Not Applicable
Extinguishing Media: Water fog, CO2, dry chemical
Fire Fighting Equipment: Water or foam may cause frothing which can be
violent and life threatening if sprayed directly into
burning liquid. Use self contained breathing
apparatus with full face piece.
These products as shipped are non-hazardous, nonflammable, non-explosive, and non-reactive.
Rating under National Fire Protection 704: Health, 1: Flammability, 0: Reactivity, 0.
MSDS: ABRACOR ?Formula 5 HT - Resin Page 2 of 2
4. Reactivity Data:
Stability: Stable
Condition to Avoid: Extreme Heat
Materials to avoid: Strong oxidizing agents, epoxy resin will cause
polymerization.
Hazardous Products: May form toxic materials, carbon dioxide and carbon
Monoxide, various hydrocarbons, etc.
5. Environmental and Disposal Information:
Action to take for spills/leaks: Scrape or wipe up with suitable material
for disposal. Flush contaminated area with
water.
Disposal Method: Deposit in landfill in accordance with all local,
state and Federal regulations or incinerate in
accordance with local Pollution regulations.
6. Health Hazard Data:
Eye: May cause eye irritation
Skin Contact: May cause reddening, irritation, dermatitis after prolonged or
repeated Exposure.
Ingestion: Single dose toxicity is considered extremely low.
Inhalation: No adverse effects anticipated
Chronic Effects: Repeated exposures are not anticipated to cause any significant
adverse effects.
PRIMARY ROUTES OF ENTRY are the respiratory system, eyes, and/or skin.
PREEXISTING respiratory or allergic conditions may be aggravated in some individuals.
7. First Aid:
Eye: Flush eyes with water for 15 minutes-contact physician.
Skin Contact: Remove contaminated clothing. Wash with soap and water.
Ingestion: Seek medical attention if large amounts are swallowed.
Inhalation: Remove to fresh air. Provide oxygen if necessary.
8. Handling Precautions:
Exposure Guidelines: None established.
Ventilation: General mechanical ventilation. Exhaust required for application
in confined areas.
Respiratory Protection: Not ordinarily required.
Protective Equipment: Coveralls or work clothes covering skin, rubber gloves.
9. Comments:
The information in this MSDS was obtained from sources we believe are reliable. However, this
information is provided without any representation or warranty, expressed or implied, regarding
accuracy or correctness. The conditions or methods of handling, storage, use, and disposal of the
product are beyond our control and may be beyond our knowledge. For this and other reasons we
do not assume responsibility and expressly disclaim liability of loss, damage, or expense arising
from it or in any way connected with the handling, storage, use, or disposal of the product.
|