SAFETY DATA SHEET
Sikafloor 2430 Part A
Date of issue - 24/04/2002. SKFL243A
PRODUCT AND COMPANY IDENTIFICATION
Product Code SKFL243A
Product Name Sikafloor 2430 Part A
2-component solvented epoxy resin based protective coating for floors
Product Description
and walls.
Sika Limited
Manufacturer/Supplier
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component Concentration Classification Risk Phrases
1) Xylene 1330-20-7 10.00% - 25.00% Xn R10, R20/21, R38
2) Cyclohexanone 108-94-1 1.00% - 2.50% Xn R10, R20
3) Solvent Naptha (Petroleum),Light Aromatic. 64742-95-6 1.00% - 2.50% Xn, N R10, R37, R51/53,
R65, R66, R67
4) 2-Methylpropan-1-ol 78-83-1 2.50% - 10.00% Xi R10, R37/38, R41,
R67
5) Naphtha (Petroleum)Hydrosulphurised Heavy 64742-82-1 1.00% - 2.50% Xn, N R10, R51/53, R65,
R66, R67
6) Ethyl benzene 100-41-4 1.00% - 2.50% F, Xn R11, R20
HAZARD IDENTIFICATION
Flammable.
Main Hazards
Harmful by inhalation and in contact with skin.
Irritating to skin.
Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
FIRST AID MEASURES
Immediately flood the eye with plenty of water for at least 15 minutes,
Eye Contact
holding the eye open.
Obtain medical attention urgently.
Wash skin thoroughly with soap and water.
Skin Contact
Solvents should not be used to clean skin because they may increase
the penetration of the material.
Contaminated clothing should be washed or dry-cleaned before re-use.
Obtain medical attention if blistering occurs or redness persists.
Do not induce vomiting.
Ingestion
Obtain medical attention.
Remove from exposure. Obtain medical attention.
Inhalation
CM Version - 2 Page: 1/4
SAFETY DATA SHEET
Sikafloor 2430 Part A
Date of issue - 24/04/2002. SKFL243A
FIRE FIGHTING MEASURES
Use foam, dry chemical or carbon dioxide.
Extinguishing Media
Dry sand may be used on small fires.
Do not use water jet.
Extinguishing Media - Not suitable
Combustion will produce smoke,carbon dioxide and carbon monoxide.
Special Hazards of Product
Wear full protective clothing and self-contained breathing apparatus.
Protective Equipment for Fire-Fighting
ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing. Eliminate all sources of ignition.
Personal Precautions
Try to prevent the material from entering drains or water courses.
Environmental Precautions and
Clean-up Methods
Contain and absorb using earth, sand or other inert material.
Spillages
Transfer into suitable containers for recovery or disposal.
HANDLING AND STORAGE
Exposure by inhalation or skin contact should be minimised by good
Handling
Industrial Hygenie practices.
Use in well ventilated area. Avoid inhaling vapour.
Avoid contact with eyes, skin and clothing.
Storage area should be: cool. dry. well ventilated. out of direct sunlight.
Storage
Store away from sources of heat or ignition.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits - GB
1) Xylene UK EH40: OES 50ppm (220mg/m3) 8h TWA.
UK EH40: OES 100ppm (441mg/m3) 15min STEL
2) Cyclohexanone UK EH40: OES 10ppm 8h TWA.
UK EH40: OES 20ppm 15min STEL
3) 2-Methylpropan-1-ol UK EH40: OES 50ppm (154mg/m3) 8h TWA.
UK EH40: OES 75ppm (231mg/m3) 15min STEL
4) Ethyl benzene UK EH40: OES 100ppm (441mg/m3) 8h TWA.
UK EH40: OES 125ppm (552mg/m3) 15min STEL
Use of the basic principles of Industrial Hygiene will enable this
Engineering Control Measures
material to be used safely.
Adequate ventilation should be provided to maintain solvent
Respiratory Protection
concentrations in the workplace below exposure limits.
Respiratory protection if there is a risk of exposure to high vapour
concentrations.
Wear suitable impervious gloves. (butyl / nitrile type)
Hand Protection
Chemical goggles.
Eye Protection
PHYSICAL AND CHEMICAL PROPERTIES
Liquid.
Physical State
Various
Color
Solvent
Odor
Not applicable.
pH
25
Flash Point 癈
Immiscible.
Solubility - Water
Approx. 1300 at 20 癈.
Density (kg/m3)
Mobile liquid at ambient temperatures.
Viscosity ( at 20癈 )
CM Version - 2 Page: 2/4
SAFETY DATA SHEET
Sikafloor 2430 Part A
Date of issue - 24/04/2002. SKFL243A
STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Contains volatile solvent.
Sources of ignition.
Conditions to avoid
Extremes of temperature.
Combustion will generate: oxides of carbon. acrid smoke and irritating
Hazardous Decomposition Products
fumes.
TOXICOLOGICAL INFORMATION
Low order of acute toxicity.
Acute toxicity
Excessive exposure may produce anaesthetic or narcotic effects.
Liquid and vapour can cause irritation on contact and at high
Eye irritation
concentrations.
Frequent skin contact may cause irritation and defatting due to the
Skin irritation
solvent content.
Harmful by absorption through the skin.
ECOLOGICAL INFORMATION
The product is insoluble in water.
Mobility
The product is expected to be not readily biodegradable.
Persistence/degradability
This material is harmful to aquatic organisms.
Ecotoxicity
DISPOSAL
Dispose of as Special Waste.
Product Disposal
Arrange for disposal via a licensed waste contractor.
Dispose of containers with care. Empty containers may contain
Container Disposal
hazardous residues.
Empty packaging should be removed by a licensed waste contractor.
TRANSPORT INFORMATION
1263
UN : UN number
Paint
UN : Proper shipping name
3.3
UN : Class
3
UN : Packing Group
Paints - flash point between 21癈 and 55癈.
ADR/RID :
Proper shipping name
3
ADR/RID :
Class
31c
ADR/RID :
Item Number
30
ADR/RID :
Hazard Identification Number
Paint.
IMDG : Proper shipping name
3
IMDG : Packing Group
3.3
IMDG : Class
3-05
IMDG : Ems Number
Paint.
IATA : Proper shipping name
3
IATA : Packing Group
3
IATA : Class
CM Version - 2 Page: 3/4
SAFETY DATA SHEET
Sikafloor 2430 Part A
Date of issue - 24/04/2002. SKFL243A
REGULATORY INFORMATION
Harmful
Label Requirements
Flammable.
Risk Phrases
Irritating to skin.
Harmful by inhalation and in contact with skin.
Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
Wear suitable protective clothing and gloves.
Safety Phrases
Use only in well-ventilated areas.
OTHER INFORMATION
10.11.1997
First Issue Date
Main Hazards
Revisions Highlighted
R Phrases
S Phrases
Exposure controls/personal protection
Customers are urged to ensure that the product is entirely suitable for
Uses and Restrictions
their own purpose.It is the customer`s responsibilty to ensure that a
suitable and sufficient assessment of the risks created by the use of
the product is undertaken.
Health and Safety at Work etc Act, 1974, and relevant Statutory
UK Legislation
Provisions.
Chemicals (Hazard Information and Packaging) Regulations, 2002.
SI 1999/437: The Control of Substances Hazardous to Health
Regulations
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care) Regulations.
General Approved Code of Practice to COSHH Regulations, HSE.
UK Guidance Publications
EH40, Occupational Exposure Limits, HSE. Revised Annually.
The information contained in this SDS corresponds to our level of
Footnote
knowledge at the time of publication.All warranties are excluded.Our
most current General Sales Conditions shall apply. Please consult the
Technical Data Sheet prior to use.
SAFETY DATA SHEET
Sikafloor 2430 Part B
Date of issue - 14/02/2002. SKFL243B
PRODUCT AND COMPANY IDENTIFICATION
Product Code SKFL243B
Product Name Sikafloor 2430 Part B
2-component solvented epoxy resin based protective coating for floors
Product Description
and walls.
Sika Limited
Manufacturer/Supplier
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component Concentration Classification Risk Phrases
1) 1 methoxy-2-propanol 107-98-2 25.00% - 50.00% - R10
2) Xylene 1330-20-7 10.00% - 25.00% Xn R10, R20/21, R38
3) Diethylenetriamine 111-40-0 2.50% - 10.00% C R21/22, R34, R43
4) Solvent Naptha (Petroleum),Light Aromatic. 64742-95-6 2.50% - 10.00% Xn, N R10, R37, R51/53,
R65, R66, R67
5) Ethyl benzene 100-41-4 2.50% - 10.00% F, Xn R11, R20
6) 2-Methylpropan-1-ol 78-83-1 2.50% - 10.00% Xi R10, R37/38, R41,
R67
7) Trimethylhexamethylene diamine 25620-58-0 1.00% - 2.50% C R22, R34, R43,
R52/53
HAZARD IDENTIFICATION
Flammable.
Main Hazards
Harmful by inhalation and in contact with skin.
Irritating to eyes and skin.
May cause sensitisation by skin contact.
Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
FIRST AID MEASURES
Immediately flood the eye with plenty of water for at least 15 minutes,
Eye Contact
holding the eye open.
Obtain medical attention urgently.
Wash skin thoroughly with soap and water.
Skin Contact
Solvents should not be used to clean skin because they may increase
the penetration of the material.
Contaminated clothing should be washed or dry-cleaned before re-use.
Obtain medical attention if blistering occurs or redness persists.
Do not induce vomiting.
Ingestion
Obtain medical attention.
Remove from exposure. Obtain medical attention.
Inhalation
CM Version - 2 Page: 1/4
SAFETY DATA SHEET
Sikafloor 2430 Part B
Date of issue - 14/02/2002. SKFL243B
FIRE FIGHTING MEASURES
Use foam, dry chemical or carbon dioxide.
Extinguishing Media
Dry sand may be used on small fires.
Do not use water jet.
Extinguishing Media - Not suitable
Thermal decomposition or burning may release oxides of carbon,
Special Hazards of Product
nitrogen and other toxic gases and vapours.
Wear full protective clothing and self-contained breathing apparatus.
Protective Equipment for Fire-Fighting
ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing. Eliminate all sources of ignition.
Personal Precautions
Try to prevent the material from entering drains or water courses.
Environmental Precautions and
Clean-up Methods
Contain and absorb using earth, sand or other inert material.
Spillages
Transfer into suitable containers for recovery or disposal.
HANDLING AND STORAGE
Exposure by inhalation or skin contact should be minimised by good
Handling
Industrial Hygenie practices.
Use in well ventilated area. Avoid inhaling vapour.
Avoid contact with eyes, skin and clothing.
Storage area should be: cool. dry. well ventilated. out of direct sunlight.
Storage
Store away from sources of heat or ignition.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits - GB
1) Xylene UK EH40: OES 100ppm (441mg/m3) 8h TWA.
UK EH40: OES 150ppm (662mg/m3) 15min STEL
2) Ethyl benzene UK EH40: OES 100ppm (441mg/m3) 8h TWA.
UK EH40: OES 125ppm (552mg/m3) 15min STEL
3) 1 methoxy-2-propanol UK EH40: OES 100ppm (375mg/m3) 8h TWA.
UK EH40: OES 300ppm (1120mg/m3) 15min STEL
4) 2-Methylpropan-1-ol UK EH40: OES 50ppm (154mg/m3) 8h TWA.
UK EH40: OES 75ppm (231mg/m3) 15min STEL
5) Diethylenetriamine UK EH40: OES 1ppm (4.3mg/m3) 8h TWA.
Use of the basic principles of Industrial Hygiene will enable this
Engineering Control Measures
material to be used safely.
Adequate ventilation should be provided to maintain solvent
Respiratory Protection
concentrations in the workplace below exposure limits.
Respiratory protection if there is a risk of exposure to high vapour
concentrations.
Wear suitable impervious gloves.
Hand Protection
Chemical goggles.
Eye Protection
PHYSICAL AND CHEMICAL PROPERTIES
Liquid.
Physical State
Clear.
Color
Ammoniacal.
Odor
11 at 50 % w/w in water.
pH
26
Flash Point 癈
Partially soluble.
Solubility - Water
Approx. 1000 at 20 癈.
Density (kg/m3)
Mobile liquid at ambient temperatures.
Viscosity ( at 20癈 )
CM Version - 2 Page: 2/4
SAFETY DATA SHEET
Sikafloor 2430 Part B
Date of issue - 14/02/2002. SKFL243B
STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Contains volatile solvent.
Sources of ignition.
Conditions to avoid
Extremes of temperature.
Combustion will generate: oxides of carbon. oxides of nitrogen. acrid
Hazardous Decomposition Products
smoke and irritating fumes.
TOXICOLOGICAL INFORMATION
Low order of acute toxicity.
Acute toxicity
Excessive exposure may produce anaesthetic or narcotic effects.
Liquid and vapour can cause irritation on contact and at high
Eye irritation
concentrations.
Frequent skin contact may cause irritation and defatting due to the
Skin irritation
solvent content.
The possibility of allergic sensitisation should be considered.
Sensitization - Skin
ECOLOGICAL INFORMATION
A major part of the product will dissolve slowly in water.
Mobility
The product is expected to be not readily biodegradable.
Persistence/degradability
The product may be harmful to aquatic organisms.
Ecotoxicity
DISPOSAL
Dispose of as Special Waste.
Product Disposal
Arrange for disposal via a licensed waste contractor.
Dispose of containers with care. Empty containers may contain
Container Disposal
hazardous residues.
Empty packaging should be removed by a licensed waste contractor.
TRANSPORT INFORMATION
1263
UN : UN number
Paint
UN : Proper shipping name
3.3
UN : Class
3
UN : Packing Group
1263
ADR/RID :
Substance Identification
Number
Paints - flash point between 21癈 and 55癈.
ADR/RID :
Proper shipping name
3
ADR/RID :
Class
31c
ADR/RID :
Item Number
30
ADR/RID :
Hazard Identification Number
Paint.
IMDG : Proper shipping name
3
IMDG : Packing Group
3.3
IMDG : Class
3-05
IMDG : Ems Number
310 313
IMDG : MFAG Number
Paint.
IATA : Proper shipping name
3
IATA : Packing Group
CM Version - 2 Page: 3/4
SAFETY DATA SHEET
Sikafloor 2430 Part B
Date of issue - 14/02/2002. SKFL243B
3
IATA : Class
REGULATORY INFORMATION
Harmful
Label Requirements
Flammable.
Risk Phrases
Harmful by inhalation and in contact with skin.
Irritating to eyes and skin.
May cause sensitisation by skin contact. Harmful to aquatic organisms,
may cause long-term adverse effects in the aquatic environment.
Do not breathe gas/fumes/vapour/spray.
Safety Phrases
Avoid contact with skin.
In case of insufficient ventilation, wear suitable respiratory equipment.
Use only in well ventilated areas.
If swallowed seek medical advice immediately and show this container
or label.
OTHER INFORMATION
10.11.1997
First Issue Date
Main Hazards
Revisions Highlighted
Regulatory information
Customers are urged to ensure that the product is entirely suitable for
Uses and Restrictions
their own purpose.It is the customer`s responsibilty to ensure that a
suitable and sufficient assessment of the risks created by the use of
the product is undertaken.
Health and Safety at Work etc Act, 1974, and relevant Statutory
UK Legislation
Provisions.
SI 1993/1746: Chemicals (Hazard Information and Packaging)
Regulations, 1993.
SI 1999/437: The Control of Substances Hazardous to Health
Regulations
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care) Regulations.
General Approved Code of Practice to COSHH Regulations, HSE.
UK Guidance Publications
EH40, Occupational Exposure Limits, HSE. Revised Annually.
The information contained in this SDS corresponds to our level of
Footnote
knowledge at the time of publication. All warranties are excluded. Our
most current General Sales Conditions shall apply. Please consult the
Technical Data Sheet prior to use.
|