MATERIAL SAFETY DATA SHEET
Date Prepared: February 1, 2008
1. PRODUCT/COMPANY IDENTIFICATION
Product Name: Product No:
? 201126 & 201125
BONSAL B-2000 Wall & Floor Adhesive
201126 & 201125
ProSpec?B-2000 Wall & Floor Adhesive
Emergency Telephone: Manufacturer's Name & Address:
800-424-9300 (Chemtrec) or Bonsal American Inc./ an Oldcastle company
703-527-3887 (Outside USA) 8201 Arrowridge Blvd
Charlotte, NC 28273
Telephone Number for Information:
704-525-1621
2. EMERGENCY AND FIRST AID
This product is a heavy bodied water-based product. Inhalation
EMERGENCY INFORMATION:
may cause irritation to the moist mucous membranes of the nose,
throat and upper respiratory system or may cause or may
aggravate certain lung diseases or conditions.
Immediately flush eye thoroughly with water. Continue flushing
EYES:
eye for at least 15 minutes, including under lids, to remove all
particles. Get medical attention if irritation occurs.
Wash skin with water and soap or a mild detergent. Seek medical
SKIN:
treatment if irritation or inflammation develops.
Remove person to fresh air. If breathing is difficult, administer
INHALATION:
oxygen. If not breathing, give artificial respiration. Seek medical
help if coughing and other symptoms do not subside.
Do not induce vomiting. Call a physician immediately.
INGESTION:
2/1/08 Bonsal?B-2000 Wall & Floor Adhesive Page 1 of 6
?br>
ProSpec B-2000 Wall & Floor Adhesive
3. COMPOSITION INFORMATION
This product is a heavy body liquid. Its major components are:
DESCRIPTION:
Polymer Solids 10-20% Proprietary
Ethylene Glycol 1-4% CAS #107-21-1
Calcium Carbonate 55-65% CAS # 471-34-1
Stoddard Solvent 6-12% CAS # 8052-41-3
4. HAZARDOUS INGREDIENTS
COMPONENT OSHA PEL ACGIH TLV-TWA NIOSH REL
(8-Hour TWA) (1995-1996) (8-Hour TWA)
-------------------- ------------------------- ------------------------ ------------------------
50 ppm 100 ppm
Ethylene Glycol
(CAS # 107-21-1)
100 ppm 100 ppm
Stoddard Solvent
(CAS # 8052-41-3)
1,2,4 Trimethylbenzene 25 ppm 25 ppm
(CAS # 95-63-6)
25 ppm 25 ppm
1,3,4 Trimethylbenzene
(CAS # 108-67-3)
TRACE INGREDIENTS:
Due to the use of substances mined from the earth's crust, trace amounts of naturally occurring, potentially
harmful constituents may be detected during chemical analysis. Metals maybe present in trace substitutions
within the principal minerals.
Due to variations in the Stoddard Solvent, trace amounts of 1,2,4 Trimethylbenzene (CAS # 95-63-6) and
Trimethylbenzene (CAS # 108-67-8) maybe present in finished product.
5. HAZARD IDENTIFICATION
NOTE: Potential health effects may vary depending upon the
POTENTIAL HEALTH EFFECTS:
duration and degree of exposure. To reduce or eliminate health
hazards associated with this product, use exposure controls or
personal protection methods as described in Section 10.
(Acute/Chronic) Exposure to product may cause immediate or
EYE CONTACT:
delayed irritation or inflammation of the cornea. Eye contact by
larger amounts or splashes of wet product may cause effects
ranging from slight to moderate eye irritation.
(Acute) Exposure to product may cause drying of the skin with
SKIN CONTACT:
consequent mild irritation or more significant effects attributable
to aggravation of other conditions. Discomfort or pain cannot be
2/1/08 Bonsal?B-2000 Wall & Floor Adhesive Page 2 of 6
?br>
ProSpec B-2000 Wall & Floor Adhesive
relied upon to alert a person to a hazardous skin exposure.
(Chronic) Product coming in contact with skin may cause skin
irritation. Prolonged exposure can cause skin damage.
(Acute/Chronic) Some individuals may exhibit an allergic
response upon exposure to product. The response may appear in
a variety of forms ranging from a mild rash to severe irritation.
(Acute) Exposure to product may cause irritation to the moist
INHALATION:
mucous membranes of the nose, throat and upper respiratory
system. Pre-existing upper respiratory and lung diseases may be
aggravated by inhalation of product.
(Acute/Chronic) Internal discomfort or ill effects are possible if
INGESTION:
large quantities are swallowed.
Product is not recognized as a carcinogen by NTP, OSHA, or
CARCINOGENIC POTENTIAL:
IARC. However, it may contain trace amounts of ingredients
recognized as carcinogens by these organizations.
NOTE: This product contains petroleum distallates.
6. ACCIDENTAL RELEASE MEASURES
Contain material to prevent contamination of soil, surface water or ground water. Use dry clean-up methods that do
not disperse dust into the air or entry into surface water. Material can be used if not contaminated. Place in an
appropriate labeled container for disposal or use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in Section 12.
7. PHYSICAL/CHEMICAL DATA
Viscous paste
APPEARANCE/ODOR: PHYSICAL STATE:
White / Acrylic odor
Not determined
BOILING POINT: MELTING POINT:
136?F (66?C)
Not determined Not determined
VAPOR PRESSURE: VAPOR DENSITY:
7.5-9.5 Soluble
pH SOLUBILITY IN WATER:
1.4-1.6 Not determined
SPECIFIC GRAVITY EVAPORATION RATE:
(H2O = 1.0):
< 35%
VOLATILE: (%Vol)
8. FIRE AND EXPLOSION
Unknown LOWER EXPLOSIVE LIMIT: Not available
FLASH POINT:
Unknown UPPER EXPLOSIVE LIMIT: Not available
AUTO IGNITION
2/1/08 Bonsal?B-2000 Wall & Floor Adhesive Page 3 of 6
?br>
ProSpec B-2000 Wall & Floor Adhesive
TEMPERATURE:
Unknown SPECIAL FIRE FIGHTING Water spray may be ineffective.
FLAMMABLE LIMITS
PROCEDURES: Water spray may be used to cool
closed containers to prevent
pressure build-up and possible
autoignition or explosion when
exposed to extreme heat. If water
is used, fog apparatus and full
protective clothing.
Use extinguishers UNUSUAL FIRE AND Keep this product away from
EXTINGUISHING
appropriate for EXPLOSION HAZARDS: heat, sparks, flame, and other
MEDIA:
surrounding fire. sources of ignition (i.e., pilot
lights, electric motors, static
electricity). Invisible vapors can
travel to a source of ignition and
flash back. Do not smoke while
using this product. Keep
containers tightly closed when not
in use. Closed containers may
explode when overheated. Do not
apply to hot surfaces. Toxic
gases may form when this
product comes in contact with
extreme heat.
None
HAZARDOUS
COMBUSTION
PRODUCTS:
9. STABILITY AND REACTIVITY DATA
Product is normally stable at ambient temperatures and
STABILITY:
pressures.
Avoid contact with strong alkalies, strong mineral acids, or
INCOMPATIBILITY (MATERIALS AND
strong oxidizing agents.
CONDITIONS TO AVOID):
May produce the following hazardous decomposition products
HAZARDOUS DECOMPOSITION:
when exposed to extreme heat: carbon monoxide; carbon
dioxide; lower molecular weight polymer fractions; Extreme heat
includes, but is not limited to, flame cutting, brazing, and
welding.
Will not occur.
HAZARDOUS POLYMERIZATION:
10. PRECAUTIONS FOR HANDLING AND STORAGE
Keep dry until used. Handle and store in a manner so that
HANDLING AND STORAGE
airborne dust does not exceed applicable exposure limits. Use
2/1/08 Bonsal?B-2000 Wall & Floor Adhesive Page 4 of 6
?br>
ProSpec B-2000 Wall & Floor Adhesive
adequate ventilation and dust collection. Use exposure control
and personal protection methods as described in Section 10.
Use dry clean-up methods that do not disperse dust into the air or
SPILLS:
entry into surface water. Material can be used if not
contaminated. Place in an appropriate container for disposal or
use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in
Section 10.
11. TOXICOLOGICAL INFORMATION
See Section 5 for Hazard Identification. No recognized unusual toxicity to plants and animals.
Conditions aggravated by exposure: Eye disease, Skin disorders and Chronic Respiratory conditions.
12. EXPOSURE CONTROLS/PERSONAL PROTECTION
Use local exhaust or general dilution ventilation to control below
RESPIRATORY PROTECTION:
applicable exposure limits. Avoid breathing vapor.
If local or general ventilation is not adequate to control levels
below applicable exposure limits or when irritation or discomfort
occurs, use MSHA/NIOSH approved respirators.
Wear safety glasses with side shields or goggles to avoid contact
EYE PROTECTION:
with the eyes. In unpredictable environments, wear tight-fitting
unvented or indirectly vented goggles to avoid eye irritation or
injury. Contact lenses should not be worn when handling this
product.
Wear impervious abrasion- and alkali-resistant gloves, long-
SKIN PROTECTION:
sleeved shirt, long pants or other protective clothing to prevent
skin contact. Promptly remove clothing with dry product or
clothing dampened with moisture mixed with product, and
launder before re-use. If contact occurs, wash areas contacted by
material with soap and water.
13. DISPOSAL CONSIDERATIONS
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND
DISPOSAL:
OR INTO ANY BODY OF WATER. All disposal methods must
be in compliance with all Federal, State/ Provincial and local
laws and regulations of unusable or contaminated materials.
Regulations may vary in different locations. Waste
characterizations and compliance with applicable laws are the
responsibility solely of the waste generator. Dispose of
packaging/containers according to local, state and federal
regulations.
2/1/08 Bonsal?B-2000 Wall & Floor Adhesive Page 5 of 6
?br>
ProSpec B-2000 Wall & Floor Adhesive
IF THIS MATERIAL AS PACKAGED, BECOMES A WASTE, IT DOES NOT MEET THE CRITERIA FOR A HAZARDOUS
WASTE AS DEFINED BY THE ENVIRONMENTAL PROTECTION AGENCY UNDER THE AUTHORITY OF THE RESOURCE
CONSERVATION AND RECOVER ACT (40CFR 261), DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
14. TRANSPORTATION DATA
Proper Shipping Name (DOT): Adhesives/ Epoxies ?Non-flammable, Non-Hazardous.
15. OTHER REGULATORY INFORMATION
Product is considered a hazardous chemical under this regulation
Status under US OSHA Hazard
and should be included in the employer's hazard communication
Communication Rule 29 CFR 1910.1200:
program.
16. OTHER INFORMATION
The information and recommendations contained herein are based upon data believed to be correct. However, no
guarantee or warranty of any kind, express or implied, is made with respect to the information contained herein. It is
the user's obligation to determine the conditions of safe use of this product.
2/1/08 Bonsal?B-2000 Wall & Floor Adhesive Page 6 of 6
?br>
ProSpec B-2000 Wall & Floor Adhesive
|