BRIWAX
Material Safety Data Sheet
INT鈥橪., INC.
This Data Sheet contains Important
!! Information. BY APPOINTMENT TO
READ AND KEEP FOR REFERENCE. H.M. QUEEN ELIZABETH II
MANUFACTURERS OF
Instructions FRENCH POLISHES & LAQUERS
J W BOLLOM & CO. LTD.
T/A HENRY FLACK (1860) LTD
1.0 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: 2032 BRIWAX Touch-Up Pen
Product Code: 2032
Manufacturer/Supplier:
BRIWAX International Inc. 2222 Spring Creek Parkway
P.O. Box 865110 Suite 105
Plano, TX 75086-5110 Plano, TX 75023
1-800-5-BRIWAX
Fax: 972-867-8960
Transportation Emergencies: Call Chemtrec, 1-800-424-9300
Revision Number: 1
Description: BRIWAX Touch-Up Pen
2.0 COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name % CAS # OSHA Exposure Limits
No hazardous components
Components not listed are not physical or health hazards as defined in 29 CFR 1910.1200 (Hazard Communication Standard).
3.0 HAZARDS IDENTIFICATION
Emergency Overview: No eye hazard. Not a skin hazard. Combustible at elevated temperatures.
No hazard in normal industrial use.
Inhalation Irritation
No hazard in normal industrial use.
Skin Contact
No hazard in normal industrial use.
Eye Contact
No hazard in normal industrial use.
Ingestion Irritation
Routes of Entry: None Known
Target Organs Potentially Affected by Exposure: No organs known to be damaged from exposure to this product.
Medical Conditions Aggravated by Exposure: No medical conditions affected by exposure.
Chemical Interactions That Change Toxicity: None Known
None of the substances have been shown to cause cancer in long term animal studies. Not a
Carcinogenicity
carcinogen according to NTP, IARC, OSHA.
No data available to indicate product or any components present at greater than 0.1% may cause
Reproductive and Developmental
birth defects.
Toxicity
No data available to indicate product or any components present at greater than 0.1% is
Mutagenicity
mutagenic or genotoxic.
P.O. Box 865110 Plano, TX 75086
http://www.briwax.com
Copyright 2004, BRIWAX Int鈥檒, Inc.
4.0 FIRST AID MEASURES
This material does not present a hazard if inhaled. Remove individual to fresh air after
Inhalation
an airborne exposure if any symptoms develop, as a precautionary measure. If symp-
toms are experienced, remove source of contamination or move individual to fresh air
and obtain medical advice.
None expected to be needed, however, use an eye wash to remove a chemical from
Eyes
your eye regardless of the level of hazard.
Wash with soap and water. Remove contaminated clothing and launder. Get
Skin Contact
medical attention if irritation develops or persists. Do not use solvents to remove prod-
uct residues from skin.
No hazard in normal industrial use. Do not induce vomiting. Seek medical attention if
Ingestion
symptoms develop. Provide medical care provider with this MSDS. Never give any-
thing by mouth to an unconscious person.
No additional first aid information available.
Notes To Doctor
5.0 FIRE FIGHTING MEASURES
6.0 ACCIDENTAL RELEASE MEASURES
Flammability Summary: Not combustible
Alcohol foam; Carbon dioxide; Dry chemical; Water spray
Extinguishing Media
Material will not ignite or burn.
Fire and/or Explosion Hazards
Do not enter fire area without proper protection including self-contained breathing appa-
Fire Fighting Methods and Protection
ratus and full protective equipment. Use methods for the surrounding fire.
Carbon dioxide; Carbon monoxide
Hazardous Combustion Products
No data. Material will not flash.
Flash Point
7.0 HANDLING AND STORAGE
No adverse health affects expected from the clean-up of spilled material. Follow per-
Personal Precautions and Equipment
sonal protective equipment recommendations found in Section 8 of this MSDS.
No special spill clean-up considerations. Collect and discard in regular trash. Do not
Methods for Clean-up
allow the spilled product to enter public drainage system or open waterways.
No special handling instructions due to toxicity. As with all chemicals, good
Handling Technical Measures
industrial hygiene practices should be followed when handling this material.
and Precautions
Keep container closed when not in use. Avoid freezing to prevent bursting of the con-
Storage Technical Measures
tainer.
and Conditions
P.O. Box 865110 Plano, TX 75086
http://www.briwax.com
Copyright 2004, BRIWAX Int鈥檒., Inc.
8.0 EXPOSURE CONTROLS/PERSONAL PROTECTION
No exposure limits exist for the constituents of this product. General room
Engineering Measures
ventilation might be required to maintain operator comfort under normal
conditions of use.
No respiratory protection required under normal conditions of use. If ventilation is
Respiratory Protection
not sufficient to effectively prevent buildup of vapor/mist/fume/dust,
appropriate NIOSH/MSHA respiratory protection must be provided.
Wear safety glasses when handling this product.
Eye Protection
Wear protective gloves. Inspect the gloves for chemical break-through and re-
Skin Protection
place at regular intervals. Clean protective equipment reguarly. Wash hands and
other exposed areas with mild soap and water before eating, drinking, and when
leaving work. Where use can result in skin contact, practice good personal
hygiene.
Nitrile Neoprene, Natural latex
Gloves
Control Parameters:
Chemical Name ACGIH TLV-TWA ACGIH STEL IDLH
None
9.0 PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Physical State
Depends upon product selection. The color additives do not affect product hazards.
Color
Mild Characteristic
Odor
7
pH
Moderate; 50-99%
Solubility in Water
87.0
Volatiles, % by weight
680
Volatile Organic Chemicals (g/L)
100 deg. C
Boiling Point
72 deg. C
Melting Point
0.91
Specific Gravity
P.O. Box 865110 Plano, TX 75086
http://www.briwax.com
Copyright 2004, BRIWAX Int鈥檒., Inc.
10.0 STABILITY AND REACTIVITY
Stable under normal conditions.
Stability
Temperatures above the high flash point of this combustible material in combina-
Conditions to Avoid
tion with sparks, open flames, or other sources of ignition.
Strong oxidizing agents; Strong acids; Strong alkalies
Materials to Avoid/Chemical Incompatibility
Carbon dioxide; Carbon monoxide; Nitrogen containing gases, Smoke.
Hazardous Decomposition Products
11.0 TOXICOLOGICAL INFORMATION
Component Toxicology Data (NIOSH):
Chemical Name CAS # LD50/LC50
No data available
Oral LD50 Rat> 15000 mg/kg
Ingestion
12.0 ECOLOGICAL INFORMATION
Overview: This material is not expected to be harmful to the ecology. Keep out of waterways.
13.0 DISPOSAL CONSIDERATIONS
Spent or discarded material is non-hazardous according to environmental regula-
Waste Description for Spent Product
tions. Mixing spent or discarded material with other materials may render the
mixture hazardous. Perform a hazardous waste determination on mixtures.
Dispose of in a landfill. Disposal is not likely to be regulated.
Disposal Methods
14.0 TRANSPORTATION INFORMATION
DOT Basic Description: DOT & IATA: Not restricted.
15.0 REGULATORY INFORMATION
TSCA Status: All components in this product are on the TSCA Inventory.
Chemical Name CAS # Regulation % Range
No 313-listed chemicals in this product SARA 313
16.0 ADDITIONAL INFORMATION
Prepared by Thomas J. Lewis Ph.D.
Other Info
The information contained in this safety data sheet is provided in accordance with
Disclaimer
the requirements of OSHA Hazard Communication (29 CFR 1910.1200). The
product should not be used for purposes other than those shown in Section 1
without first referring to the supplier and obtaining written instructions. As the
specific conditions of use of the product are outside of the suppliers control, the
user is responsible for ensuring that the requirements of relevant legislation are
complied with.
The information contained in this Material Safety Data Sheet is based on the
present state of knowledge and current national legislation. It provides guidance
on health, safety and environmental aspects of the product and should not be
construed as any guarantee of technical performance as suitability for particular
applications.
P.O. Box 865110 Plano, TX 75086
http://www.briwax.com
Copyright 2004, BRIWAX Int鈥檒.,Inc.
|