MATERIAL SAFETY DATA SHEET # 4
SECTION 1 鈥? MATERIAL IDENTIFICATION
MATERIAL NAME HAZARD RATING
IDENTIFIER
(MAX 4) (MIN 0)
GLASS CLEANER
MANUFACTURER'S SUPPLIER'S
0 1
NAME NAME
BROOKS INDUSTRIES LTD.
BROOKS INDUSTRIES LTD.
STREET STREET
ADDRESS ADDRESS
FLAMMABILITY REACTIVITY
108 NEW HOPE DRIVE 108 NEW HOPE DRIVE
CITY PROVINCE CITY PROVINCE
1 0
CRYSTAL CITY MB CRYSTAL CITY MB
POSTAL EMERGENCY POSTAL EMERGENCY
CODE TELEPHONE CODE TELEPHONE
NUMBER NUMBER
R0K 0N0 (204) 873-2475 R0K 0N0 (204) 873-2475 HEALTH PERSONAL
PROTECTION
CHEMICAL CHEMICAL CHEMICAL
NAME FAMILY FORMULA
Detergent Surfactant Mixture
MOLECULAR TRADE NAME MATERIAL
WEIGHT AND SYNONYMS USE
Cleaning Glass
Mixture Glass Cleaner
SECTION 2 鈥? PREPARATION INFORMATION
DATE OF PREPARATION TELEPHONE NUMBER
Peter Mladenovich (LN 387264-05)
PREPARED BY
May 17, 2005 (905) 812-3856
Cambridge Materials Testing Ltd.
SECTION 3 鈥? HAZARDOUS INGREDIENTS OF MATERIAL
APPROXIMATE C.A.S. NUMBER
HAZARDOUS INGREDIENTS CONCENTRATION OR EXPOSURE LIMITS LD50/LC50
% U.N. NUMBERS (SPECIFY SPECIES & ROUTE)
Edeticacid (EDTA) 0.1-5 60-00-4 Not Listed LD50, Oral, Rat = > 90 mg/kg
2 mg/m3
Potassium Hydroxide 0.1-5 1310-58-3 LD50, Oral, Rat = 365 mg/kg
Water 90-99 7732-18-5 - -
WHMIS HAZARD CLASS SYMBOL (FOR WHMIS LABELS)
A _____ B _____ C ___ D1 __ D2 X D3 _____ E_______ F______
MSDS NUMBER 4 MSDS SHEET 1 of 3
SECTION 4-PHYSICAL DATA FOR MATERIAL M.S.D.S. # 4
PHYSICAL STATE ODOUR THRESHOLD (ppm) SPECIFIC GRAVITY
ODOUR & APPEARANCE
Pleasant-smelling,
LIQUID X
GAS SOLID Not Available Approximately 1.05
blue liquid
VAPOUR PRESSURE VAPOUR DENSITY (AIR*I) EVAPORATION RATE BOILING POINT (掳C) FREEZING POINT (掳C)
Not Available Not Available Not Available Not Available Not Available
SOLUBILITY IN WATER (20掳c) % VOLATE BY VOLUME pH DENSITY (g/ml) COEFFICIENT OF
OIL/WATER DISTRIBUTION
Completely Soluble Approximately 99 11.2 Approximately 1.05
Not Available
SECTION 5-FIRE AND EXPLOSION HAZARD OF MATERIAL
FLAMMABILITY IF YES, UNDER WHAT
NO X
YES CONDITIONS Water Solution 鈥? Not Flammable
MEANS OF EXTINCTION
Water, Carbon Dioxide, Foam, Dry Chemical or any other extinguisher.
SPECIAL PROCEDURES
Use self contained breathing apparatus and full protective clothing.
HAZARDOUS COMBUSTION PRODUCTS
Carbon Dioxide and Carbon Monoxide.
FLASHPOINT (掳c) & METHOD UPPER EXPLOSION LIMIT (% BY VOLUME) LOWER EXPLOSION LIMIT (% BY VOLUME)
Not Available Not Available Not Available
AUTOIGNITION TEMPERATURE (掳c) TDG FLAMMABILITY CLASSIFICATION SENSITIVITY TO STATIC DISCHARGE
Not Available Not Flammable but Combustible Not Sensitive
EXPLOSIVE SENSITIVITY TO RATE OF BURNING EXPLOSIVE POWER
MECHANICAL IMPACT Not Sensitive
Not Available Not Explosive
SECTION 6-REACTIVITY DATA FOR MATERIAL
CHEMICAL STABILITY IF YES, UNDER WHAT
X
YES NO CONDITIONS Material is stable at Standard Ambient Conditions
INCOMPATIBILITY TO IF YES, WHAT
OTHER SUBSTANCES SUBSTANCES
The material is not compatible with strong oxidizing agents.
YES NO
X
REACTIVITY, UNDER WHAT CONDITIONS
The material will react with strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Carbon Dioxide and Carbon Monoxide.
SECTION 7-TOXICOLOGICAL PROPERTIES OF PRODUCTS
ROUTES OF ENTRY
X X X X X
SKIN CONTACT SKIN ABSORPTION EYE CONTACT INHALATION ACUTE INHALATION CHRONIC INGESTION
EFFECTS OF ACUTE EXPOSURE
- The material will cause eye irritation on contact.
- Prolonged and/or repeated skin contact with the material may cause irritation leading to dermatitis.
- Inhalation of mist may cause irritation of respiratory system.
- Ingestion of the material may cause irritation of the digestive tract and stomach pain.
MSDS NUMBER 4 MSDS SHEET 2 of 3
SECTION 7-TOXICOLOGICAL PROPERTIES OF PRODUCT (CONTINUED) M.S.D.S. # 4
EFFECTS OF CHRONIC EXPOSURE
With the exception of possible development of dermatitis, no chronic physiological disorders are expected to occur after
prolonged exposure to the material.
LD50 OF PRODUCT LC50 OF PRODUCT
(SPECIFY SPECIES & ROUTE) (SPECIFY SPECIES & ROUTE)
Not Available
Not Available
IRRITANCY OF PRODUCT EXPOSURE LIMITS OF PRODUCTS
Will irritate on prolonged contact Not Available
SENSITIZATION TO PRODUCT SYNERGISTIC MATERIALS
Not Sensitizing None Known
PRODUCT IS CARCINOGEN REPRODUCTIVE EFFECTOR TERATOGEN MUTAGEN
SECTION 8-PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT TO BE GLOVES EYEWEAR FOOTWEAR
WORN (TYPE) (TYPE)
Goggles (TYPE) Rubber Boots
Impervious Gloves
RESPIRATOR CLOTHING OTHER
An eye wash station should be
(TYPE) Not Required Impervious Overalls available near-by.
ENGINEERING CONTROLS (VENTILATOR TYPE, ENCLOSED PROCESS, ETC. SPECIFY)
No special engineering controls required. Local ventilation is sufficient.
LEAK & SPILL PROCEDURES
Confine the spill by embankment with sand or any other inert material. Collect excess for reuse or
disposal, wash spill area with water.
WASTE DISPOSAL
Waste material should be disposed through an authorized waste disposal agency.
HANDLING PROCEDURES & EQUIPMENT
No special procedure or handling equipment required. Avoid spillage during handling.
STORAGE REQUIREMENTS
Store in cool place away from strong oxidants and heat sources.
SPECIAL SHIPPING INFORMATION/TDG CLASSIFICATION
Water media, not flammable / T.D.G. Not regulated.
SECTION 9-FIRST AID MEASURES
SKIN
Wash well with water. If irritation persists seek medical help.
EYE
Flush eyes with plenty of water for at least 15 minutes. Seek medical help.
INHALATION
Move to fresh air area. If breathing is difficult, give oxygen and seek medical help.
INGESTION
In case of ingestion give plenty of water to dilute the ingested material and seek medical help.
GENERAL ADVICE
Clothing items wetted with the material should be removed and washed prior to reuse.
MSDS NUMBER 4 MSDS SHEET 3 of 3
|