MATERIAL SAFETY DATA SHEET
_________________________________________________________________________________________________
NEOCOLOR ULR DEVELOPER / REPLENISHER
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Neocolor ULR Developer/Replenisher
Product Name
326298
Product Code
-
Other Names
A single part photographic colour print developer.
Product Use
Australian Photographic Engineering Pty Ltd
Importer Name
1052 Dayboro Rd
Address
Kurwongbah QLD 4503
07 3889 8272
Telephone Number
1300 727 906
Emergency Telephone
2. HAZARDS IDENTIFICATION
HAZARDOUS SUBSTANCE. NON DANGEROUS GOODS.
Classified as hazardous according to the criteria of NOHSC.
Xi 鈥? Irritant
Hazards
N - Dangerous for the environment
R43 - Harmful if swallowed.
Risk Phrases
S1/2 - Keep locked up and out of the reach of children.
Safety Phrases
S24 - Avoid contact with skin.
S37- Wear suitable gloves.
S45 - In case of accident or if you feel unwell, seek medical advice
immediately (show this MSDS where possible).
S60 - This material and its container must be disposed of as
hazardous waste.
S61 - Avoid release to the environment. Refer to special
instructions/Material Safety Data Sheets.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient (common name) CAS Number Proportion
p-Phenylenediamine derivative (CD4) 25646-77-9 1-2%
potassium carbonate 584-08-7 5-10%
4. FIRST AID MEASURES
Inhalation of the liquids is unlikely to occur. No vapour hazard exists
Inhalation
under normal conditions of use.
Rinse mouth with water and drink about two glasses of water. Do
Ingestion
not induce vomiting. Seek immediate medical attention.
Remove any contaminated clothing. Wash skin thoroughly with cold
Skin
11/12/2006 1/5
NEOCOLOR ULR DEVELOPER / REPLENISHER
MATERIAL SAFETY DATA SHEET
_________________________________________________________________________________________________
water then with a neutral cleanser and water. Thoroughly wash
contaminated clothing before re-use. Seek medical attention if
irritation develops.
Flush immediately with eye-wash solution or clean water for several
Eyes
minutes holding the eyelids apart. Seek immediate medical
attention.
5. FIRE FIGHTING MEASURES
For major fires call the Fire Brigade. Ensure that an escape path is
available from any fire.
Suitable for the surrounding fire.
Suitable Extinguishing
Media
Sulphur dioxide, oxides of nitrogen and phosphorus, phosphine 鈥?
Hazardous Combustion
PH3
Products
Self-contained respiratory equipment.
Firefighting Equipment
No information available.
Unusual Fire or
Explosion Hazards
Not applicable
Hazchem Code
6. ACCIDENTAL RELEASE MEASURES
Contain leak and spill from spreading. Wear protective clothing to
Spills
prevent contact with skin and eyes. Ensure spill area is well
ventilated. Prevent spillages from entering drain by absorption
using inert absorbent material (e.g. dry sand or earth) and transfer
to an approved container. Wash area with soap and water.
7. HANDLING AND STORAGE
Handling When handling product concentrates, avoid contact with eyes, skin
and clothing and avoid inhaling vapour. Use in a well ventilated
area. Avoid contact with the working strength solution and avoid
inhaling vapour. After handling, the routine use of a neutral, (non-
alkaline), hand cleanser will minimise the risk of adverse skin
reaction.
Store in a dry, well ventilated area at a moderate temperature.
Storage
Store away from incompatible substances.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
No exposure standards allocated.
Exposure Standards
(NOHSC)
Ensure good ventilation of the whole working area.
Engineering Controls
11/12/2006 2/5
NEOCOLOR ULR DEVELOPER / REPLENISHER
MATERIAL SAFETY DATA SHEET
_________________________________________________________________________________________________
Should not be required.
Respiratory Protection
Wear safety glasses with side-shields as the minimum level of
Eye Protection
protection.
Wear impervious gloves when handling concentrates and to
Skin Protection
prevent contact with the working strength solution.
Food, beverages and tobacco products should not be stored or
Hygienic Practices
consumed where this material is in use. Provide eyewash fountains
and safety showers in close proximity to points of potential
exposure.
9. PHYSICAL AND CHEMICAL PROPERTIES
Pale brown liquid
Appearance
Slight
Odour
Completely soluble
Solubility in water
< 0掳C
Freezing Point
10.4掳C
pH at 20掳C
1.20
Relative Density at 20掳C
Not flammable
Flammability
10. STABILITY AND REACTIVITY
Stable under recommended storage conditions.
Chemical Stability
Avoid contact with strong acids and oxidising agents. Avoid
Incompatible Materials
contact with bleach-fix (ammonia will be liberated).
None under normal conditions of use.
Hazardous Decomposition
Products
No information available.
Hazardous Polymerization
No information available.
Conditions to Avoid
11. TOXICOLOGICAL INFORMATION
Toxicity Potassium carbonate:
LD50 = 1870 mg/kg (oral-rat)
Phenylene diamine derivative:
LD50 = 400 mg/kg (oral-rat)
Inhalation, ingestion, eye and skin
Routes of Exposure
Inhalation: No vapour hazard exists under normal conditions of
Health effects from likely
use.
routes of exposure
Ingestion: Harmful if swallowed. May cause irritation of the
gastro-intestinal tract.
Eye: May cause irritation.
Skin: May cause irritation and possible allergic skin reaction.
Prolonged or repeated contact may cause allergic reaction.
Effects of Overexposure
No information available.
Existing Conditions
Aggravated by Exposure
No information available.
Carcinogenicity
11/12/2006 3/5
NEOCOLOR ULR DEVELOPER / REPLENISHER
MATERIAL SAFETY DATA SHEET
_________________________________________________________________________________________________
12. ECOLOGICAL INFORMATION
Expected to be harmful to plant and animal organisms in the
Ecotoxicity
aquatic environment.
The following summary of expected environmental effect is based
on known data for the principal ingredients and on the physical and
chemical properties of the preparation.
Concentrates: Contains material that is harmful to plant and
animal life. These properties may cause adverse environment
effects.
Working Strength Solution: The high pH and the developing
agent content will result in increased alkalinity and in toxicity to
plant and animal organisms in the aquatic environment. These
effects are rapidly reduced by the effects of dilution, oxidation and
photodecomposition and the product has little or no potential to
persist in a harmful form. The solution has a low biological oxygen
demand. As a result of the above properties, precautions should be
taken to avoid release of the product or working strength solution
into the environment.
No information available.
Mobility
13. DISPOSAL CONSIDERATIONS
Dispose according to applicable local and state government
Disposal methods and
containers regulations.
Surplus product and working strength solution: Disposal should
be in accordance with current local and state government
regulations and only by a licensed waste contractor. Do not dispose
of either concentrate or working strength solution into drains,
sewers or waterways.
Plastic containers: Rinse thoroughly with water and disposed as
solid waste to land fill or recycle where possible.
Cardboard cartons: Recycle where possible or treat as solid
waste.
Please consult your state Land Waste Management Authority for
Special precautions for
more information
landfill or incineration
14. TRANSPORT INFORMATION
Not classified as a dangerous good according to the Australian Code for the Transport of
Dangerous goods by road or rail.
Not applicable
UN Number
Not applicable
Proper Shipping Name
Not applicable
Dangerous Goods Class
Not applicable
Hazchem Code
11/12/2006 4/5
NEOCOLOR ULR DEVELOPER / REPLENISHER
MATERIAL SAFETY DATA SHEET
_________________________________________________________________________________________________
Not applicable
Packing Group
Not applicable
Special Precautions
15. REGULATORY INFORMATION
p-Phenylenediamine derivative (CD4) and potassium carbonate are listed in the Australian
Inventory of Chemical Substances (AICS).
16. OTHER INFORMATION
Rev 1.0 (11/12/2006)
Last Revision of MSDS
MSDS.COM.AU Pty Ltd www.msds.com.au
Prepared by
IARC: International Agency for Research on Cancer
Abbreviations Used
NOHSC: National Occupational Health and Safety Commission
NTP: National Toxicology Program (U.S.)
OSHA: Occupational Safety and Health Administration (U.S.)
STEL: Short term exposure limit
TWA: Time weighted average
Emergency Contacts
Australian Photographic Engineering Pty Ltd 07 3889 8272
Australian Photographic Engineering Pty Ltd 鈥? Emergency Number 1300 727 906
Police and Fire Brigade 000
Poisons Information Centre 13 11 26
The information contained in this material safety data sheet is provided in good faith and is
believed to be accurate at the date of issuance. Australian Photographic Engineering Pty Ltd
makes no representation of the accuracy or comprehensiveness of the information and to the full
extent allowed by law excludes all liability for any loss or damage related to the supply or use of
the information in this material safety data sheet. MSDS.COM.AU Pty Ltd is not in a position to
warrant the accuracy of the data herein. The user is cautioned to make their own determinations
as to the suitability of the information provided to the particular circumstances in which the product
is used.
Please read instructions / label before using product.
11/12/2006 5/5
NEOCOLOR ULR DEVELOPER / REPLENISHER
|