AUTOSKIN PRO II
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007 CHEMWATCH 6603-49
CC317SCP Version No:1
CD 2007/1 Page 1 of 6
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
AUTOSKIN PRO II
SYNONYMS
PRODUCT USE
Used as a peelable temporary film for application to a range of two- pack finishes.
SUPPLIER
Company:ScratchZero
Address:
10/14 Rothcote Crt
Burleigh Town
QLD, 4220
AUS
Telephone:+61 7 5522 1366
Fax: +61 7 5522 1799
HAZARD RATINGS
Flammability
Toxicity
Body Contact
Reactivity
Chronic
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to the Criteria of NOHSC, and the ADG Code.
POISONS SCHEDULE
None
RISK
None under normal operating conditions.
SAFETY
Safety Codes Safety Phrases
S53 Avoid exposure - obtain special instructions before use.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
resins, unregulated 20-40
N- methyl- 2- pyrrolidone 872-50-4 <5
other ingredients not contributing to the calssification balance
water 7732-18-5 >60
continued...
AUTOSKIN PRO II
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007 CHEMWATCH 6603-49
CC317SCP Version No:1
CD 2007/1 Page 2 of 6
Section 4 - FIRST AID MEASURES
SWALLOWED
路 Immediately give a glass of water.
路 First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
EYE
If this product comes in contact with eyes:
路 Wash out immediately with water.
路 If irritation continues, seek medical attention.
SKIN
If skin or hair contact occurs:
路 Flush skin and hair with running water (and soap if available).
路 Seek medical attention in event of irritation.
INHALED
路 If fumes or combustion products are inhaled remove from contaminated area.
路 Other measures are usually unnecessary.
NOTES TO PHYSICIAN
Treat symptomatically.
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
The product contains a substantial proportion of water, therefore there are no restrictions on the type of extinguishing media
which may be used. Choice of extinguishing media should take into account surrounding areas.
Though the material is non-combustible, evaporation of water from the mixture, caused by the heat of nearby fire, may produce
floating layers of combustible substances.
In such an event consider:
路 foam.
路 dry chemical powder.
路 carbon dioxide.
FIRE FIGHTING
路 Alert Fire Brigade and tell them location and nature of hazard.
路 Wear breathing apparatus plus protective gloves for fire only.
路 Prevent, by any means available, spillage from entering drains or water courses.
路 Use fire fighting procedures suitable for surrounding area.
路 DO NOT approach containers suspected to be hot.
路 Cool fire exposed containers with water spray from a protected location.
路 If safe to do so, remove containers from path of fire.
路 Equipment should be thoroughly decontaminated after use.
FIRE/EXPLOSION HAZARD
路 Non combustible.
路 Not considered to be a significant fire risk.
路 Expansion or decomposition on heating may lead to violent rupture of containers.
路 Decomposes on heating and may produce toxic fumes of carbon monoxide (CO).
路 May emit acrid smoke., carbon dioxide (CO2), other pyrolysis products typical of burning organic material.
May emit poisonous fumes.
FIRE INCOMPATIBILITY
None known.
HAZCHEM: None
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
路 Clean up all spills immediately.
路 Avoid breathing vapours and contact with skin and eyes.
continued...
AUTOSKIN PRO II
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007 CHEMWATCH 6603-49
CC317SCP Version No:1
CD 2007/1 Page 3 of 6
Section 6 - ACCIDENTAL RELEASE MEASURES
路 Control personal contact by using protective equipment.
路 Contain and absorb spill with sand, earth, inert material or vermiculite.
路 Wipe up.
路 Place in a suitable labelled container for waste disposal.
MAJOR SPILLS
Moderate hazard.
路 Clear area of personnel and move upwind.
路 Alert Fire Brigade and tell them location and nature of hazard.
路 Wear breathing apparatus plus protective gloves.
路 Prevent, by any means available, spillage from entering drains or water course.
路 Stop leak if safe to do so.
路 Contain spill with sand, earth or vermiculite.
路 Collect recoverable product into labelled containers for recycling.
路 Neutralise/decontaminate residue.
路 Collect solid residues and seal in labelled drums for disposal.
路 Wash area and prevent runoff into drains.
路 After clean up operations, decontaminate and launder all protective clothing and equipment before storing and re-using.
路 If contamination of drains or waterways occurs, advise emergency services.
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
路 Avoid all personal contact, including inhalation.
路 Wear protective clothing when risk of exposure occurs.
路 Use in a well-ventilated area.
路 Prevent concentration in hollows and sumps.
路 DO NOT enter confined spaces until atmosphere has been checked.
路 DO NOT allow material to contact humans, exposed food or food utensils.
路 Avoid contact with incompatible materials.
路 When handling, DO NOT eat, drink or smoke.
路 Keep containers securely sealed when not in use.
路 Avoid physical damage to containers.
路 Always wash hands with soap and water after handling.
路 Work clothes should be laundered separately. Launder contaminated clothing before re-use.
路 Use good occupational work practice.
路 Observe manufacturer's storing and handling recommendations.
路 Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained.
SUITABLE CONTAINER
路 Polyethylene or polypropylene container.
路 Packing as recommended by manufacturer.
路 Check all containers are clearly labelled and free from leaks.
STORAGE INCOMPATIBILITY
None known.
STORAGE REQUIREMENTS
路 Store in original containers.
路 Keep containers securely sealed.
路 Store in a cool, dry, well-ventilated area.
路 Store away from incompatible materials and foodstuff containers.
路 Protect containers against physical damage and check regularly for leaks.
路 Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source Material TWA TWA STEL STEL Peak Peak TWA
ppm mg/m鲁 ppm mg/m鲁 ppm mg/m鲁 F/CC
_________________ __________________ _____ _____ _____ _____ _____ _____ _____
Australia Exposure N- methyl- 2- 25 103 75 309
Standards pyrrolidone(1-
Methyl- 2-
continued...
AUTOSKIN PRO II
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007 CHEMWATCH 6603-49
CC317SCP Version No:1
CD 2007/1 Page 4 of 6
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Source Material TWA TWA STEL STEL Peak Peak TWA
ppm mg/m鲁 ppm mg/m鲁 ppm mg/m鲁 F/CC
_________________ __________________ _____ _____ _____ _____ _____ _____ _____
pyrrolidone)
The following materials had no OELs on our records
鈥? water: CAS:7732-18-5
PERSONAL PROTECTION
RESPIRATOR
Type AK Filter of sufficient capacity
EYE
路 Safety glasses with side shields
路 Chemical goggles.
路 Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document,
describing the wearing of lens or restrictions on use, should be created for each workplace or task. This should include a review
of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid
personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical
exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the first
signs of eye redness or irritation - lens should be removed in a clean environment only after workers have washed hands
thoroughly. [CDC NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
Suitability and durability of glove type is dependent on usage. Factors such as:
路 frequency and duration of contact,
路 chemical resistance of glove material,
路 glove thickness and
路 dexterity,
are important in the selection of gloves.
Wear chemical protective gloves, eg. PVC.
Wear safety footwear or safety gumboots, eg. Rubber.
OTHER
路 Overalls.
路 P.V.C. apron.
路 Barrier cream.
路 Skin cleansing cream.
路 Eye wash unit.
ENGINEERING CONTROLS
General exhaust is adequate under normal operating conditions. If risk of overexposure exists, wear SAA approved respirator.
Correct fit is essential to obtain adequate protection. Provide adequate ventilation in warehouse or closed storage areas.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Clear to slightly milky liquid with a mild characteristicodour; miscible with water.
PHYSICAL PROPERTIES
Liquid.
Mixes with water.
Molecular Weight: Not Available Boiling Range (掳C): 100 approx
Melting Range (掳C): Not Available Specific Gravity (water=1): 1.00- 1.05
Solubility in water (g/L): Miscible pH (as supplied): 7- 8
pH (1% solution): Not Available Vapour Pressure (kPa): Not Available
Volatile Component (%vol): Not Available Evaporation Rate: Not Available
Relative Vapour Density (air=1): Not Available Flash Point (掳C): Not Applicable
Lower Explosive Limit (%): Not Applicable Upper Explosive Limit (%): Not Applicable
Autoignition Temp (掳C): Not Applicable Decomposition Temp (掳C): Not Available
State: Liquid Viscosity: Not Available
continued...
AUTOSKIN PRO II
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007 CHEMWATCH 6603-49
CC317SCP Version No:1
CD 2007/1 Page 5 of 6
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
路 Presence of incompatible materials.
路 Product is considered stable.
路 Hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS CHRONIC HEALTH EFFECTS
TOXICITY AND IRRITATION
Not available. Refer to individual constituents.
Section 12 - ECOLOGICAL INFORMATION
No data
Section 13 - DISPOSAL CONSIDERATIONS
路 Recycle wherever possible.
路 Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable
treatment or disposal facility can be identified.
路 Dispose of by: Burial in a licenced land-fill or incineration in a licenced apparatus (after admixture with suitable
combustible material).
路 Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.
Section 14 - TRANSPORTATION INFORMATION
HAZCHEM: None
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS:UN
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE: None
REGULATIONS
N-methyl-2-pyrrolidone(CAS: 872-50-4) is found on the following regulatorylists;
Australia ExposureStandards
Australia Inventoryof Chemical Substances(AICS)
Australia Standard for the Uniform Schedulingof Drugs and Poisons (SUSDP) - Schedule 5
Australia Standard for the Uniform Schedulingof Drugs and Poisons (SUSDP) - Schedule 6
IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid SubstancesCarried in Bulk
InternationalCouncil of Chemical Associations(ICCA) - High ProductionVolume List
OECD RepresentativeList of High ProductionVolume (HPV) Chemicals
water (CAS: 7732-18-5)is found on the following regulatorylists;
Australia Inventoryof Chemical Substances(AICS)
OECD RepresentativeList of High ProductionVolume (HPV) Chemicals
No data available for N-methyl-2-pyrrolidoneas CAS: 26138-58-9.
continued...
AUTOSKIN PRO II
Chemwatch Material Safety Data Sheet
Issue Date: 19-Mar-2007 CHEMWATCH 6603-49
CC317SCP Version No:1
CD 2007/1 Page 6 of 6
Section 16 - OTHER INFORMATION
INGREDIENTS WITH MULTIPLE CAS NUMBERS
Ingredient Name CAS
N- methyl- 2- pyrrolidone 872- 50- 4, 26138- 58- 9
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, as permitted under the Copyright Act,
no part may be reproduced by any process without written permission from CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 19-Mar-2007
Print Date: 19-Mar-2007
|