Actino-Iron®
DIRECTIONS FOR USE
Biological Fungicide
It is a violation of Federal law to use this product in a manner inconsistent
With Iron And Humic Acid
with its labeling. Do not apply this product in a way that will contact workers
or other persons, either directly or through drift. Only protected handlers
* Biological Soil Additive for Fungus Control
may be in the area during application. For any requirements specific to your
* Controls Soil Borne Plant Diseases such as Pythium,
State or Tribe, consult the agency responsible for pesticide regulation.
Rhizoctonia, Fusarium, Phytophthora and root decay fungi.
* Enhances Root Development and Plant Vitality
Agricultural Use Requirements
* Contains Complexed Iron.
Use this product only in accordance with its labeling and with the
* For Greenhouse, Nursery, Turf Grass and Agricultural Use.
Worker Protection Standard, 40 CFR Part 170. This Standard contains
requirements for the protection of agricultural workers on farms, forests,
ACTIVE INGREDIENTS:
nurseries and greenhouses, and handlers of agricultural pesticides. It
Streptomyces lydicus WYEC108* .............1.3%
contains requirements for training, decontamination, notification, and
emergency assistance. It also contains specific instructions and exceptions
OTHER INGREDIENTS**: .............98.7%
pertaining to the statements on this label about personal protective
equipment (PPE), and restricted entry intervals (REI). The requirements in
*Contains a minimum of 1 X 106 colony forming units per gram.
this box only apply to uses of this product that are covered by the Worker
Protection Standard.
**Other Ingredients include Iron at a minimum of 21.9% and Humic Acid
at a minimum of 47.00%. Iron is derived from magnetite ore. Information
Do not allow worker entry to treated areas during the restricted entry
regarding the contents and levels of metals in this product is available on
interval (REI) of four (4) hours.
the Internet at http://www.wa.gov.agr.
PERSONAL PROTECTIVE EQUIPMENT
KEEP OUT OF REACH OF CHILDREN
CAUTION
PPE requirements for early entry to treated areas (that is permitted under
See back panel for additional precautionary statements.
the Worker Protection Standard and that involves contact with anything
that has been treated, such as plants, soil, or water): coverall, waterproof
First Aid
gloves and shoes plus socks.
Exception: If the product is soil-incorporated, the Worker Protection
If In Eyes: * Hold eye open and rinse slowly and gently with
Standard, under certain circumstances, allows workers to enter treated
water for 15-20 minutes
areas if there will be no contact with anything that has been treated.
* Remove contact lenses, if present, after the first 5
For field applications:
mintes, then continue rinsing eye
Keep unprotected persons out of treated areas until sprays have dried
* Call poison control center or doctor for treatment
or dusts have settled.
advice Applicators and other handlers must wear: a) long sleeved shirt and
Have the product container or label with you when callin a poison control long pants; b) shoes plus socks; c) when dumping or opening bags, or
center or doctor, or going for treatment. You may also contact 1-888-261- other operations where dusts may be created, wear a dust/mist filtering
4731 for emergency medical treatment information respirator (MSHA/NIOSH approval number prefix TC-21C) or a NIOSH
approved respirator with any N-95, R-95, P-95 or HE filter for biological
EPA Reg. No.: (pending as 73314-2) products.
Net Contents: XX Follow manufacturer’s directions for cleaning/maintaining PPE. If no
such instructions for washables, use detergent and hot water. Keep and
EPA Establishment No.: 73314-TX-001
wash PPE separately from other laundry.
Manufactured by:
General Information:
Natural Industries, Inc.
Actino-Iron® Biological Fungicide is a biological soil additive and fungicide
6223 Theall Road
for the control of soil borne plant root rot and damping-off fungi. Actino-
Houston, Texas 77066 Questions? (888) 261-4731
Iron® Biological Fungicide contains agricultural grade iron and humate
(fulvic and humic acids) and is inoculated with the patented Actinovate®
PRECAUTIONARY STATEMENTS
microorganism, Streptomyces lydicus WYEC 108. The Actinovate®
Hazard to humans and domestic animals: Caution. Causes moderate
microorganism colonizes on the root systems of plants, protecting the
eye irritation. Avoid contact with skin, eyes or clothing. Wash thoroughly
plant from soil borne diseases. Fungi controlled include Fusarium,
with soap and water after handling.
Pythium, Rhizoctonia, Phytophthora, Phytomatotricum, Aphanomyces,
Monosprascus, Armillaria, Sclerotinia, Postia, Verticillium, Geotrichum, and
Personal Protective Equipment (PPE): Applicators and other handlers
other root decay fungi. In addition, use of Actino-Iron® will produce hardier,
must wear long-sleeved shirt and long pants, and shoes plus socks. Mixer/
more vigorous plants with increased root development. Plants will be larger
loaders and applicators must wear a dust/mist-filtering respirator meeting
and greener with Actino-Iron® Biological Fungicide.
NIOSH standards of at least N-95, R-95, or P-95. Repeated exposure to
high concentrations of microbial proteins can cause allergic sensitization.
Application Directions:
Follow manufacturer’s instructions for cleaning / maintaining PPE. Keep
and wash PPE separately from other laundry.
Application Uses:
For indoor/outdoor vegetable and ornamental plant use. Actino-Iron®
User Safety Requirements: Wash hands before eating, drinking, chewing
is a biological fungicide for use in soil applications (incorporation and in
gum, using tobacco or using the toilet. Remove PPE immediately after
furrow) in or on all raw agricultural commodities, food and fiber crops,
handling this product. If gloves are worn, wash the outside of gloves before
ornamentals, landscape plants, including tree seedlings for transplanting
removing. As soon as possible, wash thoroughly and change into clean
to the forest.
clothing.
Greenhouses and Nurseries Potting Soil Mix: Evenly mix 5 lbs of Actino-
Environmental Hazards: Do not apply directly to water, or to areas where
Iron® Biological Fungicide per cubic yard of planting media. Re-apply when
surface water is present, or to intertidal areas below the mean highwater
repotting or stepping up.
mark. Do not contaminate water when cleaning equipment or disposing of
equipment washwater.
For Nursery Beds: Incorporate at a rate of 2-8 pounds per 1000 square
feet of bed by raking or tilling. Application of irrigation water will help move
Actino-Iron® Biological Fungicide into the soil. can be used in combination with or in rotation with other fungicides,
insecticides, miticides, fertilizers or micronutrients.
For top dressing: Apply at a rate of 3-oz per cubic foot of planting media in
pot. Water in thoroughly without creating run-off. STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal.
If soil is fumigated or steam sterilized apply Actino-Iron® after treatment. Pesticide Storage: Store in a dry, cool place out of direct sunlight and away
Actino-Iron® Biological Fungicide can be used in combination with or from heat sources. Keep from overheating or freezing. Optimum storage
in rotation with other fungicides, insecticides, miticides, fertilizers or temperature is 40°F to 85°F.
micronutrients. Pesticide Disposal: Wastes resulting from the use of this product may be
disposed of on site or at an approved waste disposal facility.
Turf Grass: Container Disposal: Completely empty package into application
For problem areas, evenly apply 9 lbs of Actino-Iron® Biological Fungicide equipment. Then dispose of empty package in a sanitary landfill or by
per 1,000 square feet of turf grass. For general maintenance, evenly apply incineration, or, if allowed by State and local authorities, by burning. If
4 lbs of Actino-Iron® Biological Fungicide per 1,000 feet of turfgrass. If soil is burned, stay out of smoke.
fumigated or steam sterilized, apply Actino-Iron® Biological Fungicide after
Limited Warranty / Disclaimer
treatment. Actino-Iron® Biological Fungicide can be used in combination
with or in rotation with other fungicides, insecticides, miticides, fertilizers or Manufacturer warrants that this product is suited for the labeled use when
micronutrients. applied according to label directions. Manufacturer makes no warranty
of merchantability. There are no warranties that extend beyond the
For optimal results apply with a drop spreader or by blending it into top description on this label and in no event shall manufacturer be liable for any
dressing. Water in immediately after application. consequential damages.
In-furrow soil application: Lot No.:
Apply Actino-Iron® Biological Fungicide at a rate of 10-15 pounds per acre Best If Used By:
using properly calibrated application equipment. For best results, apply Label Version: 8.2
Actino-Iron® Biological Fungicide using a metering device, mounted to
deliver granules into the furrow just behind the furrow opener. Apply Actino-
Iron® Biological Fungicide either at seeding or to established crops as a
side-dress. Water in after application. Actino-Iron® Biological Fungicide
MATERIAL SAFETY DATA SHEET going for treatment. You may also contact 1-888-21-731 for emergency medical
Actino-Iron® Biological Fungicide treatment information.
I. PRODUCT INFORMATION V. FIRE AND EXPLOSION DATA
General Use: Biological fungicide A. Fire: Not considered a fire hazard.
Chemical Formulation: N/A. B. Explosion: Not considered an explosion
Common Name: Actino-Iron® Biological Fungicide hazard.
Molecular Weight: N/A C. Fire Extinguishing Media: Water, CO2, or dry chemicals
II. PHYSICAL PROPERTIES may be used.
Bulk Density: 5.5 D. Precautions: No precautions are necessary under
Solubility in H2O: none normal conditions of use. As with any dust avoid high concentrations
pH (apparent): 5.5-6.0 VI. PERSONAL PROTECTIVE GEAR
Appearance: dark chocolate brown A. Eyes and Face: Though not necessary, safety glasses may be
Odor: slight odor of rich soil worn.
Boiling Point (degC): N/A B. Respiratory: No respirator is required under normal
Melting Point (degC): N/A conditions of use. If dust is created when when dumping or opening bags use a
Evaporation Rate: N/A dust/ mist filtering respirator
Vapor Pressure: N/A C. Skin: Gloves must be worn.
III. INGREDIENTS D. Shoes: Normal shoes must be worn with socks.
Components % Range VII. STORAGE AND HANDLING
Iron 21.9% Actino-Iron®, Biological Fungicide may be stored in all types of containers made
Humic Acid 47% of various materials of construction. Avoid contact with strong oxidizing agents.
Inert Ingredients (confidential) 29.8% VIII. SHIPPING INFORMATION
Streptomyces Lydicus WYEC 108 1.3% A. DOT Shipping Name: None
IV. HEALTH AND HAZARD INFORMATION B. DOT Hazard Class: None
A. Toxicity: none C. DOT Category: None
B. Carcinogenicity: N/A not listed by NTP, LARC, E. Reportable Qualities (RQ): None
OSHA, ACGIH, ORHIOSH F. HMIS: Personal Protective Code - A (Safety Glasses)
C. Primary Route(s) of Exposure: Skin Contact, Ingestion G. NFPA Rating: 0 (Health) - 0 (Flammability) - 0 (Reactivity)
D: Health Effects of Over Exposure: IX. ENVIRONMENTAL PROTECTION PROCEDURES
1. Inhalation: Nasal Irritation A. Spill Response: No negative environmental impact.
2. Ingestion: Irritation of mucous membranes. No special cleanup requirements
3. Skin: No negative side effects. B. Waste Disposal: No negative environmental impact.
Wash with soap and water. No special preparation required for disposal.
4. Eyes: Slight irritation may occur.
Flush with water. This information presented in this Materials Safety Data Sheet (MSDS) is subject
E. Emergency and First Aid Measures: to revisions and is not all inclusive, but represented as the best information
available to date. This information was drawn from recognized sources, believed
1. Inhalation: Flush nose with water to be reliable. However, Natural Industries, Inc. will not be responsible for
2. Ingestion: Ingestion has shown no mammalian damages of any kind resulting from the use or reliance upon such information.
toxicity The product discussed is sold without warranty, expressed or implied, and upon
3. Skin: Wash with soap and water. conditions that purchasers shall perform their own verification and testing to
4. Eyes: Flush with water for 15-20 minutes. determine its suitability for a particular purpose.
Remove contact lenses, if present, after the first 5 minutes, then continue rinsing Prepared by: Fred Sims
eye. Call a poison control center or doctor for treatment advice. Have the product Effective Date: February 16, 1998
container or label with you when calling poison control center or doctor or Revisions: Matthew Kowalski - Natural Industries Inc. (281) 580-1643
|