MATERIAL SAFETY DATA SHEET Page 1 of 6
Date Prepared: 08/14/02
==============================================================================
SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
==============================================================================
Candlewic Company
825 Easton Rd
Doylestown, PA 18901
Product Name: Clear Pillar Base
Chemical Identity: Trade Secret
Generic Name: Polyamide Blend
Chemical Family: Polyamide Resins
CAS Number: Confidential (See Section 15).
==============================================================================
SECTION 2 COMPOSITION/INFORMATION OF INGREDIENTS
==============================================================================
ACGIH TLV OSHA PEL
Exposure limit for total product Not Established Not Established
TLV = Threshold Limit Value
PEL = Permissible Exposure Limit
==============================================================================
SECTION 3 HAZARDS IDENTIFICATION
==============================================================================
EMERGENCY OVERVIEW:
Clear nearly colorless semi-solid or molten with a mild odor
1. MOLTEN MATERIAL CAN CAUSE THERMAL BURNS.
______________________________________________________________________________
POTENTIAL HEALTH EFFECTS:
EYE: If molten, will cause thermal burns on contact. If solid, no irritation
is expected.
SKIN: If molten, will cause thermal burns on contact. If solid, no hazard is
expected from routine handling.
INHALATION: Molten resin vapor or fumes may cause minor irritation of the
respiratory tract. These vapors or fumes may cause sensitization and the
development of an asthmatic reaction in certain sensitive individuals.
MSDS #: 6738 Page 2 of 6
==============================================================================
SECTION 3 HAZARDS IDENTIFICATION CONT鈥橠
==============================================================================
INGESTION: Not a probable route of entry into the body.
SUBCHRONIC EFFECTS (Target Organ Effects): No known effects.
CHRONIC EFFECTS: No known effects.
==============================================================================
SECTION 4 FIRST AID MEASURES
==============================================================================
EYE CONTACT:
Solid Resin: Emergency care should not be needed.
Molten Resin: Cool the affected area with cold water, but do not attempt to
remove the solidified resin from the skin. Consult a physician immediately
for burn treatment.
SKIN CONTACT:
Solid Resin: As good industrial hygiene practice, at the end of each work
shift, wash skin with plenty of soap and water.
Molten Resin: Cool the affected area with cold water, but do not attempt to
remove the solidified resin from the skin. Consult a physician immediately
for burn treatment.
INHALATION: Remove to fresh air if effects occur from inhalation of molten
resin vapor or fumes.
INGESTION: Emergency care should not be needed.
==============================================================================
SECTION 5 FIRE FIGHTING MEASURES
==============================================================================
Flash point: 342掳F
Upper/lower flammable limits: Unknown
Autoignition temperature: Unknown
Flammability classification: Non-hazardous
Flame propagation rate: Not applicable
Extinguishing media: Water fog, foam, carbon dioxide or dry chemical.
Special precautions: Toxic gases (such as carbon monoxide) may be
released during fire. Use positive-pressure,
self-contained breathing apparatus and full
protective clothing.
Unusual Fire and Explosion
Hazards: No hazards known
==============================================================================
SECTION 6 ACCIDENTAL RELEASE MEASURES
==============================================================================
In a clean area, recover for reuse. Dispose of contaminated material.
MSDS #: 6738 Page 3 of 6
==============================================================================
SECTION 7 HANDLING AND STORAGE
==============================================================================
When handling molten resin, use adequate ventilation to avoid the accumulation
of fumes. Wear appropriate personal protective equipment (see Section 8) to
prevent contact with molten material.
==============================================================================
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
EYES:
Solid Resin: Use safety glasses.
Molten Resin: Chemical safety goggles are recommended. An eye wash is
recommended.
SKIN:
Solid Resin: As good industrial hygiene practice, impervious (for example,
nitrile) gloves are recommended.
Molten Resin: Heat-resistant gloves and other protective clothing should be
worn to prevent body contact. A safety shower is recommended.
INHALATION:
Solid Resin: No respiratory protection is required.
Molten Resin: An air purifying respirator designed for organic vapors should
provide adequate protection.
ENGINEERING CONTROLS: Use adequate ventilation to remove molten resin vapor
or fumes.
==============================================================================
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
Appearance/state: Clear to colorless semi-solid or molten liquid
Odor: Mild
Ph: Not applicable
Vapor Pressure: <0.001 mm Hg at 20掳C (68掳F)
Vapor density: Not applicable
Boiling point: Not applicable
Melting point: 68掳C
Solubility in water: <0.1% at 25掳C (77掳F)
Specific gravity: 0.91 at 25掳C/25掳C (water=1.00)
Evaporation rate: Approx. 0 (n-BuAc=1)
% Volatile by weight: 17.3
MSDS #: 6738 Page 4 of 6
==============================================================================
SECTION 10 STABILITY AND REACTIVITY
==============================================================================
Chemical stability: Stable
Conditions to avoid: This product is not reactive with water.
Chemicals to avoid: None known.
Hazardous Polymerization: Will not occur under normal temperatures and
pressures.
Hazardous Decomposition Products: Thermal decomposition products include toxic
oxides of carbon.
==============================================================================
SECTION 11 TOXICOLOGICAL INFORMATION
==============================================================================
The total product is not on the International Agency for Research on Cancer
(IARC) or National Toxicology Program (NTP) or OSHA lists of carcinogens or
potential carcinogens.
TOXICITY DATA: The following data on test animals indicate that chemically
similar products have low acute toxicity potential.
ROUTE-SPECIES TEST DOSAGE UNITS IRRITATION DATA
Oral-rat LD50 >15 g/kg No data available
OTHER: Molten resin can cause thermal burns.
==============================================================================
SECTION 12 ECOLOGICAL INFORMATION
==============================================================================
No data exists for this product.
==============================================================================
SECTION 13 DISPOSAL CONSIDERATIONS
==============================================================================
Dispose of waste by landfill or incineration in accordance with all local,
state and federal regulations.
Resource Conservation and Recovery Act (RCRA): This product is not included
in the lists of hazardous substances (40 CFR 261.33), nor does it exhibit the
characteristics of hazardous waste (40 CFR 261.20-24).
MSDS #: 6738 Page 5 of 6
==============================================================================
SECTION 14 TRANSPORT INFORMATION
==============================================================================
DOT - Department of Transportation Hazardous Materials Regulations
*
DOT Hazard Class: Class 9
DOT Proper Shipping Name: Elevated Temperature Liquid, n.o.s.
Technical Name: Ester Terminated Polyamide Resin
DOT Identification Number: UN 3257
Surface Freight Classification: Plastic Synthetic
Packing Group: III
* Only when transported in bulk at elevated temperatures, otherwise not
regulated.
==============================================================================
SECTION 15 REGULATORY INFORMATION
==============================================================================
Toxic Substances Control Act (TSCA): The components of this product are on
the TSCA Inventory or the confidential TSCA Inventory under Accession #
147194.
SARA, Title III, Section 313 (40 CFR 372): This product contains the
following substances which are reportable under SARA Toxic Chemical
Release Reporting Regulations:
Chemical Name CAS # Wt%
None
SARA, Section 311/312 Hazard Classifications: This product has the following
hazard categories: None.
New Jersey Community Right to Know Act: This product contains the following
top five ingredients including Hazardous Substances and Trade Secrets:
Chemical Name CAS or NJTS# Wt%
Trade Secret NJTSRN-6738 80
Mineral Oil 8042-47-5 20
Pennsylvania Worker and Community Right To Know Act: This product contains
the following substances which appear on the Hazardous Substance List:
Chemical Name CAS # Wt%
None
Canadian WHMIS System: This product is not controlled under WHMIS.
Canadian Environmental Protection Act (CEPA) Status: The components of this
product are on the DSL.
MSDS #: 6738 Page 6 of 6
==============================================================================
SECTION 16 OTHER INFORMATION
==============================================================================
Hazard Ratings: NFPA 1 Health 1 Fire 0 Reactivity
Revision Note: Revision 5. Revised Section 15.
Prepared by: C. P. Smith
Title: Product Regulatory Specialist
The information contained herein is based on data believed to be reliable, but
is furnished without warranty or guaranty of any kind, and Candlewic Candle
Company disclaims any liability incurred from the use or reliance upon the
same.
END OF MSDS
|