BondPak 2164 Adhesive Material Safety Data Sheet 1 of 11
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
TRADE NAME:
BondPak 2164 Adhesive
This product is a kit which contains both the Part A and Part B
independently packaged in a duel cartridge syringe. An MSDS for each
of these components is included. Please do not separate the component
MSDSs from this cover page.
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user鈥檚 methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro
Corporation product, some of which are uniquely within the user鈥檚
knowledge and control, it is essential that the user evaluate the
BondPro Corporation product to determine whether it is fit for a
particular purpose and suitable for user鈥檚 method of use or
application.
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Page 1 of 5
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
ISSUED:May24,2001
TRADE NAME:
BondPak 2164 Adhesive Part A Translucent Epoxy
BondPak 2164 Adhesive Material Safety Data Sheet 2 of 11
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
SUBSTANCE DESCRIPTION CAS# PERCENT
Aliphatic Polymer Diamine 6891-25-1 100.0
SECTION 3. PHYSICAL DATA
BOILING POINT: N/A
VAPOR DENSITY: N/A
VAPOR PRESSURE: N/A
EVAPORATION RATE: N/A
SOLUBILITY IN WATER: nil
SPECIFIC GRAVITY: 0.970 Water=1
PERCENT VOLATILE: 0.00% by wt
pH: N/D
VISCOSITY: ca. 7000 centipoise
MELTING POINT N/D
APPEARANCE & ODOR:
Paste, amber, pungent odor.
SECTION 4. FIRE AND EXPLOSION HAZARD DATA
Flash Point > 200 F
Flammable Limits 鈥? LEL N/A
Flammable Limits 鈥? UEL N/A
Autoignition Temperature: N/D
EXTINGUISHING MEDIA:
Water, Carbon dioxide, Dry chemical, Foam
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and protective
covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
None known
NFPA HAZARD CLASSIFICATION
HEALTH: 2 FIRE: 0 REACTIVITY: 1 UNUSUAL REACTION HAZARD: NONE
BondPak 2164 Adhesive Material Safety Data Sheet 3 of 11
BondPak 2164 Adhesive Part A Page 2 of 5
SECTION 5. REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY 鈥? MATERIALS/CONDITIONS TO AVOID:
Heat is generated during cure. Do not cure a mass larger than 50 grams
in a confined space to prevent a premature reaction (exotherm) with
production of intense heat and smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Amine
Compounds, Toxic Vapors, Gases or Particulates.
SECTION 6. ENVIRONMENTAL INFORMATION
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding physical
and health hazards, respiratory protection, ventilation, and personal
protective equipment. Cover with absorbent material. Collect spilled
material. Place in a U.S. DOT-approved container.
RECOMMENDED DISPOSAL:
Cure product according to product instructions. Incinerate uncured
waste in an industrial or commercial incinerator. Dispose of
completely cured (or polymerized) material in a sanitary landfill.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: 43 gms/liter tested per EPA method 24A.
VOC Less H2O & Exempt Solvents: 32 gms/liter tested per EPA method 24A.
Since regulations vary, consult applicable regulations or authorities
before disposal. U.S. EPA Hazardous Waste Number = None (Not U.S.
EPA Hazardous).
OTHER ENVIROMENTAL INFORMATION:
No information was found that adequately describes the environmental
properties of this substance.
EPCRA HAZARD CLASS:
FIRE HAZARD: No PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC:
Yes
BondPak 2164 Adhesive Material Safety Data Sheet 4 of 11
BondPak 2164 Adhesive Part A Page 3 of 5
SECTION 7. SUGGESTED FIRST AID
EYE CONTACT:
Immediately flush eyes with large amounts of water for at least 15
minutes. Get immediate medical attention.
SKIN CONTACT:
Immediately wash skin with soap and large amounts of water. Remove
contaminated clothing. If signs/symptoms occur, call a physician.
Wash contaminated clothing before reuse and dispose of contaminated
shoes.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If signs/symptoms
continue, call a physician.
IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.
SECTION 8. PRECAUTIONARY INFORMATION
EYE PROTECTION:
Avoid eye contact. Wear vented goggles. Where safety glasses with
side shields.
SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material(s) are
recommended: polyethylene/ethylene vinyl alcohol.
RECOMMENDED VENTILATION:
Provide appropriate local exhaust for grinding, cutting, or sanding
cured material. Curing ovens must be exhausted to outdoors or to a
suitable emission control device. Use in a well-ventilated area. If
exhaust ventilation is not adequate, use appropriate respiratory
protection.
RESPIRATORY PROTECTION:
Avoid breathing of vapors. Avoid breathing of dust created by cutting,
sanding or grinding. Select one of the following NIOSH approved
respirators based on airborne concentration of contaminants and in
accordance with OSHA regulations: half-mask dust respirator.
PREVENTION OF ACCIDENTAL INGESTION:
Do not eat, drink or smoke when using this product. Wash exposed areas
thoroughly with soap and water. Do not ingest.
RECOMMENDED STORAGE:
Store away from heat. Keep out of the reach of children.
BondPak 2164 Adhesive Material Safety Data Sheet 5 of 11
BondPak 2164 Adhesive Part A Page 4 of 5
FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed.
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
Aliphatic Polymer Diamine NONE NONE NONE NONE
*SKIN NOTATION:
Listed substances indicated with 鈥榊鈥? under SKIN refer to the potential
contribution to the overall exposure by the cutaneous route including
mucous membrane and eye, either by airborne or, more particularly, by
direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
-NONE: None Established
SECTION 9. HEALTH HAZARD DATA
EYE CONTACT:
Chemical Related Eye Burns (chemical corrosivity) : signs/symptoms can
include cloudy appearance of the cornea, chemical burns, pain, tearing,
ulcers, impaired vision or loss of vision.
Vapors from heated material may cause eye irritation.
Dust created by cutting, grinding, sanding, or machining may cause eye
irritation.
SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Mild Skin Irritation: signs/symptoms can include redness, swelling, and
itching.
INHALATION:
Irritation (upper respiratory): signs/symptoms can include soreness of
the nose and throat, coughing and sneezing.
Vapors of heated product may cause irritation of the respiratory
system.
Dust from cutting, grinding, sanding or machining may cause irritation
of the respiratory system.
IF SWALLOWED:
Ingestion may cause:
Irritation of Gastrointestinal Tissues: signs/symptoms can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
BondPak 2164 Adhesive Material Safety Data Sheet 6 of 11
BondPak 2164 Adhesive Part A Page 5 of 5
OTHER HEALTH HAZARD INFORMATION:
Exposure to this material in normal storage and handling has not been
reported to cause significant adverse health effects. However, under
normal processing conditions, e.g. grinding or heating, this product
may release fumes and vapors of variable composition based on specific
process conditions. These process releases may product irritation or
any of the health effects listed above when the emissions are present
at elevated concentrations. Use with appropriate local exhaust
ventilation.
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user鈥檚 methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro Corporation product, some of which are
uniquely within the user鈥檚 knowledge and control, it is essential that
the user evaluate the BondPro Corporation product to determine whether
it is fit for a particular purpose and suitable for user鈥檚 method of
use or application.
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
BondPak 2164 Adhesive Material Safety Data Sheet 7 of 11
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Page 1 of 5
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
Issued:May24, 2001
TRADE NAME:
BondPak 2164 Adhesive Part B Translucent Epoxy
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
SUBSTANCE DESCRIPTION PERCENT CAS#
Epoxy Resin 100.0 25068-38-6
SECTION 3. PHYSICAL DATA
BOILING POINT: N/A
VAPOR DENSITY: N/A
VAPOR PRESSURE: N/A
EVAPORATION RATE: N/A
SOLUBILITY IN WATER: nil
SPECIFIC GRAVITY: 1.170 Water=1
PERCENT VOLATILE: 0.0% by wt
pH: N/A
VISCOSITY: ca. 14000 centipoise
MELTING POINT N/D
APPEARANCE & ODOR:
Liquid, transparent, epoxy odor.
SECTION 4. FIRE AND EXPLOSION HAZARD DATA
Flash Point N/A
Flammable Limits 鈥? LEL N/A
Flammable Limits 鈥? UEL N/A
Autoignition Temperature: N/D
EXTINGUISHING MEDIA:
Water, Carbon dioxide, Dry chemical, Foam
BondPak 2164 Adhesive Material Safety Data Sheet 8 of 11
BondPak 2164 Adhesive Part B Page 2 of 5
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and protective
covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
None known
NFPA HAZARD CLASSIFICATION
HEALTH: 1 FIRE: 0 REACTIVITY: 1 UNUSUAL REACTION HAZARD:
NONE
SECTION 5. REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY 鈥? MATERIALS/CONDITIONS TO AVOID:
Strong Acids, Strong Oxidizing Agents. Heat is generated during cure.
Do not cure a mass larger than 50 grams in a confined space to prevent
a premature reaction (exotherm) with production of intense heat and
smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Aldehydes, Ketones, Hydrocarbons,
Toxic Vapors, Gases or Particulates.
SECTION 6. ENVIRONMENTAL INFORMATION
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding physical
and health hazards, respiratory protection, ventilation, and personal
protective equipment. Cover with absorbent material. Collect spilled
material. Place in a U.S. DOT-approved container.
RECOMMENDED DISPOSAL:
Cure product according to product instructions. Incinerate uncured
waste in an industrial or commercial incinerator. Dispose of
completely cured (or polymerized) material in a sanitary landfill.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: 0 gm/liter.
VOC Less H2O & Exempt Solvents: 0 gm/liter.
Since regulations vary, consult applicable regulations or authorities
before disposal. U.S. EPA Hazardous Waste Number = None (Not U.S.
EPA Hazardous).
BondPak 2164 Adhesive Material Safety Data Sheet 9 of 11
BondPak 2164 Adhesive Part B Page 3 of 5
OTHER ENVIROMENTAL INFORMATION:
No information was found that adequately describes the environmental
properties of this substance.
EPCRA HAZARD CLASS:
FIRE HAZARD: No PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC:
Yes
SECTION 7. SUGGESTED FIRST AID
EYE CONTACT:
Immediately flush eyes with large amounts of water. Get immediate
medical attention.
SKIN CONTACT:
Immediately wash skin with soap and large amounts of water. Remove
contaminated clothing. If signs/symptoms occur, call a physician.
Wash contaminated clothing before reuse and dispose of contaminated
shoes.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If signs/symptoms
continue, call a physician.
IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.
SECTION 8. PRECAUTIONARY INFORMATION
EYE PROTECTION:
Avoid eye contact. Wear goggles. Where safety glasses with side
shields.
SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material (s) are
recommended: polyethylene/ethylene vinyl alcohol.
RECOMMENDED VENTILATION:
Provide appropriate local exhaust for grinding, cutting, or sanding
cured material. Curing ovens must be exhausted to outdoors or to a
suitable emission control device. Use in a well-ventilated area. If
exhaust ventilation is not adequate, use appropriate respiratory
protection.
RESPIRATORY PROTECTION:
Avoid breathing of vapors. Avoid breathing of dust created by cutting,
sanding or grinding. Select one of the following NIOSH approved
respirators based on airborne concentration of contaminants and in
accordance with OSHA regulations: half-mask dust respirator.
BondPak 2164 Adhesive Material Safety Data Sheet 10 of 11
BondPak 2164 Adhesive Part B Page 4 of 5
PREVENTION OF ACCIDENTAL INGESTION:
Do not eat, drink or smoke when using this product. Wash exposed areas
thoroughly with soap and water. Do not ingest.
RECOMMENDED STORAGE:
Store away from heat. Keep out of the reach of children.
FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed.
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
Epoxy Resin NONE NONE NONE NONE
*SKIN NOTATION:
Listed substances indicated with 鈥榊鈥? under SKIN refer to the potential
contribution to the overall exposure by the cutaneous route including
mucous membrane and eye, either by airborne or, more particularly, by
direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
-NONE: None Established
SECTION 9. HEALTH HAZARD DATA
EYE CONTACT:
Moderate Eye Irritation : signs/symptoms can include redness, swelling,
pain, tearing, and hazy vision.
Vapors from heated material may cause eye irritation.
Dust created by cutting, grinding, sanding, or machining may cause eye
irritation.
SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Mild Skin Irritation: signs/symptoms can include redness, swelling, and
itching.
INHALATION:
Irritation (upper respiratory): signs/symptoms can include soreness of
the nose and throat, coughing and sneezing.
Vapors of heated material may cause irritation of the respiratory
system.
BondPak 2164 Adhesive Material Safety Data Sheet 11 of 11
BondPak 2164 Adhesive Part B Page 5 of 5
Dust from cutting, grinding, sanding or machining may cause irritation
of the respiratory system.
IF SWALLOWED:
Ingestion may cause:
Irritation of Gastrointestinal Tissues: signs/symptoms can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
OTHER HEALTH HAZARD INFORMATION:
Exposure to this material in normal storage and handling has not been
reported to cause significant adverse health effects. However, under
normal processing conditions, e.g. grinding or heating, this product
may release fumes and vapors of variable composition based on specific
process conditions. These process releases may product irritation or
any of the health effects listed above when the emissions are present
at elevated concentrations. Use with appropriate local exhaust
ventilation.
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user鈥檚 methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro Corporation product, some of which are
uniquely within the user鈥檚 knowledge and control, it is essential that
the user evaluate the BondPro Corporation product to determine whether
it is fit for a particular purpose and suitable for user鈥檚 method of
use or application.
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
|