BioFX is now part of SurModics
MATERIAL SAFETY DATA SHEET
SECTION 1 - Product and Company Information
Product Name: ABTS One Component HRP Microwell Substrate
Product Number: ABTS
Company: BioFX Laboratories, Inc.
Address: 10715 Red Run Blvd
Suite 114
Owings Mills, MD 21117
Phone: 800.445.6447
Fax: 410.902.0551
SECTION 2 鈥? Chemical Identification
CAS No.: Not applicable
Chemical Formula: Not applicable to mixtures
Trade secret formulation
SECTION 3 鈥? Hazards Identification
This product is a mild oxidizing agent. The toxicological properties of this product have not been
thoroughly investigated.
SECTION 4 鈥? Physical Characteristics
Form: Solution
Color: Clear to light green
Boiling Point: No data available
Vapor pressure (mm Hg): No data available
Vapor density: No data available
Evaporation rate: No data available
SECTION 5 鈥? Storage, Handling and Stability
ABTS One Component HRP Microwell Substrate should be stored at 2掳C - 8掳C. This product is stable
and hazardous polymerization will not occur. Avoid contact with strong oxidizing agents and metals. Not
known to produce hazardous substances upon decomposition. Keep lid closed tightly. Protect from
direct UV light and avoid elevated temperatures.
BioFX Laboratories, Inc. 10715 Red Run Boulevard, Suite 114 Owings Mills, MD 21117 U.S.A.
Phone: 410.902.0281 800.445.6447 Fax: 410.902.0551 Web: www.biofx.com
E-mail: customerservice@biofx.com
ABTS 05/17/07 by HAM
Page 1 of 2
BioFX Laboratories, Inc.
SECTION 6 鈥? Safety Control Measures
Rubber or vinyl gloves, safety glasses/goggles, cotton filter mask, laboratory apron and local exhaust are
recommended. Safe laboratory practices should be followed.
SECTION 7 鈥? Health Hazard Data
May enter the body through ingestion and skin contact. Avoid contact with skin and ingestion. Health
hazards and signs and symptoms of exposure are not known at this time.
SECTION 8 鈥? First Aid Measures
Remove contaminated clothing and shoes, and wash before reuse.
Skin: Wash skin thoroughly with copious amounts of soap and water.
Eyes: Flush with copious amounts of water or eyewash saline for at
least 15 minutes.
Ingestion: Wash out mouth with water if person is conscious and seek
medical attention.
Inhalation: Remove to fresh air. If not breathing, administer CPR. If
breathing is difficult, give oxygen. If discomfort persists, seek
medical attention.
SECTION 9 鈥? Fire/Explosion Hazard Data
Water spray, carbon dioxide, dry chemical powder or appropriate foam can all be used. It is not
necessary to use any special firefighting procedures.
SECTION 10 鈥? Accidental Release Measures
Cover released or spilled material with absorbent. Dispose of with copious amounts of water in
accordance with all national, state, and local regulations.
SECTION 11 鈥? Additional Information
The above information is believed to be correct and may not be all conclusive; however, it should only be
used as a guide. BioFX Laboratories, Inc. shall not be held liable for any damage resulting from handling
or contact with this above product.
These products are for research and manufacturing use only and are not intended for use in humans, therapeutic or diagnostic
purposes. Sales are without any seller鈥檚 warranty or representation, expressed or implied, by usage or otherwise; no claims
beyond replacement of unacceptable material or refund of purchase price shall be allowed. All claims must be made within 30
days following date of delivery. A restocking fee may apply.
BioFX Laboratories, Inc. 10715 Red Run Boulevard, Suite 114 Owings Mills, MD 21117 U.S.A.
Phone: 410.902.0281 800.445.6447 Fax: 410.902.0551 Web: www.biofx.com
E-mail: customerservice@biofx.com
ABTS 05/17/07 by HAM
Page 2 of 2
|