MATERIAL SAFETY DATA SHEET ACC. TO 91/155/EEC
Section 1.------------------Identification--------------------------------------------------------------
Product: human Caspase-8 ELISA
Catalog-No.: BMS2024, BMS2024-UL, BMS2024-PL, BMS2024TEN
Manufacturer: Bender MedSystems GmbH
Campus Vienna Biocenter 2
A-1030 Vienna, Austria
Phone: +43-1-796 40 40 100
Fax: +43-1-796 40 40 400
customerserv@bendermedsystems.com
Section 2.------------------Composition/Information on Ingredients-----------------------
-
Component Ingredient Concentration Identification
Coated Microwell Strips -- -- --
Standard Proclin300 <0.01% EC No. 203-821-4
Detection Antibody Proclin300 <0.01% EC No. 203-821-4
Anti-Rabbit-IgG-HRP -- -- --
Sample Diluent Proclin300 <0.01% EC No. 203-821-4
Wash Buffer 20X Proclin300 <0.01% EC No. 203-821-4
Assay Buffer 20X Proclin300 <0.01% EC No. 203-821-4
Substrate Solution I N.N-Dimethylformamide 26% CAS-No 68-12-2
Substrate Solution II H2O2 0.02% CAS-No 7722-84-1
Stop Solution Ortho-Phosphoric Acid 9% CAS-No. 7664-38-2
Blue Dye Proclin300 <0.01% EC No. 203-821-4
Green Dye Proclin300 <0.01% EC No. 203-821-4
Red Dye Proclin300 <0.01% EC No. 203-821-4
Lysis Buffer Triton X-100 10 % CAS-No. 9002-93-1
Tergitol NP-40 5% CAS-No. 127087-87-0
EGTA 10 mM CAS-No. 67-42-5
PMSF 2mM CAS-No. 329-98-6
Section 3.------------------Hazards Identification------------------------------------------------------------------------
N/A
Section 4.------------------First Aid Measures-----------------------------------------------------------------------------
Eyes and Skin: Flush with large amounts of water for at least 15 minutes. Wash contaminated clothes before
reuse. Consult a physician if irritation persists.
Ingestion: Flush mouth with water. Get medical attention
Inhalation: Remove from exposure to fresh air immediately. Get medical attention.
Section 5.------------------Fire Fighting Measures-----------------------------------------------------------------------
Extinguishing Media: Foam, CO2, Water
Unusual Fire and Explosion Hazards: In case of fire ortho-Phosphoric Acid may decompose into toxic fumes.
Section 6.------------------Accidental Release Measures-------------------------------------------------------------
Cotain spill and then clean up with copious amount of water. Avoid contact with skin and clothing. Dispose acc. to
section 13.
Section 7.------------------Exposure Control/Personal Protective Measures-----------------------------------
Do not pipette by mouth.
Do not eat, drink or smoke in areas where kit reagents or samples are handled.
Avoid contact of skin or mucous membranes with kit reagents or specimens.
Rubber or disposable latex gloves and protective clothing should be worn while handling kit reagents or specimens.
Avoid splashing or generation of aerosols.
Section 8.------------------Handling and Storage------------------------------------------------------------------------
Store product and all components at 2-8掳C
Section 9.------------------Physical and Chemical Properties-------------------------------------------------------
N/A
Section 10.-----------------Stability and Reactivity----------------------------------------------------------------------
H2O2 easily oxidizes materials. Avoid contact between H2O2 and oxidizing materials. Extreme temperature may initiate
spontaneous combustion.
Ortho-Phosphoric Acid can react with metals and strong bases. Thermal decomposition may result in toxic fumes of
phosphoroxide and/or phosphine.
MSDS-2024 Effective date: 01/12/05 Page 1 of 2
MATERIAL SAFETY DATA SHEET ACC. TO 91/155/EEC
Section 11.-----------------Toxicological Information------------------------------------------------------------------
Acute effects: May cause skin and eye irritation.
May be harmful if absorbed through the skin.
May cause irritations to mucous membranes and upper respiratory tract.
May be harmful if swallowed.
Chronic effects: Have not been thoroughly investigated.
Section 12.-----------------Ecological information----------------------------------------------------------------------
Generally not hazardous for water. Do not dispose via sewage system.
Section 13.-----------------Disposal guidelines---------------------------------------------------------------------------
Dispose all excess reagents and samples in biohazardous waste. Alternatively excess reagents and samples, as well
as empty reagent containers can be autoclaved for at least one hour prior to discarding.
Observe all federal, state and local environmental regulations.
Section 14.-----------------Transport information-----------------------------------------------------------------------
Product and all components should be transported at 2-8掳C.
Section 15.-----------------Regulatory information and considerations-----------------------------------------
Labelling: The product is not subject to identification regulations under EU Directives.
Safety phrases: 60 鈥? The product and ist containers must be disposed as hazardous waste
Waterhazard class: Generally not hazardous for water
Section 16.-----------------Other-----------------------------------------------------------------------------------------------
The above information is believed to be correct to the best of our current knowledge. Bender MedSystems GmbH
does not guarantee this to be all-inclusive and shall not be held liable for any damages resulting from handling of or
contact with the above product. All materials and mixtures may present unknown hazards and should be used with
caution. See purchase order, packing slip, package insert, and invoice for additional terms and conditions of sale.
MSDS-2024 Effective date: 01/12/05 Page 2 of 2
|