Page 1/5
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/22/2008 Reviewed on 01/22/2008
1 Identification of substance:
路 Product name: Fibronectin Coated Cell Culture Inserts
路 Catalog number: 354440, 354445, 354492, 354543, 354585, 354599
路 Manufacturer/Supplier:
BD Biosciences - Discovery Labware
2 Oak Park
Bedford, MA 01730
Tel: 877.232.8995
路 Information department: Technical Services
路 Emergency information:
In case of a chemical emergency, spill, fire, exposure, or accident contact BD Discovery Labware at
800.334.5229, or ChemTrec at 800.424.9300.
2 Composition/Data on components:
路 Chemical characterization:
路 CAS No. Description:
Human Fibronectin
路 Chemical characterization
路 Description: Human Fibronectin
3 Hazards identification
路 Hazard description:
This product contains no hazardous constituents, or the concentration of all chemical constituents are below the
regulatory threshold limits described by Occupational Safety Health Administration Hazard Communication
Standard 29 CFR 1910.1200 and the European Directive 91/155/EEC, and 93/112/EC.
路 NFPA ratings (scale 0-4)
Health = 0
0 Fire = 0
0 0 Reactivity = 0
4 First aid measures
路 After inhalation Seek medical treatment in case of complaints.
路 After skin contact Immediately wash with water and soap and rinse thoroughly.
路 After eye contact Rinse opened eye for 15 minutes under running water. Then consult a doctor.
路 After swallowing If symptoms persist consult doctor.
路 Information for doctor Show the product label or this MSDS.
USA
(Contd. on page 2)
DR
Page 2/5
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/22/2008 Reviewed on 01/22/2008
Product name: Fibronectin Coated Cell Culture Inserts
(Contd. of page 1)
5 Fire fighting measures
路 Suitable extinguishing agents
CO2, ABC multipurpose dry chemical or water spray. Fight larger fires with water spray or alcohol resistant
foam.
6 Accidental release measures
路 Measures for environmental protection: Wipe up with damp sponge or mop.
路 Measures for cleaning/collecting:
Absorb spills using disposable towels or absorbant material. Wear gloves during spill cleanup. Disinfect area
with bleach (hypochlorite solution) for at least 15 minutes, or an approved discinfectant for labeled contact time,
then wipe clean. Contain absorbant waste in biohazardous bag.
路 Additional information:
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
路 Handling
路 Information for safe handling: No special measures required.
路 Storage
路 Requirements to be met by storerooms and receptacles: 2-8潞 C
路 Information about storage in one common storage facility: Store away from oxidizing agents.
路 Further information about storage conditions: Store in cool, dry conditions in well sealed containers.
8 Exposure controls and personal protection
路 Additional information about design of technical systems: No further data; see item 7.
路 Components with limit values that require monitoring at the workplace: Not required.
路 Additional information: The lists that were valid during the creation were used as basis.
路 Personal Protective Equipment
路 General protective and hygienic measures Use a Biological Safety Cabinet.
路 Breathing equipment: Not required.
路 Protection of hands:
Chemical resistant gloves (i.e. nitrile, or equivalent).
路 Eye protection: Safety glasses
路 Body protection: Protective work clothing (lab coat).
USA
(Contd. on page 3)
DR
Page 3/5
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/22/2008 Reviewed on 01/22/2008
Product name: Fibronectin Coated Cell Culture Inserts
(Contd. of page 2)
9 Physical and chemical properties:
路 General Information
coating
Form:
Clear
Color:
Characteristic
Odor:
Undetermined
路 Change in condition
路 Melting point/Melting range: Not determined
路 Boiling point/Boiling range: Not determined
Not applicable
路 Flash point:
路 Flammability (solid, gaseous) Product is not flammable.
Product does not present an explosion hazard.
路 Danger of explosion:
Not applicable
路 Vapor pressure:
Not determined
路 Density:
路 Solubility in / Miscibility with
Insoluble
Water:
Not applicable
路 pH-value:
0.0 %
路 Organic solvents:
100.0 %
路 Solids content:
10 Stability and reactivity
路 Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
路 Materials to be avoided: Incompatible material: strong oxidizers.
路 Dangerous reactions No dangerous reactions known
路 Dangerous products of decomposition: No dangerous decomposition products known.
11 Toxicological information
路 Acute toxicity:
路 Primary irritant effect:
路 on the skin: No irritating effect.
路 on the eye: No irritating effect.
路 Sensitization: No sensitizing effects known.
路 Additional toxicological information:
The product is not subject to OSHA classification according to internally approved calculation methods for
preparations.
When used and handled according to specifications, the product does not have any harmful effects according to
our experience and the information provided to us.
The substance is not subject to classification.
USA
(Contd. on page 4)
DR
Page 4/5
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/22/2008 Reviewed on 01/22/2008
Product name: Fibronectin Coated Cell Culture Inserts
(Contd. of page 3)
12 Ecological information:
路 Ecotoxical effects:
路 Other information:
The ecological effects have not been thoroughly investigated, but currently none have been identified.
路 General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water.
13 Disposal considerations
路 Product:
路 Recommendation
After the product is used, disinfect with bleach (sodium hypochlorite),
or an approved discinfectant, or incinerate, or autoclave at 121 C for at least 15 minutes before disposing.
Smaller quantities can be disposed of with solid waste.
This product is not considered a RCRA hazardous waste.
Dispose of material in accordance with federal (40 CFR 261), state and local requirements.
路 Uncleaned packagings:
路 Recommendation: Disposal must be made according to state and federal regulations.
路 Recommended cleansing agent: Water, if necessary with cleansing agents.
14 Transport information
路 DOT regulations:
-
路 Hazard class:
路 Land transport ADR/RID (cross-border)
路 ADR/RID class: -
路 Maritime transport IMDG:
路 Marine pollutant: No
15 Regulations
路 SARA Section 355 (extremely hazardous substances)
Substance is not listed.
路 SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
路 TSCA (Toxic Substances Control Act)
Substance is not listed.
路 California Proposition 65 - Chemicals known to cause cancer
Substance is not listed.
路 Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
路 Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
(Contd. on page 5)
USA
DR
Page 5/5
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/22/2008 Reviewed on 01/22/2008
Product name: Fibronectin Coated Cell Culture Inserts
(Contd. of page 4)
路 Chemicals known to cause developmental toxicity:
Substance is not listed.
路 Carcinogenicity categories
路 IARC (International Agency for Research on Cancer)
Substance is not listed.
路 NTP (National Toxicology Program)
Substance is not listed.
路 TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
路 Product related hazard information:
Observe the general safety regulations when handling chemicals
The substance is not subject to classification according to the sources of literature known to us.
The product is not subject to identification regulations pertaining to regulations on hazardous materials.
路 National regulations
路 Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
16 Other information:
To the best of our knowledge, the information contained herein is accurate. However, neither Becton,Dickinson
and Company or any of its subsidiaries assumes any liabilities whatsoever for the accuracy or completeness of
the information contained herein. Final determination of suitability of any material is the sole responsibility of
the user. All materials may present unknown hazards and should be used with caution. Although certain hazards
are described herein, we cannot guarantee that these are the only hazards that exist.
路 Department issuing MSDS: Safety and Environment Department
路 Contact: Technical Service Representative
USA
DR
|