MATERIAL SAFETY DATA SHEET N.A. = Not Applicable
Not Est. = Not Established
(SIMILAR TO OSHA FORM 174) Prop. = Proprietary
SECTION 1 - MANUFACTURER / DISTRIBUTOR INFORMATION
Product Name: MOLD AWAY Mold and Mildew Remover Product #: 2513
Supplier鈥檚 Name: National Chemical Laboratories of PA, Inc.
Supplier鈥檚 Address: 401 N. 10th Street 路 Philadelphia PA 19123 Emergency Phone #: CHEM-TEL (800) 255-3924
HMIS Hazard Code: Health: 2 Flammability: 0 Reactivity: 1 Other: B Chemical Name: N.A. Proprietary Blend
Chemical Family: Blended Cleaner Formula: N.A. Blended Product
D.O.T. Shipping Name: ORM-D Hazard Class: N/A D.O.T. ID#: N/A
SECTION 2 - HAZARDOUS INGREDIENTS
CHEMICAL NAME CAS NUMBER % Concentration Range Hazard Ratings (TLV/PEL)
Lithium Hypochlorite 13840-33-0 PROP. N/A
SECTION 3 - PHYSICAL DATA
Boiling Point (掳F): 100 Speci铿乧 Gravity: 1.000
Vapor Pressure: N/A Evaporation Rate (Butyl Acetate = 1): N/A
Vapor Density: N/A Melting Point: N/A
Solubility in Water: 100%
Appearance: Light green
Odor: Mystic
SECTION 4 - FIRE AND EXPLOSION DATA
Flash Point (掳F): None
Flammable Limits: N/A
Special Fire Fighting Procedures: Water, foam or dry chemical.
Unusual Fire & Explosion Hazards: Avoid contact with combustible organic substances.
SECTION 5 - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation: Yes Skin: Yes Ingestion: Ye Threshold Limit Value: Not Est.
Emergency & First Aid Procedures: If ingested: Drink mucilage, raw egg whites, milk or rice gruel. Follow with tablespoon of mustard in a glass of
warm water. If irritation persists seek medical attention. Never give anything by mouth to an unconscious person. For Skin or Eyes: Flush with plenty
of water. If irritation persists seek medical attention for eyes get immediate medical attention. Wash contaminated clothing prior to reuse. Inhalation: If
bothersome move to fresh air.
Health Hazards (acute or chronic):: None determined.
Carcinogenicity: NTP? IARC Monographs ? OSHA Regulated? NA
Signs and Symptoms of Exposure: May produce chemical burns on skin and eyes.
Medical Conditions Generally Aggravated by Exposure: None determined
SECTION 6 - REACTIVITY DATA
Stability: Stable
Conditions to Avoid: N/A
Incompatibility: Acids, ammonia. Fire may result from contact with acids, organic or combustible matter.
Hazardous Polymerization: Will not occur
SECTION 7 - SPILL OR LEAK PROCEDURES
Steps to be taken if material is released or spilled: Small spills should be 铿倁shed with large quantities of water. Large spills should be collected for
disposal.
Waste disposal method: Incinerate or 铿倁sh to disposal system in accordance with all local regulations.
SECTION 8 - SPECIAL PROTECTION INFORMATION
Respiratory Protection: None required
Ventilation: Local exhaust recommended. Special: None needed. Mechanical (general) adequate.
Protective Gloves: Rubber or plastic gloves
Eye Protection: Goggles or safety glasses with side shields.
Other Protective Equipment: Not required.
Work / Hygienic Practices: Normal good housekeeping and manufacturing procedures.
SECTION 9 鈥? SPECIAL PRECAUTIONS
Precautions to be taken in handling and storage: Avoid contact with skin, eyes and clothing.
Other Precautions: None known. Wash contaminated clothing prior to reuse. Keep out of reach of children. For professional use only.
The information contained in this MSDS was obtained from current and reliable sources, however the data is provided without any warranty, expressed or implied, regarding
its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of this company, it is not responsible for loss, injury
and expense arising out of the product鈥檚 improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any
statement in this MSDS. Various government agencies may have speci铿乧 regulations regarding the transportation, handling, storage, use or disposal of this product which
may be covered by this MSDS. The user is responsible for full compliance.
Date Prepared 鈥? 10/05/00 By: G.C.
|