MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET
Page 1 Page 2
Date prepared: 02/10/2001
MSDS Number: ACC00523_00120 Health Hazard Data
Product and Company Identification Routes of Entry: Inhalation X Ingestion X Skin Absorption X
Carcinogenicity: NTP___ IARC Monograph___ OSHA___ Not Listed X
Product Name: ECI buffer Health Hazards:
Catalog Number: ACC 00523 (5x concentrate) Acute: Harmful if swallowed. May be harmful by inhalation or skin absorption. Can
ACC 00120 (powder) cause eye and skin irritation.
Chronic: PVP 40 is a possible carcinogen. Sodium azide is a mutatgen.
Company: Agdia, Inc
Address: 30380 County Rd 6 Signs and Symptoms of Exposure: NA
Elkhart, IN 46514 Medical Conditions Generally Aggravated by Exposure: No data
USA
Phone: 1-800-622-4342 or First Aid Procedures
1-574-264-2014
Eye Contact: Flush eyes with water for at least 15 minutes.
Material / Ingredient Identification Skin Contact: Flush skin with water. Remove contaminated clothing and wash before reuse.
Inhalation: Get to fresh air. Get medical attention.
Ingestion: If person is conscious, wash mouth out with water. Get medical attention.
Chemical Name: CAS Number Exposure Limits
PVP 40 9003-39-8 NA
Seek medical assistance for further treatment, observation and support if necessary.
3
Sodium azide 26628-22-8 0.3 mg/m OSHA
20X PBST Refer to MSDS for PBST NA
Control and Protective Measures
Respiratory Protection: If respirator is needed, follow OSHA respirator protection standards
Physical Chemical Characteristics
found in 29CFR1910.134.
Protective Gloves: Chemical resistant gloves.
Boiling Point: NA Specific Gravity: Sodium azide 1.850 Eye Protection: Chemical safety goggles.
Vapor Pressure: NA Melting Point: NA Ventilation: Use adequate general or local exhaust ventilation.
Vapor Density: NA Evaporation Rate: NA Other Protective Clothing and Equipment: Wear lab coat or apron.
Solubility in Water: NA Water Reactive: N0 Hygienic Work Practices: Use good laboratory practices. Wash hands after using.
Appearance and odor: Yellow liquid.
Precautions for Safe Handling and Use
Fire and Explosion Hazard Data
Steps to be Taken If Material Is Spilled Or Released: Wear gloves, chemical safety goggles and
protective clothing. Dike and cover spill with absorbent. Ventilate area and clean spill site.
Flash Point: N/A
Flammability Limits: NA
Waste Disposal Methods: Mix or dissolve with a combustible solvent and burn in a chemical
Extinguisher Media: Dry chemical, foam or carbon dioxide.
incinerator equipped with an afterburner and scrubber. Comply with all applicable federal, state,
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective
and local regulations.
clothing.
Unusual Fire and Explosion Hazards: Emits toxic fumes under fire conditions.
Precautions for Handling and Storage: Do not get in eyes, on skin, or on clothing. Store in a
cool, dry place.
Reactivity Hazard Data
Other Precautions and/or Special Hazards: NA
Chemical Stability: Stable X Unstable____
Conditions To Avoid: N/A
Incompatibility (Materials to avoid): Strong oxidizing agents, acids
Hazardous Decomposition Products: NA
Hazardous Polymerization: May Occur____ Will Not Occur X_
Conditions to Avoid: NA
The above information is believed to be correct but is not all inclusive and should be used only as a guide.