3. HAZARDS IDENTIFICATION
ROUTE OF ENTRY/EXPOSURE
SKIN CONTACT: [x] EYE CONTACT: [x] INHALATION: [x] INGESTION: [x] SKIN ABSORPTION [x]
Effects of acute exposure:
SKIN CONTACT: May cause irritation.
EYE CONTACT: May cause irritation.
INGESTION: May be harmful if ingested.
INHALATION: May cause irritation to mucous membranes and upper respiratory tract.
Effects of chronic exposure: No data available.
SENSITIZATION TO PRODUCT: Not Available
SYNERGISTIC PRODUCTS: Not Available
LD50: MOPSO: Not Available
4. FIRST AID MEASURES
SKIN: In case of contact, immediately flush area with plenty of water.
EYES: Immediately flush eyes with plenty of water for at least 15 minutes and get medical attention.
ORAL: If ingested drink plenty of fluids and contact a physician.
INHALATION: If inhaled move victim to fresh air. If not breathing give artificial respiration. If breathing is difficult give oxygen, and
call physician.
5. FIRE-FIGHTING MEASURES
Flammable: NO
Extinguishing media: As appropriate for fire in surrounding materials.
Flash point: Not Applicable
Upper flammable limit: Not Applicable
Lower flammable limit: Not Applicable
Autoignition temperature: Not Applicable
Hazardous combustion products: No data
Explosion data
Sensitivity to mechanical impact: Not Applicable
Sensitivity to static discharge: Not Applicable
Unusual fire and explosion hazards: No Data
6. ACCIDENTAL RELEASE MEASURES
Local exhaust: Not Required
Protective clothing: Lab Coat
Protective gloves: Rubber/Latex
Eye protection: Safety glasses
Other precautions: Avoid contact and inhalation, do not get in eyes, on skin or clothing. Do not pipet by mouth. Wash
contaminated clothing before reuse.
Respiratory protection: None normally required.
Leak and spill procedure: Absorb small leaks or spills with sponge, mop up large spills with plenty of soap and water.
Phone: 734-487-8300 ? Toll Free: 800-445-9853 ? Fax: 734-483-1592 ?www.pointescientific.com
MATERIAL SAFETY DATA SHEET
7. HANDLING AND STORAGE
Handling: Normal precautions for handling chemicals must be observed.
Storage: Store between +2癈 and +8癈
Shipping regulations: Not regulated
8. EXPOSURE CONTROLS / PERSONNEL PROTECTION
See 6.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: Reagent is provided in a dry powder form.
Appearance and odor: Reagent is a slightly yellow fine powder.
Odor threshold: Not Available
Vapor pressure: Not Available
Vapor density: Not Available
Specific gravity: Not Available
Evaporation rate: Not Available
Melting point: Not Available
Boiling point: Not Available
Solubility in water: Soluble
pH: Reagent = 7.20
Coefficient of oil/water distribution: Not Available
10. STABILITY AND REACTIVITY
Stable: Yes
Hazardous polymerization: Will not occur.
Incompatibility with other substances: Not Available
Hazardous decomposition products: Not Available
11. TOXICOLOGICAL INFORMATION
See 3.
12. ECOLOGICAL INFORMATION
Water Hazard Class: Data not yet available.
13. DISPOSAL CONSIDERATIONS
Waste disposal: Dilute with large volumes of water and dispose of into sewer system, in accordance with local regulations.
14. TRANSPORT INFORMATION
Shipping information: Not regulated
15. REGULATORY INFORMATION
Not applicable.
16. OTHER INFORMATION
The information herein is believed to be correct as of the date hereof but is provided without warranty of any kind. The recipient of our
products is responsible for observing any laws and guidelines applicable.