MATERIAL SAFETY DATA SHEET
Section 1 - Product Identification and Use
Product Name: Human HO-1 ELISA Kit Product#: EKS-800
This product is sold only for research use by qualified laboratory personnel, and is not to be used as a drug, medical device, food additive, cosmetic,
nor household chemical. It is not to be used in diagnostic, therapeutic, consumer, agricultural, nor pesticidal applications.
Manufacturer's Name: Assay Designs
Street Address: 5777 Hines Drive
City, Prov. Postal Code: Ann Arbor, MI 48108 USA
Fax: (734) 668-2793
EMERGENCY PHONE: (734) 668-6113 Toll Free in North America: 1-800-833-8651
Section 2 - Hazardous Ingredients
Hazardous Ingredients:
Kit components may contain the following components:
CAS Registry Numbers Chemical Name Percentage
26628-22-8 Sodium Azide 0.1
26172-55-4 5-chloro-2-methyl-isothiazolin-3-one <<1.15
2682-20-4 2-methyl-4isothiazolin-3-one <<0.35
10031-43-4 Copper (II) nitrate <<0.35
7786-30-3 Magnesium Chloride <<1.0
1.077-60-3 Magnesium Nitrate <<1.7
9016-45-9 Nonylphenylpolyethylene glycol <12.5
54827-17-7 3,3,5,5-tetramethylbenzidine (TMB) N/A
7647-01-0 Hydrogen chloride <8.5
Section 3 - Physical Data
The physical properties of the kit components have not been investigated thoroughly.
TMB: Clear liquid
Stop Solution: Clear, colorless to slight yellow, liquid
Section 4 - Fire and Explosion Hazard
Components of the kit are non-flammable. Fire and explosion data have not been investigated.
Hazardous Combustion Products:
Kit components may emit toxic vapors
TMB: carbon monoxide, carbon dioxide, nitrogen oxide fumes
Stop Solution: Carbon dioxide, carbon monoxide, hydrogen gas fumes
Section 5 - Reactivity Data
Kit components are stable. Avoid contact with reducing agents, amines, strong acids, strong bases, and strong oxidizing agents.
TMB: Stable. Protect from direct UV light, avoid elevated temperatures, protect from moisture. Incompatible with strong oxidizing
agents, metals.
Stop Solution: Stable. Avoid elevated temperatures. Incompatible with oxidizing agents, reducing agents, and bases.
MATERIAL SAFETY DATA SHEET
Section 6 - Toxicological Properties
The toxicological properties of the kit components have not been investigated. Kit components may burn eyes severely, be harmful if
absorbed through skin, burn skin severely, irritate respiratory tract, be harmful if inhaled, be harmful if swallowed. May cause an
allergic reaction in some individuals.
TMB: Irritant to eyes and skin. May cause irritation of the digestive tract and respiratory tract.
Stop Solution: Corrosive to skin and eyes. Inhalation of vapors may cause irritation of nasal and respiratory tract. Ingestion causes
gastrointestinal tract discomfort, nausea and vomiting. IARC: Group 3 Carcinogen
Section 7 ?Spill and Disposal
Wear chemical safety glasses or goggles and compatible chemical-resistant gloves. Avoid inhalation, contact with eyes, skin or
clothing.
*****MULTIPLE COMPONENT SPILL OR LEAK PROCEDURES*****
Wear protective equipment (respirator, chemical safety goggles, rubber boots, and heavy rubber gloves).
Ventilate area.
Absorb on sand or vermiculite and place in closed containers for disposal.
Dispose or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and
scrubber.
Containers of this material may be hazardous when emptied. Emptied containers retain product residues: handle as if they were
full.
Observe all federal, state and local environmental regulations.
Section 8 - First Aid Measures
If any of the kit components are ingested, immediately rinse mouth with water and seek medical attention.
In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. If a
rash or other irritation develops, seek medical attention.
If inhaled, remove to fresh air. If breathing becomes difficult, seek medical attention.
In case of eye contact, flush with copious amounts of water for at least 15 minutes while separating the eyelids with fingers. Seek
medical attention.
Section 9 - Preparation
Prepared by: Phone#: Created: Modified:
Assay Designs (734) 668-6113 06/03/05 03/30/06
Toll free in North America:
1-800-833-8651
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. Stressgen shall not be held liable for any
damage resulting from handling or from contact with the above product. See the Technical Specification, Packing Slip, Invoice, and Product Catalogue for
additional terms and conditions of sale.
|