MATERIAL SAFETY DATA SHEET
1. PRODUCT and COMPANY IDENTIFICATION
Product Name: INFINITITM Wash Buffer Manufacturer/Supplier
AutoGenomics, Inc.
Unit Size: 6 Bottles per Pack; 40ml per Bottle 2251 Rutherford Road
Carlsbad, CA 92008
Each Bottle of Wash Buffer contains
Sodium Citrate Telephone No: (760) 804-7378
Sodium Chloride Toll Free: 1-866-782-8639
Sodium Azide www.autogenomics.com
This MSDS applies to the following
Product Name Catalog Number Packaged
INFINITI?SSC Buffer 12-001 6 Bottles
INFINITI?SSC Buffer 1 QUAD 12-002 6 Bottles
INFINITI?SSC Buffer 2 QUAD 12-003 6 Bottles
2. INFORMATION ON INGREDIENTS
Ingredient CAS Number % Wt
Sodium Citrate 6132-04-3 0.441 %
Sodium Chloride 20510-55-8 0.876 %
Sodium Azide 26628-22-8 <0.1%
3. PHYSICAL and CHEMICAL PROPERTIES
Physical State Clear, colorless liquid
Odor None
pH ND
Boiling Point/Range ND
Melting Point/Range ND
Flash Point ND
Flammability Non-flammable
Vapor Pressure ND
Water Solubility soluble
Partition Coefficient ND
Viscosity ND
Vapor Density ND
Evaporation Rate ND
PS-31007 Rev. C (CO 1343) MSDS INFINITI Wash Buffer Page 1 of 4
MATERIAL SAFETY DATA SHEET
4. HANDLING AND STORAGE
Handling:
Observe good laboratory handling practices. Wash hands thoroughly after removal of
protective gloves.
Avoid contact with eyes and skin. Avoid breathing vapors and do not ingest.
Use only with adequate ventilation.
Label container and keep container tightly closed.
Storage:
Store at room temperature (15 to 30癈) in a cool, dry, well-ventilated area away from
incompatible substances.
Keep container tightly closed.
5. STABILITY and REACTIVITY
Stability:
Stable in normal conditions
Materials and Conditions to Avoid:
Metals
Oxidizing agents
Strong Bases
Avoid excessive heat
Hazardous Decomposition Products:
Hydrogen chloride
Chlorine
Nitrogen oxides
Carbon monoxide
Carbon dioxide
Hazardous decomposition or byproducts will not occur in normal conditions
Hazardous Polymerization:
Will not occur
6. HEALTH HAZARD INFORMATION
Emergency Overview:
Irritant to eyes, skin and respiratory system
Should not be taken internally, inhaled or allow contact with skin
Acute Health Effects:
Skin contact: May cause irritation to skin
o Symptoms include - itching, scaling, reddening or blistering. May cause skin
allergies
Eyes: May cause irritation, redness, watering and itching
Inhalation: Irritating to lungs; not to be inhaled
Ingestion: Hazardous in case of ingestion
Medical Conditions Aggravated by Overexposure
Chronic Health Effects
Carcinogenic Effects: None of the ingredients are known to cause cancer in animals or
humans
Repeated or prolonged exposure is not known to aggravate medical conditions
PS-31007 Rev. C (CO 1343) MSDS INFINITI Wash Buffer Page 2 of 4
MATERIAL SAFETY DATA SHEET
7. FIRST AID MEASURES
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes; seek medical
attention; remove any contact lenses
Skin:
Immediately flush skin with plenty of water for at least 15 minutes; remove any
contaminated clothing and shoes and wash before reusing; cover the irritated skin with an
emollient
If irritation develops, get medical attention
Inhalation:
Move to fresh air. If not breathing, administer artificial respiration; if breathing is
difficult, give oxygen; immediately get medical attention
Ingestion:
Do NOT induce vomiting unless directed to do so by medical personnel
Never give fluids or induce vomiting if a person is unconscious or convulsing
If large quantities of this material are swallowed, call 911 or a physician immediately
o Loosen tight clothing such as a collar or tie, belt or waistband
8. FIRE and EXPLOSTION INFORMATION
Auto-Ignition Temperature N/A
Flammability of the Product Non-Flammable
Flash Points N/A
Flammable Limits N/A
Products of Combustion Metallic Oxides
Explosion Hazards Risks of explosion in presence of static discharge and /or
metals
Risks of explosion in presence of None
mechanical impact
Fire Fighting Media and Instructions N/A
Protective Clothing for Fire Fighting N/A
9. ACCIDENTAL RELEASE MEASURES
Cleanup and Disposal:
Wear appropriate protective equipment
Absorb with an inert, dry material and place in a waste disposal container in full
compliance with national regulations
10. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation
Eyes Protection:
Wear appropriate safety goggles or glasses with side shields.
Skin Protection:
Wear gloves and protective clothing to minimize skin contact.
PS-31007 Rev. C (CO 1343) MSDS INFINITI Wash Buffer Page 3 of 4
MATERIAL SAFETY DATA SHEET
11. TOXICOLOGY INFORMATION
Category Determination
LD50 ND
Carcinogenicity and Mutagenicity ND
Epidemiology, Reproductive Effects, Neurotoxicity ND
Other Studies ND
Exposure Controls:
Ingredient Volume (origin)
Sodium Citrate N/A
Sodium Chloride- Oral (LD50) 3000 mg/kg (rat)
Sodium Azide - Oral (LD50) 27 mg/kg (rat)
Dermal (LD50) 20 mg/kg (rabbit)
12. ECOLOGICAL INFORMATION
Ecological Information:
Unavailable for this product
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Prior to disposal, review federal, state and local government requirements
14. TRANSPORT INFORMATION
TDG Class:
Not regulated
15. REGULATORY INFORMATION
WHMIS Classification:
D2B - Material causing other toxic effects
Domestic Substances List:
All ingredients are listed on the Domestic Substances List
16. OTHER INFORMATION
This material is not intended for food, household, agricultural or cosmetic use. The
information in this MSDS is correct to the best of our knowledge. Users should make
independent decisions regarding completeness of the information based on all sources
available. AutoGenomics shall not be held liable for reliance on the information provided in
this MSDS and/or any damage resulting from the handling or contact with the above named
products.
Key Legend Information:
N/A ?Not Applicable ND ?Not Determined
PS-31007 Rev. C (CO 1343) MSDS INFINITI Wash Buffer Page 4 of 4
|