Material Safety Data Sheet
NFPA Personal protective equipment Transport Symbol
Not regulated.
Preparation Date No data available Revision Date 22-May-2006 Revision Number 2
1. PRODUCT AND COMPANY IDENTIFICATION
Product name SureLINKTM Modified AP
85-01-01, 85-01-02
Product code
SANH Modified Alkaline Phosphatase
Chemical Name
No information available.
Common Name
No information available.
Recommended use
Contact manufacturer Supplier
KPL KPL
910 Clopper Road 910 Clopper Road
Gaithersburg, Maryland 20878 Gaithersburg, Maryland 20878
USA USA
301-948-7755 ?800-638-3167 301-948-7755 ?800-638-3167
FAX 301-948-0169 FAX 301-948-0169
www.kpl.com www.kpl.com
Emergency telephone number 301-948-7755; 800-638-3167
2. HAZARDS IDENTIFICATION
Emergency Overview
Irritant. Toxic.
Solid Odor amine-like.
Physical state
Potential health effects
No information available
Principle Routes of Exposure
Acute effects
Moderately irritating to the eyes.
Eyes
Irritating to skin. Harmful in contact with skin.
Skin
May cause irritation of respiratory tract
Inhalation
Toxic if swallowed.
Ingestion
Prolonged skin contact may cause skin irritation and/or dermatitis.
Chronic effects
See Section 11 for additional Toxicological information.
_____________________________________________________________________________________________
Page 1 / 7
Revision Date 22-May-2006
85-01-01, 85-01-02 - SureLINKTM Modified AP
_____________________________________________________________________________________________
Redness. Symptoms of overexposure are dizziness, headache, tiredness, nausea,
Main symptoms
unconsciousness, cessation of breathing.
Aggravated Medical Conditions No information available
No information available
Interactions with other
chemicals
Potential environmental effects Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
CHEMICAL NAME CAS No. WEIGHT %
Sodium azide 26628-22-8 1-5
Sodium chloride 7647-14-5 60 - 100
Tris(hydroxymethyl)aminomethane 77-86-1 5 - 10
4. FIRST AID MEASURES
Show this safety data sheet to the doctor in attendance.
General advice
In the case of contact with eyes, rinse immediately with plenty of water and seek
Eye contact
medical advice.
Wash off immediately with soap and plenty of water removing all contaminated
Skin contact
clothes and shoes.
Move to fresh air. Artificial respiration and/or oxygen may be necessary.
Inhalation
Immediate medical attention is required.
Drink plenty of water. Do not induce vomiting without medical advice. Consult a
Ingestion
physician if necessary.
Treat symptomatically.
Notes to physician
5. FIRE-FIGHTING MEASURES
Not applicable.
Flammable properties
Use extinguishing measures that are appropriate to local circumstances and the
Suitable extinguishing media
surrounding environment.
Unsuitable extinguishing media No information available
Specific hazards arising from the chemical
In the event of fire and/or explosion do not breathe fumes.
Protective equipment and precautions for firefighters
Wear self-contained breathing apparatus and protective suit.
_____________________________________________________________________________________________
Page 2 / 7
Revision Date 22-May-2006
85-01-01, 85-01-02 - SureLINKTM Modified AP
_____________________________________________________________________________________________
Health 2 Flammability 0 Instability 0
NFPA
6. ACCIDENTAL RELEASE MEASURES
Avoid contact with skin, eyes and clothing.
Personal precautions
Prevent product from entering drains. Prevent further leakage or spillage if safe to
Environmental precautions
do so.
Avoid dust formation. Do not breathe dust. Wet with water.
Methods for containment
Avoid dust formation. Take up mechanically and collect in suitable container for
Methods for clean-up
disposal. Clean contaminated surface thoroughly.
Not applicable
Other information
7. HANDLING AND STORAGE
Avoid contact with skin, eyes and clothing. Ensure adequate ventilation.
Handling
Keep containers tightly closed in a cool, well-ventilated place.
Storage
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure guidelines
Chemical Name ACGIH TLV OSHA PEL
Sodium azide Ceiling: 0.11 ppm 0.1 ppm (vacated)
Ceiling: 0.29 mg/m?br>
Tris(hydroxymethyl)aminomethane None None
Ensure adequate ventilation, especially in confined areas
Engineering controls
Personal protective equipment
Safety glasses with side-shields.
Eye/face protection
Long sleeved clothing. Protective gloves.
Skin protection
In case of insufficient ventilation wear suitable respiratory equipment. Respirator
Respiratory protection
must be worn if exposed to dust. Breathing apparatus with filter.
General hygiene considerations
Handle in accordance with good industrial hygiene and safety practice.
_____________________________________________________________________________________________
Page 3 / 7
Revision Date 22-May-2006
85-01-01, 85-01-02 - SureLINKTM Modified AP
_____________________________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
No information available
Appearance
amine-like.
Odor
No information available
Odor threshold
Solid.
Physical state
No data available
pH
No data available
Flash point
No data available
Autoignition temperature
Upper No data available Lower No data available
Flammability Limits in Air
No information available
Explosive properties
No information available
Oxidizing properties
No data available
Evaporation Rate
No data available
Vapor pressure
No data available
Vapor density
No data available
Specific Gravity
No information available.
Solubility
slightly soluble
Water solubility
No data available.
Partition coefficient (n-
octanol/water)
No information available.
Viscosity
10. STABILITY AND REACTIVITY
Stable under normal conditions.
Chemical stability
Temperatures above 60癈.
Conditions to avoid
Incompatible with strong acids and bases.
Incompatible materials
Carbon oxides. Nitrogen oxides (NOx).
Hazardous decomposition products
None under normal processing
Possibility of hazardous reactions
11. TOXICOLOGICAL INFORMATION
Acute toxicity
Toxic if swallowed. Irritant.
Product Information
Component Information
Chemical Name LD50 Oral LD50 Dermal LC50 Inhalation
Sodium azide 27 mg/kg Mouse 20 mg/kg Rabbit
27 mg/kg Rat
42 g/m3 Rat 1 h
Sodium chloride 3 g/kg Rat 10 g/kg Rabbit
4 g/kg Mouse
Tris(hydroxymethyl)aminometha 5900 mg/kg Rat
ne
Chronic toxicity
There are no known carcinogenic chemicals in this product.
Carcinogenicity
_____________________________________________________________________________________________
Page 4 / 7
Revision Date 22-May-2006
85-01-01, 85-01-02 - SureLINKTM Modified AP
_____________________________________________________________________________________________
Legend:
Irritating to skin. Irritating to eyes. May cause irritation of respiratory tract.
Irritation
Not applicable.
Corrosivity
Not applicable.
Sensitization
Not applicable.
Neurological effects
Did not show mutagenic effects in animal experiments.
Mutagenic effects
Not applicable.
Reproductive effects
Not applicable.
Developmental effects
No information available.
Target Organ effects
12. ECOLOGICAL INFORMATION
Ecotoxicity
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
No information available
Persistence/Degradability
Does not bioaccumulate.
Bioaccumulation/ Accumulation
No information available
Mobility in Environmental Media
13. DISPOSAL CONSIDERATIONS
Dispose of in accordance with National, State and Local regulations
Waste Disposal Method
Empty containers should be taken for local recycling, recovery or waste disposal
Contaminated packaging
No data available
US EPA Waste Number
14. TRANSPORT INFORMATION
Not regulated.
DOT
15. REGULATORY INFORMATION
_____________________________________________________________________________________________
Page 5 / 7
Revision Date 22-May-2006
85-01-01, 85-01-02 - SureLINKTM Modified AP
_____________________________________________________________________________________________
International Inventories
Chemical Name TSCA DSL NDSL EINECS ELINCS ENCS CHINA KECL PICCS AICS
Sodium azide X X - X - X X X X X
Sodium chloride X X - X - X X X X X
Tris(hydroxymethyl)aminomethane X X - X - X X X X X
Complies
TSCA
Does not Comply
DSL
Complies
NDSL
Complies
EINECS
Does not Comply
ELINCS
Does not Comply
ENCS
Does not Comply
CHINA
Does not Comply
KECL
Does not Comply
PICCS
Does not Comply
AICS
USA
Federal Regulations
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains
no chemical or chemicals which are subject to the reporting requirements of the Act and and Title 40n of the Code of
Federal Regulations, Part 372.
Sodium azide (CAS #: 26628-22-8)
SARA 311/312 Hazardous Categorization
Yes
Acute Health Hazard
No
Chronic Health Hazard
No
Fire Hazard
No
Sudden Release of Pressure Hazard
No
Reactive Hazard
Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61)
None
State Regulations
California Proposition 65
This product contains the following Proposition 65 chemicals: None
State Right-to-Know
Chemical Name Massachusetts New Jersey Pennsylvania Illinois Rhode Island
Sodium azide X X X X
Legend:
X - Listed
Canada
WHMIS hazard class
D1B Toxic materials
_____________________________________________________________________________________________
Page 6 / 7
Revision Date 22-May-2006
85-01-01, 85-01-02 - SureLINKTM Modified AP
_____________________________________________________________________________________________
16. OTHER INFORMATION
KPL
Prepared By
910 Clopper Road
Gaithersburg, MD
1-800-638-3167
22-May-2006
Revision 2 Date
Product name change.
Revision summary
Product Stewardship
Revision summary
23 British American Blvd.
Latham, NY 12110
1-800-572-6501
23-Jul-2005
Revision 1 Date
Disclaimer
The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its
publication. The information given is designed only as a guide for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered as a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
material or in any process, unless specified in the text.
End of MSDS
_____________________________________________________________________________________________
Page 7 / 7
|