MATERIAL SAFETY DATA SHEET
24 HOUR EMERGENCY ASSISTANCE GENERAL MSDS ASSISTANCE
CHEMTREC: 800-424-9300 Transport MEIGS: 800-362-1440 General
800-441-3637 Medical 608-742-1805 FAX
=====================================================================
Section 1: PRODUCT IDENTIFICATION
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------
Product Name: Asphalt Emulsion, Cationic
Synonyms: CRS-2, CRS-2P, CSS-1, CSS-1H, CQS, CRS-2L
Chemical Name: Asphalt Emulsion
Chemical Family: Petroleum Hydrocarbon, Proprietary Amino compounds
Creation Date: January 3, 2000
Revision Date: May 9, 2007
=====================================================================
Section 2: COMPOSITION/COMPONENTS
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Components CAS# %
Petroleum Asphalt 8052-42-4 60-73
Hydrogen Sulfide 7783-06-4 <1
Polynuclear Aromatic Hydrocarbons (PAHs) N/A trace
Water N/A 30-40
Amino Compounds N/A 0-3
Hydrochloric Acid 7647-01-0 0.05-0.10
Polymer N/A 0-3
Fuel Oil N/A 0-4
Composition varies depending on source of crude and specification of final product.
For Exposure Limits, see Section 8.
Page 1 of 6
=====================================================================
Section 3: HAZARD RATING/SUMMARY
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -----------------------------------
NFPA Ratings (Scale 0-4): Health = 1 Fire = 0 Reactivity = 0
Hazard Rating:
0 ?Least
1 ?Slight
2 璏oderate
3 璈igh
4 璄xtreme
Emergency Overview:
Hydrogen Sulfide (H2S) gas may accumulate in the air space above asphalt during storage or transport.
Hydrogen Sulfide is harmful or fatal if inhaled.
Heated asphalt can cause thermal burns. Eye protection, as well as protective clothing, should be worn
when working with hot asphalt.
Prolonged or repeated contact with asphalt may cause skin irritation or dermatitis. Pre-existing skin, eye,
and respiratory disorders may be aggravated by exposure to components of this product. May cause photo-
irritation (light sensitivity) in some individuals.
There is inadequate evidence that paving asphalts alone are carcinogenic to humans.
=======================================================================
Section 4: FIRST AID MEASURES
-------------------------------------------------------------------------------------------------------------------------------------
Inhalation: Fumes may cause headache, blurred vision, nasal and respiratory irritation, nausea, and
drowsiness. Remove victim to uncontaminated area. Give artificial respiration if not breathing. Get
medical attention.
Skin Contact:
Hot Asphalt Cement: Flush with cool water for at least 15 minutes or completely submerge affected area in
ice water. Do not apply ice directly to affected area. Do not attempt to remove the asphalt cement.
Removing the asphalt may further damage the tissue. Natural separation will occur in 48 ?72 hours. Get
immediate medical attention.
Treatment for shock:
1. Keep victim lying down and quiet.
2. Keep victim covered with a blanket or something similar to keep body temperature at normal, 98篎.
3. Keep victim's head lower than feet to promote blood supply to head and chest.
Cold Asphalt Cement: Clean exposed skin with waterless hand cleaner and then wash with soap and water.
Ingestion: No significant health hazards identified. Dilute by drinking 2-3 glasses of water. If large
amount is swallowed, get medical attention.
Page 2 of 6
======================================================================
Section 5: FIRE FIGHTING MEASURES
-------------------------------------------------------------------------------------------------------------------------------------
Fire and Explosion Hazards: Asphalt Emulsion is not a combustible liquid per the Occupational Safety
and Health Administration (OSHA) hazard communication standard. Hot Asphalt may ignite flammable
materials on contact.
Extinguishing Media: carbon dioxide, regular dry chemical, regular foam, water;
For large fires, use regular foam or flood area with fine water spray.
CAUTION: Contact of hot asphalt with water leads to violent expansion as the water turns to steam.
Evacuate area and fight fire from a safe distance.
Fire Fighting: Avoid inhalation of fumes. Stay upwind and keep out of low areas. Firefighters should
wear full-face mask and full protective equipment including a positive pressure self-contained breathing
apparatus.
Hazardous Combustion Products:
Combustion may produce COx, NOx, SOx, irritating vapors hydrogen cyanide, and hydrogen sulfide.
Flash Point: N/A
=======================================================================
Section 6: ACCIDENTAL RELEASE MEASURES
-------------------------------------------------------------------------------------------------------------------------------------
Keep ignition sources out of the area. Take immediate steps to stop and contain the release. Containment
may be safely accomplished with a soil dike. Keep out of waterways and sewers. For small spills, absorb
the asphalt with sand or other non-combustible material. Collect spilled material in appropriate container
for disposal. Notify local authorities and the National Response Center (800) 424-8802 if required.
=======================================================================
Section 7: HANDLING AND STORAGE
-------------------------------------------------------------------------------------------------------------------------------------
Storage: Store in a well-ventilated area, in an appropriately labeled container. Outside storage is
recommended. Avoid storing with strong oxidizers.
Heating coils in storage or transportation vessels must be covered with at least 8" of asphalt.
CAUTION: Empty containers may contain toxic, flammable/combustible or explosive residue or vapors.
Do not reuse without adequate precautions.
CAUTION: Vapors containing hydrogen sulfide may accumulate in the air space above asphalt in storage
or transportation vessels. Use appropriate respiratory protection to prevent exposure. Do not enter enclosed
or confined space without a self-contained breathing apparatus and other protective equipment.
Handling: Keep away from all ignition sources. Do not smoke in areas where asphalt is being used or
stored. Do not eat or drink in areas where asphalt is being used or stored. Use good personal hygiene
practices when working with asphalt. When opening covers and outlet caps on storage tanks, use faceshield
and gloves to avoid possible injury from pressurized asphalt.
Page 3 of 6
=======================================================================
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
-------------------------------------------------------------------------------------------------------------------------------------
Exposure Limits:
Asphalt (Petroleum) fumes:
0.5 mg/m3 ACGIH 8-hour TWA (inhalable fraction)
5mg/m3 15-minute REL
Hydrogen Sulfide:
20ppm OSHA ceiling
10ppm ACGIH 8-hour TWA
15ppm ACGIH 15-minute STEL
Amino Compounds:
N/A
Respiratory Protection: Protection not required under normal conditions and adequate ventilation. Do not
breathe mist or vapor. A positive pressure self contained breathing apparatus should be used whenever
entering a confined space, for firefighting, or when the worker's face is to be within three feet of an open
hatch.
Skin Protection: Insulated gloves should be worn when handling hot material. Natural fiber long-sleeved
shirts and pants without cuffs should be worn. Synthetic fibers can melt and fuse to the skin when in
contact with hot asphalt. Rubberized suits or coats may be needed for some maintenance operations with
hot asphalt.
Eye Protection: Use goggles and/or face shield when deemed appropriate.
Intermittent or occasional skin contact with cool asphalt emulsion is not expected to have serious health
effects as long as good personal hygiene measures, such as those outlined in this material safety data sheet,
are followed.
=======================================================================
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
-------------------------------------------------------------------------------------------------------------------------------------
Asphalt emulsion is a chocolate-brown liquid. Asphalt emulsion is produced by milling petroleum asphalt
into microscopic particles and then dispersing it in water with a chemical emulsifier.
The following data are approximate or typical values and should not be used for precise design purposes.
Boiling point: > 212篎 Evaporation rate: n/a
Specific gravity: 1.02 Vapor pressure (@ 25篊): 23.7 mm Hg
Density: 8.4 lbs/gal pH: <7
=======================================================================
Section 10: STABILITY AND REACTIVITY
-------------------------------------------------------------------------------------------------------------------------------------
Asphalt emulsion is stable at normal temperatures and pressures.
Avoid all sources of ignition around hot asphalt and asphalt vapors.
Incompatible with oxidizing materials such as chlorates, nitrates, and peroxides.
Asphalt emulsion will not polymerize.
Page 4 of 6
=======================================================================
Section 11: TOXICOLOGICAL INFORMATION
-------------------------------------------------------------------------------------------------------------------------------------
Hydrogen sulfide gas, which may accumulate in the airspace above stored asphalt, is irritating and can be
fatal. The "rotten egg" odor of hydrogen sulfide should not be used as a reliable indicator as to the presence
of the gas. Odor fatigue readily occurs as exposure to the gas increases. Odor sensation is immediately lost
at concentrations greater than 150ppm. At concentrations around 1000ppm, hydrogen sulfide causes rapid
death due to metabolic asphyxiation.
Polynuclear Aromatic Hydrocarbons (PAHs) are naturally occurring constituents of crude oils. Since
asphalt cement is refined from crude oil, PAHs may be present in trace amounts in the asphalt cement.
Repeated or prolonged exposure to some PAHs has been associated with effects to the liver, kidneys,
immune system and skin. Some PAHs have been shown to be carcinogenic after prolonged or repeated skin
contact in laboratory animals. However, the measured concentrations, and the frequency of PAHs occurring
in paving asphalt, have been low.
The National Institute for Occupational Safety and Health (NIOSH) concludes that there is insufficient
evidence for an association between lung cancer and exposure to paving asphalt fumes. No serious health
effects are expected as long as good personal hygiene is practiced and safety measures outlined in this
MSDS are followed.
=======================================================================
Section 12: ECOLOGICAL
-------------------------------------------------------------------------------------------------------------------------------------
Ecological testing information is not available.
=======================================================================
Section 13: DISPOSAL CONSIDERATIONS
-------------------------------------------------------------------------------------------------------------------------------------
It is the responsibility of the user to follow all local, state, and federal regulations applicable to disposal.
=======================================================================
Section 14: TRANSPORTATION INFORMATION
-------------------------------------------------------------------------------------------------------------------------------------
US DOT 49 CFR 172.101
Shipping Name: Asphalt, Emulsion, Liquid
DOT Identification Number: N/A
DOT Classification Number: N/A
Packing Group: N/A
Placards Required: N/A
Page 5 of 6
=======================================================================
Section 15: REGULATORY INFORMATION
-------------------------------------------------------------------------------------------------------------------------------------
SARA Title III Section 302 Extremely Hazardous Substances (40 CFR Part 355):
This product is not regulated under Section 302 of SARA and 40 CFR Part 355.
SARA Section 304 (40 CFR Part 355.40):
This product is not regulated under Section 304 of SARA and 40 CFR Part 355.
U.S. Inventory (TSCA):
This product is a mixture of chemical substances currently listed on the EPA/TSCA Inventory of Chemical
Substances.
Disclaimer: The data, statements, and information contained in this MSDS are believed to be accurate and
reliable. However, Meigs makes no warranty or guarantee, expressed or implied regarding the accuracy of
this data or any results obtained from this data. Meigs does not accept any responsibility for any injury,
loss, or damage from use of this information or from use of the product described within.
Page 6 of 6
|