Vicki Peters Nail Products MSDS#: KIM053102-OMI
ODORLESS MONOMER
Material Safety Data Sheet Page 1 of 5
Section 1 ?Identification of the Substance/Preparation and of the Company/Undertaking
MSDS KIM053102-
Product Name: ODORLESS MONOMER
#: OMI
MSDS Initial Approval 5/31/200 MSDS Prepared BSQ
Chemical Name: N/A
Date: 2 by:vp
Family: Monomers Manufacturer: Vicki Peters Nail Products
2500 E. Imperial Hwy. Ste. 201 #371 Brea, CA 92821
Product Use: Nail liquid Emergency Phone Numbers: ( 800 ) 535 - 5053
Product #: 4910014 Information Contacts: (856)-663-4700
Section 2 - Composition/Information on Ingredients
Chemical Identity CAS EINECS# INCI Name Exposure Limits Carcinogen %
Numbers OSHA ACGIH
TWA/STEL TWA/STEL IARC/NTP/OSHA
2-hydroxyethyl methacrylate 868-77-9 212-782-2 HEMA N/E N/E Not Listed 25-35
2-Ethylhexyl methacrylate 688-84-6 211-708-6 N/DA N/E N/E Not Listed 25-30
Triethylene Glycol 109-16-0 203-652-6 Triethyleneglycol N/E N/E Not Listed 25-30
Dimethacrylate Esters Dimethacrylate
N,N-Dimethyl-p-toluidine 99-97-8 202-805-4 Dimethyltolyamine N/E N/E Not Listed 10-20
10 mg/m3
2-Hydroxy-4-n- 1843-05-6 217-421-2 Benzophenone-12 N/E Not Listed 0-1
octoxybenzophenone
2-(2-Hydroxy-3,5-di- 25973-55-1 247-384-8 N/DA N/E N/E Not Listed 0-1
tertamylphenyl)Benzotriazole
N/E - None Established N/DA - No Data Available
N/R - Not Reviewed N/A - Not Applicable
Hazard Symbols: Xi Risk Phrases: R36/37/38, R43 Safety Phrases: S26, S28A, S45
Section 3 - Hazards Identification
EMERGENCY OVERVIEW
This information may be based on findings from related or similar materials.
May cause allergic skin reaction.
?br>
Material may be slightly combustible.
?br>
May cause eye irritation.
?br>
May cause respiratory tract irritation.
?br>
Potential Health Effects, Signs and Symptoms of Exposure:
Primary Route of Entry Inhalation, skin, eyes
Eye Vapor concentrations may cause irritation of eyes. Liquid contact with eyes can cause irritation and
possible corneal damage.
Skin Liquid concentration may cause moderate skin irritation. Repeated or prolonged contactmay cause
allergic skin rashes, itching and swelling which becomes evident on re-exposure to this product.
Ingestion Causes irritation, a burning sensation of the mouth, throat and respiratory tract and abdominal pain.
Inhalation High vapor concentrations may irritate the respiratory system. Prolonged exposure can lead to
headaches, nausea, drowsiness and unconsciousness.
Sub-Chronic Effects Unlikely to present a cancer hazard in man.
NOTE: Refer to Section 11, Toxicological Information for Details
Section 4 - First Aid Measures
First Aid for Eye Flush with water for 15 minutes, including under eyelids. Seek medical help if discomfort persists.
First Aid for Skin Wash thoroughly with soap and water. Remove contaminated clothing and wash before reuse. Seek
medical attention if discomfort persists.
First Aid for Inhalation Remove to fresh air. If having breathing difficulty, give oxygen. If breathing has stopped, give
artificial respiration. Get medical help if discomfort persists.
First Aid for Ingestion Rinse mouth out with water. Only induce vomiting if directed by a physician. Never give anything by
mouth to an unconscious person. Seek prompt medical attention.
Revised Date: 03/1/2005 | Replaces Date: 02/7/2004
Vicki Peters Nail Products MSDS#: KIM053102-OMI
ODORLESS MONOMER
Material Safety Data Sheet Page 2 of 5
Section 5 - Fire Fighting Measures
Flash Point Flammable Limit Auto-ignition Temperature
(癋/癈) (vol%) (vol%)
TAG Closed: 200癋/93篊 LEL : N/DA; UEL : N/DA N/DA
Method:
Extinguishing Media: Use CO2, dry chemcial for small fires, or alcohol type aqueous film forming foam.
Fire Fighting Instructions: Wear self-contained breathing apparatus and full protective gear. Water may be ineffective unless
used as a fine spray or fog. Use water spray to cool the exposed containers of monomer.
Unusual Hazards: Vapors may travel to source of ignition and flash back. Avoid ignition sources or excessive
temperatures. Heat can induce polymerization with rapid release of energy. Closed containers may
rupture explosively. Spontaneous polymerization may occur with prolonged aging.
Section 6 - Accidental Release Measures
Spill or Release Procedures Eliminate all sources of heat and ignition. Use absorbent material for spills and dike it, wash spill material into
retaining containers. Place containers in a well ventilated area. Consult an expert on disposal of
recovered material and ensure conformity to local disposal regulations. Keep unnecessary and
unprotected personnel from entering. Contain and recover liquid when possible. Use non-sparking tools and
equipment. Collect liquid in an appropriate container or absorb with an inert material (e. g., vermiculite, dry
sand, earth), and place in a chemical waste container. Do not use combustible materials, such as sawdust. Do
not flush to sewer! US Regulations (CERCLA) require reporting spills and releases to soil, water and air in
excess of reportable quantities. The toll free number for the US Coast Guard National Response Center is
(800) 424-8802. EU Regulations require the consultation of Directive 98/24/EC. If a leak or spill has not
ignited, use water spray to disperse the vapors, to protect personnel attempting to stop leak, and to flush spills
away from exposures.
Section 7 - Handling and Storage
Handling Keep away from heat, sparks, flames and other sources of ignition. Avoid contact with eyes, skin
and clothing. Avoid breathing vapor or mist . Use with adequate ventilation. Ground all metal
containers when transferring and use explosion-proof equipment. Follow all MSDS/label
precautions even after the container is emptied because it may retain product residues. Wash
thoroughly after handling.
Storage Store in a cool, dry area. Keep container closed when not in use. Store at ambient temperatures out
of direct sunlight. Store in a well ventilated place. Store in accordance with National Fire
Protection Association recommendations. Maintain air space inside storage containers. Inhibitor
equires air (oxygen) contact to function. Check inhibitor levels after 3 months and return to
original level.
Explosion Hazard Avoid ignition sources or excessive temperatures. Heat can induce polymerization with
rapid release of energy. Closed containers may rupture explosively. Spontaneous polymerization
may occur with prolonged aging.
Section 8 - Exposure Controls / Personal Protective Equipment
Engineering Controls Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne
levels below recommended exposure limits. Use explosion-proof ventilation equipment.
Personal Protective Equipment
General To identify additional Personal Protective Equipment (PPE) requirements, it is recommended that a
hazard assessment in accordance with the OSHA PPE Standard (29CFR1910.132), or European Standard
EN166 be conducted before using this product . Provide eye wash stations and safety showers. Wear
impervious clothing to prevent ANY contact with this product, such as gloves, apron, boots, or
whole body suit. Nitrile rubber is better than PVC.
Eye/ Face Protection Use impermeable clothing to prevent ANY contact with this product, such as gloves, apron, boots, or whole
body suit. Nitrile rubber is better than PVC.
Skin Protection Wear resistant gloves.To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respiratory Protection A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be
permissible under certain limited circumstances where airborne concentrations are expected to exceed
exposure limits. Protection provided by nuisance level organic vapor dust masks can be used, however the use
of the respirator is limited. Follow OSHA respirator regulations found in 29 CFR 1910.134 or European
Revised Date: 03/1/2005 | Replaces Date: 02/7/2004
Vicki Peters Nail Products MSDS#: KIM053102-OMI
ODORLESS MONOMER
Material Safety Data Sheet Page 3 of 5
Standard EN 149.
Section 9 - Physical and Chemical Properties
Appearance Odor & Odor Threshold PH Specific Gravity Viscosity % Volatile
Clear, viscous liquid Very slight, monomer odor N/A (H20=1): <1 mPas @ 20癈 W/W %:
Boiling Point/ Decomposition Octanol/Water Vapor Vapor Evaporation Ignition Solubility
Freezing Point Temperature Partitioning Pressure: Density Rate In Water
Coefficient (20癈)
Log Po/w
N/DA N/A N/DA mm Hg: (Air =1): (Butyl Acetate= N/A g/100g @ 20 ?C
0.69 kPa @ N/DA 1): N/DA
38 C
Flash Point Flammable Limit Auto-ignition Temperature
(癋/癈) (vol%) (vol%)
TAG Closed: 200癋/93篊 LEL : N/DA; UEL : N/DA N/DA
Section 10 - Stability and Reactivity
Stability: Incompatibility (Materials to Avoid):
Stable Reducing and oxidizing agents and UV light.
Hazardous Decomposition Products: Hazardous Polymerization:
Oxides of carbon when burned. May occur
Conditions to Avoid:
Temperatures above 60篎, oxidizing or reducing agents, peroxides and amines, storage in absence of inhibitor, and inadvertent addition of
catalyst.
Section 11 - Toxicological Information
Acute Oral Toxicity Acute Dermal Toxicity Acute Inhalation Toxicity Irritation - skin Irritation - Eye
No information available No information available No information available No information available No information
available
Since this product contains a very low concentration of active components, the primary toxicological information is derived from the
dimethacrylated monomers. Further hazardous properties cannot be excluded. The product should be handled with care when dealing with
chemicals.
Sensitization Mutagenicity Sub-chronic Toxicity
No information available No information available No information available
Section 12 - Ecological Information
Ecotoxicological Information
Acute Toxicity Acute Toxicity Acute Toxicity Bioconcentration Toxicity to Sewage Bacteria
To Fish to Invertebrates to Algae
No information available No information available No information No information No information available
available available
Chemical Fate Information
Biodegradability No information available
Chemical Oxygen Demand No information available
To the best of our knowledge, the ecotoxocological and chemical fate properties have not been thoroughly investigated.
Do not allow to enter drinking water supplies, wastewater, or soil.
Section 13 - Disposable Considerations
Dispose of diking materials and absorbent in compliance with State, Local, and Federal regulations. Residual vapors may explode on
ignition; do not cut, drill, or weld on or near the container. Mix with compatible chemical which is less flammable and
incinerate.
Generator must determine what is and what is not a hazardous waste. Please follow all regulatory guidelines when determining disposal
options. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations
may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local
requirements. For EU Member States, please refer to any relevant Community provisions relating to waste. In their absence, it is useful to
remind the user that national or regional provisions may be in force.
Revised Date: 03/1/2005 | Replaces Date: 02/7/2004
Vicki Peters Nail Products MSDS#: KIM053102-OMI
ODORLESS MONOMER
Material Safety Data Sheet Page 4 of 5
Section 14 - Transport Information
DOT (49 CFR 172)
Proper Shipping Name: Non-Regulated Material
Identification Number: N/A
Marine Pollutant: No
Special Provisions: None
Emergency Response Guidebook (ERG) #: N/A
IATA (DGR):
Proper Shipping Name: Non-Regulated Material
Class or Division: N/A
UN or ID Number: N/A
Packaging Instructions: None
Emergency Response Guidance (ICAO)#: N/A
IMO (IMDG):
Proper Shipping Name: Non-Regulated Material
Class or Division: N/A
UN or ID Number: N/A
Special Provisions & Stowage/Segregation: None
Emergency Schedule (EmS)#: N/A
Other Information: Flash point = 93篊
Section 15 - Regulatory Information
US Federal Regulations
Clean Air Act: HAP/ODS This product contains no hazardous air pollutants (HAP) or ozone depleting substances (ODS) as
defined by the U. S. Clean Air Act.
Clean Water Act: This product contains no chemicals listed under the U. S. Clean Water Act Priority Pollutant List or
Hazardous Substance list.
FDA: Food Packaging Status This product has not been cleared by the FDA for use in food packaging and/or other applications as an
indirect food additive.
Occupational Safety and Health Act This product is considered to be a hazardous chemical under the OSHA Hazard Communication
Standard. Its hazards are:
Immediate (acute) health hazard
?br>
RCRA This product is considered not to be a hazardous waste under RCRA (40 CFR 261 ).
SARA Title III: Section 302 (TPQ) This product contains no chemicals regulated under Sec. 302 as extremely hazardous substances that
carry a TPQ.
SARA Title III: Section 302 (RQ) This product contains no chemicals regulated under Section 302/304 as extremely hazardous
chemicals for emergency release notification ("CERCLA" List).
SARA Title III: Section 311-312: This product is considered hazardous under the OSHA Hazard Communication Standard and is
regulated under Section 311-312 (40 CFR 370). Its hazards are:
Immediate (acute) health
?br>
SARA Title III: Section 313: This product contains the following substances subject to the reporting requirements of Section 313 of
Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: NONE
TSCA Section 8(b): Inventory: This product contains chemicals listed on the TSCA inventory or otherwise complies with TSCA
premanufacture notification requirements.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
State Regulations
CA Right-to-Know Law: This product contains the following chemicals on the California Right-to-Know List: NONE
California No Significant Risk Level: NONE
FL Right-to-Know Law: This product contains the following chemicals on the Florida Substance List: NONE
MA Right-to-Know Law: This product contains the following chemicals on the Massachusetts Substance List: NONE
NJ Right-to-Know Law: This product contains the following non-hazardous components subject to disclosure under New
Jersey Right-To-Know legislation. NONE
PA Right-to-Know Law: This product contains the following non-hazardous components subject to disclosure under
Pennsylvania Right-to-Know legislation: NONE
MN Right-to-Know Law: This product contains the following chemicals on the Minnesota Right-to-Know legislation: NONE
Revised Date: 03/1/2005 | Replaces Date: 02/7/2004
Vicki Peters Nail Products MSDS#: KIM053102-OMI
ODORLESS MONOMER
Material Safety Data Sheet Page 5 of 5
International Regulations
CDSL: Canadian Inventory N,N-dimethyl-p-toluidine DSL regulatory status: Included, WHMIS: n/da
(on Canadian Transitional List) 2-Ethylhexyl methacrylate DSL regulatory status: Included, WHMIS: n/da
Triethylene glycol dimethacrylate DSL regulatory status: Included, WHMIS: n/da
Hydroxyethyl methacrylate DSL regulatory status: Included, WHMIS: D2A
2-Hydroxy-4-n-octoxybenzophenone DSL regulatory status: Included, WHMIS: n/da
2-(2-Hydroxy-3,5-di-tertamylphenyl)Benzotriazole DSL regulatory status: Included,
WHMIS = n/da
EINECS: European Inventory: Odorless Monomer:
?Hazard Symbols: Xi
?Risk Phrases: R36/37/38: irritating to eyes, respiratory system, and skin, R43:
May cause sensitization by skin contact.
?Safety Phrases: S26: in case of contact with eyes, rinse immediately, S28A: after
contact with skin, wash immediately with plenty of water, S45: in case of accident,
or if you feel unwell, seek medical advise immediately (show the label where
possible).
Section 16 - Other Information
Hazard Rating System (Pictograms)
NFPA: HMIS:
1
Flammability
2
2
1 1
Health Reactivity
1
Product Number ?4910014
Revised Sections since Last Version: Update Section 2 INCI names, update format in all sections.
The information presented herein was obtained from sources considered to be reliable. However, this information is provided without
any warranty, expressed or implied, regarding its correctness or suitability for consumers intended use and/or application. For this and
other reasons, we assume no responsibility and expressly disclaim liability for loss, damage or expense arising out of any way
connected with the handling, storage, use or disposal of the product. This MSDS was prepared expressly for this product. Use the
materials only as directed. If the product is used as a component of another product, the information contained within the MSDS may
not be applicable. If one could have any concerns with or problems understanding this MSDS form, please direct all questions to
INFOTRAC, Chemical Emergency Resources System at 1(800) 535-5053.
Revised Date: 03/1/2005 | Replaces Date: 02/7/2004
|