Material Safety Data Sheet according to 91/155/EC - ISO 11014-1
Page 1 of 6
MSDS-No. : 153499
V001.1
Loctite 510
Revision: 02.10.2006
printing date: 03.02.2008
1. Identification of the substance/preparation and of the company/undertaking
Trade name:
Loctite 510
Intended use:
Anaerobic
Company name:
Henkel Limited
Technologies House
Wood Lane End
HP2 4RQ Hemel Hempstead
Phone: +44 (0)1442 278000
Fax-no.: +44 (0)1442 278071
Great Britain
Emergency information:
+353-1-4599301/+353-87-2629625/+353-1-4046444
2. Composition / information on ingredients
General chemical description:
Anaerobic Sealant
Declaration of ingredients according to 91/155/EC:
Hazardous components EINECS content Classification
CAS-No.
1,1'-(methylenedi-p- 237-163-4 5 - 10 % T - Toxic; R23
phenylene)bismaleimide Xi - Irritant; R36/38, R43
13676-54-5 N - Dangerous for the environment; R50/53
Cumene hydroperoxide 201-254-7 1-< 3 % O - Oxidizing; R7
80-15-9 T - Toxic; R23
Xn - Harmful; R21/22, R48/20/22
C - Corrosive; R34
N - Dangerous for the environment; R51, R53
Cumene 202-704-5 0,1 - < 1 % R10
98-82-8 Xn - Harmful; R65
Xi - Irritant; R37
N - Dangerous for the environment; R51, R53
3. Hazards identification
Prolonged contact with skin, particularly damaged skin, may cause sensitization or dermatitis in sensitive individuals.
R36/37 Irritating to eyes and respiratory system.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
MSDS-No.: 153499 Loctite 510 Page 2 of 6
V001.1
4. First-aid measures
Inhalation:
Move to fresh air. If symptoms persist, seek medical advice.
Skin contact:
Rinse with running water and soap.
Seek medical advice.
Eye contact:
Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
Ingestion:
Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting.
Seek medical advice.
5. Fire-fighting measures
Suitable extinguishing media:
carbon dioxide, foam, powder
Special protection equipment for firefighters:
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Hazardous combustion products:
Oxides of carbon, oxides of nitrogen, irritating organic vapors.
6. Accidental release measures
Personal precautions:
Avoid skin and eye contact.
Ensure adequate ventilation.
Environmental precautions:
Do not let product enter drains.
Clean-up methods:
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
7. Handling and storage
Handling:
Use only in well-ventilated areas.
Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation
Storage:
Store in original containers at 8-21癈 (46.4-69.8癋) and do not return residual materials to containers as contamination may
reduce the shelf life of the bulk product.
MSDS-No.: 153499 Loctite 510 Page 3 of 6
V001.1
8. Exposure controls / personal protection
Components with specific control parameters for workplace:
Valid for
Great Britain
Basis
Occupational Exposure Limits
mg/m3
Ingredient ppm Type Category Remarks
cumene 20 100 Time Weighted Average EU-2000/39/EC
98-82-8 (TWA).
50 250 Short Term Exposure EU-2000/39/EC
Limit (STEL):
Skin designation. Can be absorbed through the EU-2000/39/EC
skin.
25 125 Time Weighted Average EH40 WEL
(TWA).
50 250 Short Term Exposure EH40 WEL
Limit (STEL):
Skin designation. Can be absorbed through the EH40 WEL
skin.
Respiratory protection:
Use only in well-ventilated areas.
Hand protection:
The use of chemical resistant gloves such as Nitrile are recommended
Please note that in practice the working life of chemical resistant gloves may be considerably reduced as a result of many
influencing factors (e.g. temperature). Suitable risk assessment should be carried out by the end user. If signs of wear and
tear are noticed then the gloves should be replaced
Eye protection:
Wear protective glasses.
Body protection:
Wear suitable protective clothing.
General protection and hygiene measures:
Good industrial hygiene practices should be observed
9. Physical and chemical properties
Appearance gel
pink
Odor: mild
pH-value not applicable
Boiling point > 150 癈 (> 302 癋)
Flash point > 93,3 癈 (> 199,9 癋)
Vapor pressure < 5 mm/Hg
(27 癈 (80,6 癋))
Density 1,178 g/cm3
()
Solubility (qualitative) Slight
(Solvent: water)
Vapor density: Not available
VOC content < 3 % (As defined in the Council Directive 2004/42/EC)
(2004/42/EC)
MSDS-No.: 153499 Loctite 510 Page 4 of 6
V001.1
10. Stability and reactivity
Conditions to avoid:
Stable
Materials to avoid:
Reaction with strong acids.
Reacts with strong oxidants.
Hazardous decomposition products:
Irritating organic vapours
carbon oxides
Sulphur oxides
nitrogen oxides
11. Toxicological information
Oral toxicity:
This material is considered to have low toxicity if swallowed.
Inhalative toxicity:
Irritating to respiratory system
Skin irritation:
May cause sensitization by skin contact.
Eye irritation:
Irritating to eyes.
12. Ecological information
Ecotoxicity:
Toxic to aquatic organisms
May cause long-term adverse effects in the aquatic environment.
Do not empty into drains / surface water / ground water.
Mobility:
Cured adhesives are immobile.
Persistence and Biodegradability:
The product is not biodegradable.
Bioaccumulative potential:
No data available.
General ecological information:
Cured Loctite products are typical polymers and do not pose any immediate environmental hazards.
Precautions required with respect to Environmental Hazards of articles in which this product is used should be considered.
13. Disposal considerations
Product
Disposal methods:
Dispose of in accordance with local and national regulations.
Contribution of this product to waste is very insignificant in comparison to article in which it is used
Waste code( ):
08 04 09 waste adhesives and sealants containing organic solvents and other dangerous substances
Packaging
Disposal methods:
After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in
an authorised legal land fill site or incinerated.
MSDS-No.: 153499 Loctite 510 Page 5 of 6
V001.1
14. Transport information
Road transport ADR:
Class: 9
Packaging group: III
Classification code: M6
Hazard ident. number: 90
UN no.: 3082
Label: 9
Technical name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Diphenylmethane Bismaleimide)
Railroad transport RID:
Class: 9
Packaging group: III
Classification code: M6
Hazard ident. number: 90
UN no.: 3082
Label: 9
Technical name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Diphenylmethane Bismaleimide)
Inland water transport ADN:
Class: 9
Packaging group: III
Classification code: M6
Hazard ident. number: 90
UN no.: 3082
Label: 9
Technical name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Diphenylmethane Bismaleimide)
Marine transport IMDG:
Class: 9
Packaging group: III
UN no.: 3082
Label: 9
EmS: F-A ,S-F
Seawater pollutant: -
Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Diphenylmethane Bismaleimide)
Air transport IATA:
Class: 9
Packaging group: III
Packaging instructions (passenger) 914
Packaging instructions (cargo) 914
UN no.: 3082
Label: 9
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s. (Diphenylmethane
Bismaleimide)
MSDS-No.: 153499 Loctite 510 Page 6 of 6
V001.1
15. Regulations - classification and identification
Indication of danger:
N - Dangerous for the Xi - Irritant
environment
Contains
1,1'-(methylenedi-p-phenylene)bismaleimide
Risk phrases:
R36/37 Irritating to eyes and respiratory system.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety phrases:
S23 Do not breathe vapour.
S24 Avoid contact with skin.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37 Wear suitable gloves.
S51 Use only in well-ventilated areas.
S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
16. Other information
Full text of the R-phrases indicated by codes in this safety data sheet. The labeling of the product is indicated in Section 15.
R10 Flammable.
R21/22 Harmful in contact with skin and if swallowed.
R23 Toxic by inhalation.
R34 Causes burns.
R36/38 Irritating to eyes and skin.
R37 Irritating to respiratory system.
R43 May cause sensitization by skin contact.
R48/20/22 Harmful: danger of serious damage to health by prolonged exposure through inhalation and if swallowed.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R51 Toxic to aquatic organisms.
R53 May cause long-term adverse effects in the aquatic environment.
R65 Harmful: may cause lung damage if swallowed.
R7 May cause fire.
Further information:
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is
intended to describe our products from the point of view of safety requirements and is not intended to guarantee any
particular properties.
This safety data sheet was prepared in accordance with Council Directive 67/548/EEC and it's subsequent amendments, and
Commission Directive 1999/45/EC.
|