MATERIAL SAFETY DATA SHEET
Powercrete F1 Part A
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS AND OF THE COMPANY UNDERTAKING
POWERCRETE F1 PART A
Product Name
Pipe Coating
Product Description
Berry Plastics Corporation, Tapes and Coatings Division
Manufacturer/Supplier
11010 Wallisville Rd.
Address
Houston, TX 77013
(713) 676-0085 (Monday ?Friday 8:00 am to 5:00 pm)
Phone Number
(800) 424-9300
Chemtrec Number
October 09, 2009
Revision Date:
February 1, 2008
MSDS Date:
Safety Data Sheet according to EC directive 2001/58/EC and OSHA's Hazcom Standard (29 CFR 1910.1200)
2. HAZARDS IDENTIFICATION
EU Main Hazards
R36/38 Irritating to eyes and skin.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms may cause long-term adverse effects in the aquatic
environment.
Routes of Entry
- Eye contact - Skin contact ?Inhalation (if aerosolized)
Carcinogenic Status
Considered carcinogenic by IARC (Titanium Dioxide)
Target Organs
Skin - Eye ?Respiratory System (if aerosolized)
Health Effects - Eyes
Liquid, mist or vapor may cause pain, transient irritation and superficial corneal effects.
Health Effects - Skin
Repeated exposure may cause skin irritation. May cause skin sensitization.
Health Effects - Ingestion
If swallowed, may cause mild irritation to the GI tract.
Health Effects - Inhalation
Prolonged repeated exposure may cause irritation.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Component Name CAS#/Codes Concentration R Phrases Classification
Bisphenol A, epichlorohydrin 28068-38-6 <45% R36/38, R43, Xi; N
polymer 500-033-5 R51/53
Titanium Dioxide 13463-67-7 <2% None None
236-675-5
Inorganic compounds proprietary >50% None None
Revision Date: October 09, 2009 Page 1 of 6
Berry Plastics Corporation Material Safety Data Sheet
Tapes and Coatings Division Powercrete F1 Part A
4. FIRST AID MEASURES
Eyes
Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain
medical attention if soreness or redness persists.
Skin
Immediately flood the skin with large quantities of water for at least 15 minutes, preferably under a
shower. Remove contaminated clothing and continue washing. Contaminated clothing should be washed
or dry-cleaned before re-use. Obtain medical attention if blistering occurs or redness persists.
Ingestion
Do not induce vomiting. Have victim drink 1-3 glasses of water to dilute stomach contents. If there is
difficulty in breathing, give oxygen. Obtain medical attention immediately.
Inhalation
Remove from exposure. If there is difficulty in breathing, give oxygen. Obtain medical attention
immediately.
5. FIRE - FIGHTING MEASURES
Extinguishing Media
Use foam, dry chemical or carbon dioxide.
Unusual Fire and Explosion Hazards
Decomposition and combustion products may be toxic.
Protective Equipment for Fire-Fighting
Wear full protective clothing and self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Contain and absorb using earth, sand or other insert material. Transfer into suitable containers for
recovery or disposal. Wear appropriate protective clothing. Prevent the material from entering drains or
watercourses. Notify authorities if spill has entered watercourse or sewer or has contaminated soil or
vegetation. Dispose in accordance with federal, state and local regulations.
7. HANDLING AND STORAGE
Use in well ventilated area. Use local exhaust ventilation. Use appropriate protective clothing. If this
product is sprayed, aerosolized or applied to hot surfaces, wear appropriate protective clothing to
prevent contact with skin, eyes and respiratory system. Consider the use of respiratory protection,
especially during application to hot surfaces. Avoid contact with eyes, skin and clothing. Keep container
tightly closed when not in use.
Storage area should be: - cool - dry - well ventilated - away from incompatible materials - out of direct
sunlight ?away form sources of ignition
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Standards
Exposure limits are listed below, if they exist.
Titanium Dioxide
3
ACGIH TLV: 10 mg/m TWA
3
OSHA PEL: 15 mg/m TWA (Total dust)
Bisphenol A, epichlorohydrin polymer
None established.
Engineering Control Measures
Engineering methods to prevent or control exposure are preferred. Methods include process or
personnel enclosure, mechanical ventilation (dilution and local exhaust), and control of process
conditions.
Revision Date: October 09, 2009 Page 2 of 6
Berry Plastics Corporation Material Safety Data Sheet
Tapes and Coatings Division Powercrete F1 Part A
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Protection
Wear respiratory protection if there is a risk of exposure to high vapor concentrations, aerosols or if
applied to hot surfaces. The specific respirator selected must be based on the airborne concentration
found in the workplace and must not exceed the working limits of the respirator.
Hand Protection
Butyl gloves are recommended.
Eye Protection
Chemical goggles or safety glasses with side shields
Body Protection
If there is danger of splashing, wear: - overall or apron
9. PHYSICAL AND CHEMICAL PROPERTIES
Viscous Liquid
Physical State
Off white
Color
Slight
Odor
Not applicable
pH
1.92 +/- 0.03
Specific Gravity
o o
>260 C/500 F
Boiling Range/Point (癈/F)
Not determined
Melting Point (癈/F)
o o
Approx. 251 C/484 F (Pensky-Martens)
Flash Point (PMCC) (癈/F)
o o
Approx. 0.03 mbar at 77 C/171 F
Vapor Pressure
Not determined
Evaporation Rate
Negligible
Solubility in Water
Not Applicable
Vapor Density (Air = 1)
Not determined
Viscosity (cSt)
Not determined
VOC (g/l)
10. STABILITY AND REACTIVITY
Stability
Stable under normal conditions.
Conditions to Avoid
- Heat, sparks, flames - contact with incompatibles
Materials to Avoid
Strong oxidizing agents ?strong Lewis or mineral acids ?strong mineral and organic bases ?avoid
contact with water
Hazardous Polymerization
Will not occur.
Hazardous Decomposition Products
oxides of carbon - aldehydes
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
Low order of acute toxicity.
Chronic Toxicity/Carcinogenicity
Titanium Dioxide: IARC Overall Evaluation is 2B (Possibly carcinogenic to humans)
Revision Date: October 09, 2009 Page 3 of 6
Berry Plastics Corporation Material Safety Data Sheet
Tapes and Coatings Division Powercrete F1 Part A
11. TOXICOLOGICAL INFORMATION
Genotoxicity
This product is not expected to cause any mutagenic effects.
Reproductive/Developmental Toxicity
This product is not expected to cause adverse reproductive effects.
12. ECOLOGICAL INFORMATION
Mobility
No relevant studies identified.
Persistence/Degradability
No relevant studies identified.
Bio-accumulation
No relevant studies identified.
Ecotoxicity
No data available.
13. DISPOSAL
For disposal of residual product, mix (by volume) 2 parts Powercrete F1 Part A with 1 part Powercrete
F1 Part B and allow to solidify in well ventilated area. Dispose of in accordance with all applicable local
and national regulations. Labels should not be removed from containers until they have been cleaned.
Empty containers may contain hazardous residues. Dispose of containers with care.
14. TRANSPORT INFORMATION
Not Regulated
DOT CFR 172.101 Data
Not Regulated
UN Proper Shipping Name
None.
UN Class
None.
UN Number
None.
UN Packaging Group
Consult current IATA Regulations prior to shipping by air.
Classification for AIR
Transportation (IATA)
15. REGULATORY INFORMATION
EU Label Information
Classification and labelling have been performed according to EU directives 67/548/EEC and 99/45/EC
including amendments(2001/60/EC and 2006/8/EC)
EU Hazard Symbol and Indication of Danger
Xi, N: Irritant and Dangerous to the Environment
R phrases
R36/38 ?Irritating to eyes and skin
R43 ?May cause sensitization by skin contact
R51/53 ?Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic
environment.
S phrases
S(02) - Keep out of reach of children.
S24 ?Avoid contact with skin.
S28 ?After contact with skin, wash immediately with plenty of water and soap.
S37/39 ?Wear suitable gloves and eye/face protection
S(46) ?(If swallowed, seek medical advice immediately and show this container or label)
S61 ?Avoid release to the environment.
Revision Date: October 09, 2009 Page 4 of 6
Berry Plastics Corporation Material Safety Data Sheet
Tapes and Coatings Division Powercrete F1 Part A
15. REGULATORY INFORMATION
US REGULATIONS (Federal, State) and INTERNATIONAL CHEMICAL REGISTRATION LAWS
TSCA Listing
All ingredients have been verified for inclusion on the EPA Toxic Substance Control Act Chemical
Substance Inventory.
EINECS Listing
All ingredients in this product have been verified for inclusion on the European Inventory of Existing
Commercial Chemical Substances (EINECS) or specifically exempted.
DSL (Canadian) Listing
All ingredients in this product have been verified for inclusion on the Domestic Substance List (DSL).
California Proposition 65
This product contains materials which the State of California has found to cause cancer, birth defects
or other reproductive harm: Crystalline silica (14808-60-7) 0.004% - Phenyl glycidyl ether (122-60-1)<6
ppm
SARA Title III Sect. 311/312 Categorization
Immediate (Acute) Health Hazard, Delayed (Chronic) Health Hazard
SARA Title III Sect. 313
This product does not contain any chemicals that are listed in Section 313 at or above de minimis
concentrations.
16. OTHER INFORMATION
NFPA Ratings
NFPA Code for Flammability - 0
NFPA Code for Health - 1
NFPA Code for Reactivity - 0
NFPA Code for Special Hazards ?None
HMIS Ratings
HMIS Code for Flammability - 0
HMIS Code for Health - 1
HMIS Code for Reactivity - 0
HMIS Code for Personal Protection - See Section 8
Abbreviations
N/A: Denotes no applicable information found or available
CAS#: Chemical Abstracts Service Number
ACGIH: American Conference of Governmental Industrial Hygienists
OSHA: Occupational Safety and Health Administration
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
STEL: Short Term Exposure Limit
NTP: National Toxicology Program
IARC: International Agency for Research on Cancer
R: Risk
S: Safety
msdstechnical@berryplastics.com
For further Information email:
EnviroNet LLC.
Prepared By:
Revision Date: October 09, 2009 Page 5 of 6
Berry Plastics Corporation Material Safety Data Sheet
Tapes and Coatings Division Powercrete F1 Part A
16. OTHER INFORMATION
The information and recommendations presented in this MSDS are based on sources believed to be
accurate. Berry Plastics Corporation, Tapes and Coatings Division assumes no liability for the
accuracy or completeness of this information. It is the user's responsibility to determine the suitability
of the material for their particular purposes. In particular, we make NO WARRANTY OF
MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, with respect to such
information, and we assume no liability resulting from its use. Users should ensure that any use or
disposal of the material is in accordance with applicable Federal, State, and local laws and
regulations.
Revision Date: October 09, 2009 Page 6 of 6
|