MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part A) OB-101 (Part A)
Rev. Date 12/07/07 Rev. Date 12/07/07
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega.com omega.com
e-mail: info@omega.com e-mail: info@omega.com
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
The information contained herein is based upon data considered true and accurate. However,
OMEGA makes no warranties, express or implied, as to the accuracy or adequacy of the
information contained herein or the results to be obtained from the use thereof. This information PRODUCT NAME: OMEGABOND 101 (Part A)
is offered solely for the user's consideration, investigation and verification. Since the use and
CHEMICAL FAMILY: Epoxy Adhesive
conditions of use of this information and the material described herein are not within the control
of OMEGA, OMEGA assumes no responsibility for injury to the user or third persons. The GENERAL DESCRIPTION: Two-part Epoxy Resin; "A" Component (White)
material described herein is sold only pursuant to OMEGA's Terms and Conditions of Sale,
SUPPLIER: OMEGA Engineering, Inc.
including those limiting warranties and remedies contained herein, it is the responsibility of the
ADDRESS: PO Box 4047
user to determine whether any use of this data and information is in accordance with applicable
Stamford, CT 06907
federal, state or local laws and regulations.
TELEPHONE: (203) 359-1660
?Copyright 2008 OMEGA ENGINEERING, INC., ALL RIGHTS RESERVED. PRINTED IN U.S.A.
SECTION 2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
WARNING!
EYE IRRITANT. SKIN IRRITANT. SKIN SENSITIZER. White Paste Slight Odor
EYE CONTACT: Irritiating, but does not injure eye tissue.
SKIN CONTACT: Irritating to the skin. Repeated and/or prolonged contact may cause skin
sensitization.
INHALATION: Unlikely to be hazardous by inhallation because of the low vapor pressure of the
material at ambient temperature. Vapors and/or aeorsols which may be formed at elevated
temperatures may be irritating to eyes and respiratory tract.
INGESTION: Ingestion may cause irritation of the gastrointestinal tract.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
CHEMICAL FAMILY: Formulated Epoxy Resin
COMPONENT CAS NUMBER CONCENTRATION
(% by weight)
Epoxy Resin Proprietary >50
SECTION 4. FIRST AID MEASURES
EYE: Immediately irrigate with eyewash solution or clean water, holding the eyelids apart, for at
least 15 minutes. Obtain immediate medical attention.
SKIN CONTACT: Remove grossly contaminated clothing, including shoes, and launder before reuse.
Discard shoes. Wash skin with soap and water. If symptoms develop, obtain medical attention.
INHALATION: Remove to fresh air. Administer oxygen to aid breathing. Get medical attention.
INGESTION: DO NOT attempt to give anything by mouth to an unconscious person. If individual
is conscious, give water to dilute stomach contents. Get prompt medical attention.
1 of 8
8 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part A) OB-101 (Part A)
Rev. Date 12/07/07 Rev. Date 12/07/07
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega.com omega.com
e-mail: info@omega.com e-mail: info@omega.com
SECTION 5. FIREFIGHTING MEASURES SECTION 16. OTHER INFORMATION
HMIS?HAZARD RATINGS
AUTOIGNITION: Not Available
HMIS?ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risk, and
FLASH POINT: >200癋
4 representing significant hazards or risks. Although HMIS?ratings are not required on MSDSs
EXTINGUISHING MEDIA: Foam, Water spray or fog, CO2 Dry Chemical; Do
by OSHA's 290 CFR 1910.1200, we choose to provide them as a service to our customers
not use direct water stream on burning liquid.
using HMIS? These ratings are to be used only with a fully implemented HMIS? program. To deal
SPECIAL FIREFIGHTER PROCEDURES: A self contained breathing apparatus and suitable
adequately with the safe handling of this material, all the information contained in this MSDS
protective clothing should be worn in fire
must be considered.
conditions. Cool exposed equipment with water
spray. NPCA recommends that employers must determine appropriate PPE for the actual conditions
FIRE & EXPLOSION HAZARDS: Combustion at high temperatures. Combustion will under which this product is used in their workplace. For information on PPE codes, consult the
evolve toxic and irritant vapors. Polymerization may HMIS? Implementation Manual.
take place at elevated temperatures.
When two ratings are provided for Health, the first represents the material "as supplied", and the
HAZARDOUS COMBUSTIBLE PRODUCTS: Thermal decomposition products are hazardous
second represents the material "in use"
and/or toxic. Carbon monoxide, Carbon dioxide.
* = chronic health hazard
Aldehydes
LOWER EXPLOSION LIMIT (5): Not Applicable
HMIS? is a registered trademark of the National Paint and Coatings Association (NPCA).
HIGHER EXPLOSION LIMIT (5) Not Applicable
HEALTH FLAMMABILITY PHYSICAL HAZARD
SECTION 6. ACCIDENTAL RELEASE MEASURES 3 1 0
Recommended use Adhesive
SPILL AND LEAK PROCEDURES: Evacuate immediate area and dike area to contain spill. MSDS Date December 07, 2007
Extinguish open flames and ignition sources in the immediate area. Wear proper protective For Information Contact: OMEGA Engineering, Inc.
clothing, gloves, and splash goggles. Absorb as much of spilled material as possible with rags, (203) 359-1660
sand, vermiculite or other absorbent material. Scrape absorbed material into designated waste Changes since previous issue Section 2; Section 3
containers. Wash area throughly with detergent and rinse, taking care to prevent runoff into
drains or other waterways. All spilled material, absorbed waste and wash water must be
disposed of in accordance with all Federal, state and local regulations.
For safety and environmental precautions, please review entire Material Safety Data Sheet for
necessary information.
SECTION 7. HANDLING AND STORAGE
STORAGE TEMPERATURE: 25癈
SHELF LIFE (Days): 365
HANDLING/STORAGE: Keep containers properly sealed when not in use.
SENSITIVITY TO STATIC ELECTRICITY: No
SPECIAL SENSITIVITY: Avoid excessive heat.
SENSITIVITY TO MECHANICAL IMPACT: No
OTHER PRECAUTIONS: This material should not be spilled, dumped, or
flushed into sewers or public waterways.
2 of 8 7 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part A) OB-101 (Part A)
Rev. Date 12/07/07 Rev. Date 12/07/07
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega. com omega.com
e-mail: info@omega.com e-mail: info@omega.com
SECTION 15. REGULATORY INFORMATION SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION)
TSCA: All components are on the TSCA VENTILATION REQUIREMENTS: Provide local exhaust ventilation system to meet published
inventory exposure limits.
CANADIAN DOMESTIC SUBSTANCE LIST (DSL): Is on DSL EYE PROTECTION REQUIREMENTS: Wear safety glasses with side shields.
China (IECSC): On the IECSE Inventory. GLOVE REQUIREMENTS: Employees must wear appropriate protective gloves to
prevent contact with this substance. Nitrile rubber or
Australia (AICS): On the AICS Inventory
FKM gloves are recommended. Cotton or other
Korea (KECI): On the KECI Inventory absorbent gloves should not be worn.
Philippines (PICCS): On the PICCS Inventory CLOTHING REQUIREMENTS: Employee must wear appropriate protective clothing
and equipment to prevent any possibility of skin contact
SARA - Section 313 (Superfund Amendments and Reauthorization act of 1986 - 40CFR 372)
with this substance.
Contains no substances at or above the reporting threshold under Section 313.
CHANGE/REMOVAL OF CLOTHING: Remove contaminated clothing and launder before
CALIFORNIA PROPOSITION 65 reuse.
WARNING: This product contains following chemicals that are known to the state of California to
WASH REQUIREMENTS: Wash exposed areas with soap and water.
cause cancer, birth defects or other reproductive harm.
RESPIRATOR REQUIREMENTS: NIOSH approved respirator if required. Self-contained
Unless a concentration is specified in Section 2 of the MSDS, the below chemical/s are present
breathing apparatus in emergency and non-routine
in trace amounts.
situations.
COMPONENT CAS NUMBER
Phenyl glycidyl ether 122-60-1
Epichlorohydrin 106-89-8 SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
PURE SUBSTANCE OR MIXTURE: Mixture
PHYSICAL FORM: Paste
COLOR: White
ODOR: Slight
ODOR THRESHOLD: None Established
MOLECULAR WEIGHT: Not Applicable
OXIDIZING PROPERTIES: Not Applicable
BOILING POINT: Not Determined
SOLUBILITY IN WATER: Insoluble
PARTITION COEFFICIENT (n-octanol/water): Not Determined
SPECIFIC GRAVITY (Water=1): 1.21
EVAPORATION RATE: Not Determined
VAPOR PRESSURE (mmHg): Negligible @ 25癈
VAPOR DENSITY (air=1): >1.0
VOLATILES: <0.5%
VOLATILE ORGANIC COMPOUNDS: 5.8 g/liter
AUTOIGNITION: Not available
FLASH POINT: >200癋
6 of 8 3 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part A) OB-101 (Part A)
Rev. Date 12/07/07 Rev. Date 12/07/07
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega.com omega.com
e-mail: info@omega.com e-mail: info@omega.com
SECTION 10. STABILITY AND REACTIVITY SECTION 12. ECOLOGICAL INFORMATION
STABILITY: Stable POTENTIAL EFFECT ON ENVIRONMENT: May cause harm to aquatic organisms. Do not
STABILITY DETAIL: Material is stable under recommended storage allow to enter drains, sewers, or watercourses.
temperatures and pressures.
MOBILITY: Insoluble
MATERIALS TO AVOID: Strong acids, Strong bases, Strong oxidizers, Amines,
PERSISTENCE AND DEGRADABILITY: Not readily biodegradable
MERCAPTANS
CONDITIONS TO AVOID: Elevated temperatures POTENTIAL TO BIOACCUMULATE: The product has low potential for
bioaccumulation
HAZARDOUS DECOMPOSITION Thermal decomposition product are hazardous and/or
PRODUCTS: toxic. Carbon monoxide, carbon dioxide. Aldehydes AQUATIC TOXICITY: None Established
REACTIVITY: May polymerize with amine compounds.
SECTION 11. TOXICOLOGICAL INFORMATION SECTION 13. DISPOSAL CONSIDERATIONS
Route of Entry: Eye Contact; Skin Contact; Inhalation; Ingestion WASTE DISPOSAL METHODS: Disposal should be in accordance with local, state, or
CARCINOGEN IARC NTP OSHA SUBSTANCE national legislation.
(group) SPECIFIC REGULATION EMPTY CONTAINER WARNINGS: Empty containers may contain product residue; follow
COMPONENT MSDS and label warnings even after they have been
There is no evidence that product poses a emptied.
carcinogenic risk under normal conditions
of handling and use.
CHRONIC (Long Term) EFFECTS OF EXPOSURE
SECTION 14. TRANSPORTATION INFORMATION
EFFECTS OF CHRONIC EXPOSURE: The toxicological properties of this product have
not been fully evaluated. Use of good industrial
hygiene practices is required. Avoid direct contact This section provided for general information only. The shipping description below may not
with skin or eyes. Do not ingest or inhale. represent requirements for all modes of transportation, packaging, shipping methods or
TARGET ORGANS: Skin; Eyes locations outside the United States.
SKIN SENSITIZATION: Sensitizer. May cause allergic reaction. FOR MORE COMPLETE TRANSPORTATION REGULATORY INFORMATION PLEASE
REFER TO THE SHIPPING DOCUMENTS ACCOMPANYING THE SHIPMENT OF THIS
PRODUCT TOXICOLOGY:
PRODUCT.
PRODUCT INFORMATION: This data sheet is based on a consideration of
the properties of the constituents. DOT CLASSIFICATION: Not Regulated
COMPONENT ORAL TOXICITY NOTES ON ORAL TOXICITY ICAO/IATA CLASSIFICATION: Not classified as dangerous.
Epoxy Resin Oral LD50: Rat > 5000 mg/kg Unlikely to be hazardous if swallowed. The information provided herein may not include the impact of additional regulatory
COMPONENT DERMAL TOXICITY NOTES ON DERMAL TOXICITY requirements (eg., for materials meeting the definition of a hazardous waste under RCRA,
Epoxy Resin Dermal LD50: Rabbit > 6000 Repeated or prolonged skin contact may hazardous substances under CERCLA, and/of marine pollutants under CWA or other similar
mg/kg result in moderate irritation. Repeat and/or federal, state or local laws) or any associated exceptions or exemptions under regulations
prolonged contact may cause skin applicable to the transport of this material.
sensitization.
COMPONENT INHALATION TOXICITY NOTES ON INHALATION TOXICITY
Epoxy Resin Unlikely to be hazardous by inhalation
because of the low vapor pressure of the
material at ambient temperature.
COMPONENT NOTES ON EYE IRRITATION
Epoxy Resin May cause eye irritation.
4 of 8 5 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part B) OB-101 (Part B)
Rev. Date 01/11/08 Rev. Date 01/11/08
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega.com? omega.com?br>
e-mail: info@omega.com e-mail: info@omega.com
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
SECTION 16. OTHER INFORMATION
HMIS?HAZARD RATINGS PRODUCT NAME: OMEGABOND 101 (Part B)
HMIS?ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risk, and
CHEMICAL FAMILY: Epoxy Adhesive (Hardener)
4 representing significant hazards or risks. Although HMIS?ratings are not required on MSDSs
GENERAL DESCRIPTION: Two-part Epoxy Resin; "A" Component (White)
by OSHA's 290 CFR 1910.1200, we choose to provide them as a service to our customers
using HMIS? These ratings are to be used only with a fully implemented HMIS? program. To deal SUPPLIER: OMEGA Engineering, Inc.
adequately with the safe handling of this material, all the information contained in this MSDS ADDRESS: PO Box 4047
must be considered. Stamford, CT 06907
TELEPHONE: (203) 359-1660
NPCA recommends that employers must determine appropriate PPE for the actual conditions
under which this product is used in their workplace. For information on PPE codes, consult the
HMIS? Implementation Manual.
SECTION 2. HAZARDS IDENTIFICATION
When two ratings are provided for Health, the first represents the material "as supplied", and the
second represents the material "in use"
EMERGENCY OVERVIEW
* = chronic health hazard
DANGER!
Possible cancer hazard.
HMIS? is a registered trademark of the National Paint and Coatings Association (NPCA).
CORROSIVE. CAUSES SEVERE OR PERMANENT DAMAGE TO THE EYES.
HEALTH FLAMMABILITY PHYSICAL HAZARD SEVERE SKIN IRRITANT. MAY CAUSE PERMANENT DAMAGE.
3 1 0 HARMFUL IF INHALED.
EYE IRRITANT.
Recommended use Adhesive HARMFUL IF SWALLOWED.
MSDS Date January 11, 2008 RESPIRATORY SENSITIZER.
For Information Contact: OMEGA Engineering, Inc. SKIN SENSITIZER.
(203) 359-1660 White Paste Amine Odor
Changes since previous issue Scetion 2; Section 3
EYE: Extremely severe irritant/corrosive. May cause severe burns which could lead to
permanent damage or total loss of vision. The vapor and the liquid may cause burnng, intense
irritation and excessive watering of the eye.
SKIN CONTACT: Severely irritating; may cause permanent skin damage. Can be rapidly
absorbed through skin. Repeated and/or prolonged contact may cause skin sensitization.
The information contained herein is based upon data considered true and accurate. However,
INHALATION: Vapor or aerosol, if generated, can cause irritation of the eyes, nose, and
OMEGA makes no warranties, express or implied, as to the accuracy or adequacy of the
respiratory tract. Possible respiratory sensitizer. Avoid breathing vapors or mists. Exposure to
information contained herein or the results to be obtained from the use thereof. This information
high concentrations may produce lung damage.
is offered solely for the user's consideration, investigation and verification. Since the use and
conditions of use of this information and the material described herein are not within the control INGESTION: Severe irritation to mouth, throat, and stomach.
of OMEGA, OMEGA assumes no responsibility for injury to the user or third persons. The
material described herein is sold only pursuant to OMEGA's Terms and Conditions of Sale,
including those limiting warranties and remedies contained herein, it is the responsibility of the
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
user to determine whether any use of this data and information is in accordance with applicable
federal, state or local laws and regulations.
CHEMICAL FAMILY: Formulated Epoxy Resin
?Copyright 2008 OMEGA ENGINEERING, INC., ALL RIGHTS RESERVED. PRINTED IN U.S.A.
COMPONENT CAS NUMBER CONCENTRATION
(% by weight)
3.3' Oxybis(ethyleneoxy)bis(propylamine) 4246-51-9 10-20
Epoxy resin PROPRIETARY 5-10
Titanium dioxide 13463-67-7 <0.5
1 of 8
8 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part B) OB-101 (Part B)
Rev. Date 01/11/08 Rev. Date 01/11/08
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega.com? omega.com?br>
e-mail: info@omega.com e-mail: info@omega.com
SECTION 15. REGULATORY INFORMATION
SECTION 4. FIRST AID MEASURES
TSCA: All components are on the TSCA
EYE: Immediately irrigate with eyewash solution or clean water, holding the eyelids apart, for at
inventory
least 15 minutes. Obtain immediate medical attention.
Canadian Domestic Substance List (DSL): Is on DSL
SKIN CONTACT: Immediately flush with large amounts of water; use soap if available. Remove
contaminated clothing, including shoes, after flushing has begun. Obtain immediate medical Philippines (PICCS): On the PICCS Inventory
attention.
EINECS: All components of this product are listed
INHALATION: Remove to fresh air. If breathing is difficult, give oxygen. if breathing has
in EINECS or ELINCS, or otherwise
stopped, give artificial respiration. Get medical attention.
exempt from EU notification
INGESTION: If individual is conscious, give water to dilute stomach contents. Get prompt requirements.
medical attention. DO NOT attempt to give anything by mouth to an unconscious person.
SARA - Section 313 (Superfund Amendments and
Reauthorization act of 1986 - 40CFR 372)
Contains no substances at or above the reporting
SECTION 5. FIREFIGHTING MEASURES
threshold under Section 313.
CALIFORNIA PROPOSITION 65
AUTOIGNITION: Not Available
WARNING: This product contains following chemicals that are known to the state of California to
FLASH POINT: >200癋 cause cancer, birth defects or other reproductive harm.
Unless a concentration is specified in Section 2 of the MSDS, the below chemical/s are present
EXTINGUISHING MEDIA: CO2; Dry Chemical; Water Spray
in trace amounts.
SPECIAL FIREFIGHTER PROCEDURES: Firefighters should be equipped with self-
contained breathing apparatus to protect against COMPONENT CAS NUMBER
potientially toxic and irritating fumes. Phenyl glycidyl ether 122-60-1
Epichlorohydrin 106-89-8
FIRE & EXPLOSION HAZARDS: A self contained breathing apparatus and suitable
protective clothing should be worn in fire
conditions.
HAZARDOUS COMBUSTIBLE PRODUCTS: Carbon dioxide, carbon monoxide, oxides of
nitrogen and unknown organics. Aldehydes
LOWER EXPLOSION LIMIT (5): Not Applicable
HIGHER EXPLOSION LIMIT (5) Not Applicable
SECTION 6. ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK PROCEDURES: Absorb spillages onto sand, earth, or any suitable
absorbent material.
Sweep up and shovel into waste drums. Wash the
spillage area with water.
For safety and environmental precautions, please review entire Material Safety Data Sheet for
necessary information.
2 of 8 7 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part B) OB-101 (Part B)
Rev. Date 01/11/08 Rev. Date 01/11/08
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega. com? omega.com?br>
e-mail: info@omega.com e-mail: info@omega.com
SECTION 7. HANDLING AND STORAGE
SECTION 11. TOXICOLOGICAL INFORMATION (CONT'D) STORAGE TEMPERATURE: 25癈
SHELF LIFE (Days): 365
COMPONENT NOTES ON EYE IRRITATION HANDLING/STORAGE: Store in cool, dry place. Keep ina well ventilated
3.3'- Extremely severe irritant/corrosive. May place.
Oxybis (ethyleneoxy) cause severe burns which could lead to
SENSITIVITY TO STATIC ELECTRICITY: No
bis (propylamine) permanent damage or total loss of vision.
SPECIAL SENSITIVITY: Keep away from heat.
Epoxy Resin May cause eye irritation.
SENSITIVITY TO MECHANICAL IMPACT: No
SECTION 12. ECOLOGICAL INFORMATION
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION)
POTENTIAL TO BIOACCUMULATE Unknown
COMPONENT EXPOSURE LIMITS
AQUATIC TOXICITY: None Established
ACGIH OSHA Mfg Working
Standard
Titanium dioxide 10 mg/m3 TWA 15 mg/m3 TWA
(total dust)
SECTION 13. DISPOSAL CONSIDERATIONS
VENTILATION REQUIREMENTS: Local exhaust.
WASTE DISPOSAL METHODS: Disposal should be in accordance with local, state, or EYE PROTECTION REQUIREMENTS: Wear safety glasses with side shields.
national legislation.
GLOVE REQUIREMENTS: The use of chemically resistant gloves is recommended.
EMPTY CONTAINER WARNINGS: Empty containers may contain product residue; follow
CLOTHING REQUIREMENTS: Employee must wear appropriate protective clothing and
MSDS and label warnings even after they have been
equipment to prevent any possibility of skin contact with this substance.
emptied.
CHANGE/REMOVAL OF CLOTHING: Remove contaminated clothing and launder before
reuse.
WASH REQUIREMENTS: Wash before eating, drinking, or using toilet facilities.
SECTION 14. TRANSPORTATION INFORMATION
RESPIRATOR REQUIREMENTS: Local exhaust.
This section provided for general information only. The shipping description below may not
represent requirements for all modes of transportation, packaging, shipping methods or
locations outside the United States.
FOR MORE COMPLETE TRANSPORTATION REGULATORY INFORMATION PLEASE
REFER TO THE SHIPPING DOCUMENTS ACCOMPANYING THE SHIPMENT OF THIS
PRODUCT.
DOT CLASSIFICATION: Not Regulated
ICAO/IATA CLASSIFICATION: Not classified as dangerous.
The information provided herein may not include the impact of additional regulatory
requirements (eg., for materials meeting the definition of a hazardous waste under RCRA,
hazardous substances under CERCLA, and/of marine pollutants under CWA or other similar
federal, state or local laws) or any associated exceptions or exemptions under regulations
applicable to the transport of this material.
6 of 8 3 of 8
MATERIAL SAFETY DATASHEET MATERIAL SAFETY DATASHEET
MSDS-0107 MSDS-0107
OB-101 (Part B) OB-101 (Part B)
Rev. Date 01/11/08 Rev. Date 01/11/08
One Omega Drive One Omega Drive
Supersedes: 07/06 Supersedes: 07/06
Stamford, CT 06907-0047 Stamford, CT 06907-0047
omega.com? omega.com?br>
e-mail: info@omega.com e-mail: info@omega.com
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES SECTION 10. STABILITY AND REACTIVITY
PURE SUBSTANCE OR MIXTURE: Mixture Stability: Stable
PHYSICAL FORM: Paste Stability Detail: Material is stable under normal storage temperatures and pressures.
COLOR: White Materials to Avoid: Strong oxidizers, Strong Lewis acids, Mineral acids
ODOR: Amine Conditions to Avoid: Elevated Temperatures
ODOR THRESHOLD: Not Available Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, oxides of nitrogen
and unknown organics. Aldehydes
OXIDIZING PROPERTIES: Not Applicable
SOLUBILITY IN WATER: Soluble
PARTITION COEFFICIENT (n-octanol/water): Not determined
SECTION 11. TOXICOLOGICAL INFORMATION)
SPECIFIC GRAVITY (Water=1): 2.000
EVAPORATION RATE: Not Applicable Route of Entry: Skin Contact; Eye Contact; Ingestion
VAPOR PRESSURE (mmHg): Negligible @ 25癈 CARCINOGEN IARC NTP OSHA SUBSTANCE
(group) Specific Regulation
VAPOR DENSITY (air=1): Not Applicable
COMPONENT
VOLATILES: Negligible Titanium dioxide Yes (2B) No Not Listed
VOLATILE ORGANIC COMPOUNDS: Negligible CHRONIC (Long Term) EFFECTS OF EXPOSURE
AUTOIGNITION: Not Available TARGET ORGANS: Eyes; Skin; Respiratory system.
FLASH POINT: >200癋 RESPIRATORY SENSITIZATION: Sensitizer. May cause allergic reaction.
SKIN SENSITIZATION: Sensitizer. May cause allergic reaction.
PRODUCT TOXICOLOGY
PRODUCT INFORMATION: This health hazard asessment is based on
consideration of the composition of this product.
COMPONENT ORAL TOXICITY NOTES ON ORAL TOXICITY
3.3'- Oral LD50: Rat 3160 mg/kg Corrosive to mouth, throat and stomach.
Oxybis (ethyleneoxy)
bis(propylamine)
Epoxy Resin Oral LD50: Rat >5000 mg/kG Unlikely to be hazardous if swallowed.
COMPONENT DERMAL TOXICITY NOTES ON DERMAL TOXICITY
3.3'- Dermal LD50: Rat > 2150 Corrosive
Oxybis (ethyleneoxy) mg/kg
bis(propylamine) Dermal LD50: Rat > 2500 mg/kg
Epoxy Resin Dermal LD50: Rat > 6000 Repeat or prolonged skin contact may
mg/kg result in moderate irritation. Repeat and/or
perlonged contact may acause skin
COMPONENT INHALATION TOXICITY NOTES ON INHALATION TOXICITY
3.3'- Inhalation of dust or vapor may cause severe
Oxybis (ethyleneoxy) irritation to the nasal passages and/or the
bis(propylamine) respiratory and/or the respiratory sysem.
Epoxy Resin Unlikely to be hazardous by inhalation
because of the low vapor pressure of the
material at ambient temperature.
4 of 8 5 of 8
|