MATERIAL SAFETY DATA SHEET







                     THAI ORGANIC CHEMICALS CO., LTD. (EPOXY DIVISION)



                                            EPOTEC RD 104





1. IDENTIFICATION OF SUBSTANCE



   Trade Name:         EPOTEC RD 104

   Manufacturer/Supplier: Thai OrganicAditya Birla Chemicals (Epoxy Division) 16th Floor Mahathun

                                         Chemicals Co., Ltd.

   Plaza Building, 888/160 - 161 Pleonchit Road, Lumpini, Pathumwan, Bangkok 10330 Thailand.

   Tel: (662) 2535031-3, 2536882, Fax: (662) 2535030, Web site: www.thaiepoxy.com

   For additional information: Development Department, E-mail: epotec@thaiepoxy.com



2. COMPOSITIONS AND INFORMATION ON INGREDIENTS



                             Component                                  CAS Number                 %

    Phenyl glycidyl ether                                                  122-60-1               100



3. HAZARD IDENTIFICATION



   Eyes:         Severe eye irritant.

   Skin:         Possible skin irritant and sensitizer. Can be absorbed through skin.

   Ingestion:    Will cause illness

   Inhalation:   May cause an allergic reaction.



4. FIRST AID



   Eyes:         Immediately flush eyes with running water for at least 30 minutes. Visit doctor.

   Skin:         Remove contaminated clothing immediately. Wash skin with soap and water.

   Ingestion:    Induce vomiting only if person is conscious. Visit doctor.

   Inhalation:   Remove to fresh air. Give oxygen &/or artificial respiration if needed. Call physician.



5. FIRE FIGHTING MEASURES



                                                               >200oF (closed cup)

   Flammable Properties:     Flash point

                             Auto ignition temperature         Not applicable

   Flammability Limits:      LFL                               Not applicable

                             UFL                               Not applicable

   Extinguishing media: Foam, water fog, dry chemical, carbon dioxide preferred.

   Protective equipment: Wear full protective clothing including self-contained breathing apparatus.

   Special hazards: High temperature will cause combustion.



6. ACCIDENTAL RELEASE MEASURES



   Personal precautions: Avoid contact with eyes and skin. Provide sufficient ventilation. Wear

   protective clothing when taking up spill.

   Environmental precautions: Prevent from entering sewer system, surface water or soil.

   Methods for cleaning up: If recovery is not feasible, admix with dry soil, and or non-reactive

   absorbent and place in an appropriate chemical waste container. Transfer to containers by

   suction, preparatory for later disposal. Place in metal containers for recovery or disposal. Flush

   area with water spray. Clean-up personnel must be equipped with self contained breathing

   apparatus and butyl rubber protective clothing. For large spills, recover spilled material with a

   vacuum truck.









MSDS EPOTEC RD 104                                  Page 1 of 3                          Effective Date: November, 2004

MATERIAL SAFETY DATA SHEET







7. HANDLING AND STORAGE



   Handling: Avoid contact with skin or eyes. Keep containers closed when empty.

   Storage: Store in cool, dry, ventilated storage and in closed containers. Store away from

   ignition sources.



8. EXPOSURE CONTROLS AND PERSONAL PROTECTION



   Exposure Guideline(s):       Phenyl glycidyl ether TVL   1 ppm, PEL       1 ppm

   Respiratory protection:      If vapors are present, use a NOISH/MSHA approved positive

   pressure, supplied air respirator.

   Eye protection:     Use splash proof chemical goggles.

   Skin protection: Do not allow any skin contact. If potential for skin contact is present,

   impervious protection clothing should be worn. Neoprene coated fabric is recommended for this

   application.



9. PHYSICAL AND CHEMICAL PROPERTIES



   Appearance:                           Clear transparent liquid.

   Color:                                Colorless.

   Odor:                                 Aromatic.

   pH value:                             7.00

                                         < 0.1mmHg (25oC)

   Vapor pressure:

   Vapor density:                        5.1 (Air = 1)

                                         473oF

   Boiling point:

   Melting point:                        Not applicable.

   Specific gravity:                     1.1 (Water = 1)

   Solubility in water:                  Slight



10. STABILITY AND REACTIVITY



   Stability: Stable under storage conditions.

   Materials to avoid: Strong oxidizers, Acids and Bases.

   Hazardous materials produced upon decomposition: Combustion may form toxic materials,

   such as carbon dioxide, carbon monoxide.



11. TOXICOLOGICAL INFORMATION



   Acute Oral Toxicity (LD50/Rat):               3850 mg/kg

   Acute Dermal Toxicity (LD50/Rat):             2160 mg/kg

   Acute Inhalation Toxicity (LC50/Rat):         > 100 ppm/ 8 Hr



12. ECOLOGICAL INFORMATION



   Degradation:           Not readily biodegradable

   Ecotoxicity:           Ecological injuries are not known or expected under normal use.



13. DISPOSAL CONSIDERATIONS



   Disposal: Do not dump into any sewers, on the ground, or into any body of water. All disposal

   methods must be in compliance with all applicable federal, state/provincial and local laws and

   regulations. Regulations may vary in different locations. Waste characterizations and compliance

   with applicable laws are the responsibility solely of the waste generator.









MSDS EPOTEC RD 104                                 Page 2 of 3                        Effective Date: November, 2004

MATERIAL SAFETY DATA SHEET







14. TRANSPORT INFORMATION



   Department of Transportation:        49CFR172.101-102 Classification:          Corrosive Class: 8



   DOT Shipping Name:                   Corrosive liquid, n.o.s. (Phenyl Glydcidyl Ether)

                                        Class:           8

                                        UN:              1760

                                        PG:              III



15. REGULATORY INFORMATION



   Notice: The information herein is presented in good faith and believed to be accurate as of the

   effective date shown above. However, no warranty, express or implied, is given. Regulatory

   requirements are subject to change and may differ from one location to another; it is the buyer `s

   responsibility to ensure that its activities comply with federal, state or provincial and local laws.

   The following specific information is made for the purpose of complying with numerous federal,

   state or provincial and local laws and regulations.

   U.S. REGULATIONS:

   TOXIC SUBSTANCES CONTROL ACT (TSCA): All components of this product are contained on

   the Chemical Substance Inventory List.

   EPA HAZARD CLASSIFICATIONS:

        Acute Hazard. Chronic Hazard.

   CANADIAN REGULATIONS:

   The Canadian Workplace Hazardous Materials Information System (WHMIS): Classification

   for this product is:

        Class D Division 2A



16. OTHER INFORMATION



   The information presented herein is based on data considered to be accurate as of date of

   preparation of the Material Safety Data Sheet. However, no warranty or representation, express or

   implied, is made as to the accuracy or completeness of the foregoing data and safety information,

   nor is any authorization given or implied to practice any patented invention without a license. In

   addition, no responsibility can be assumed by vendor for any damage or injury resulting from

   abnormal use, from any failure to adhere to recommended practices, or from any hazards inherent

   in the nature of the product.









MSDS EPOTEC RD 104                                Page 3 of 3                         Effective Date: November, 2004